- New
16013 CT 65x100x11 mm is a single row deep groove ball bearing from the narrow 16000 series. Inner diameter 65 mm, outer diameter 100 mm and width 11 mm. Its compact axial design makes it suitable for appropriately designed mechanical assemblies with limited installation space. It accommodates radial loads and limited axial loads in both directions. CT designation, internal clearance, cage and seals require confirmation. Specialist B2B platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Full designation |
16013 CT |
|
Brand indicated in designation |
CT |
|
Bearing type |
Deep groove ball bearing |
|
Design |
Single row |
|
Dimensional series |
16000 |
|
Inner diameter (d) |
65 mm |
|
Outer diameter (D) |
100 mm |
|
Width (B) |
11 mm |
|
Nominal dimensions |
65x100x11 mm |
|
Rolling elements |
Balls |
|
Primary load direction |
Radial |
|
Axial load capability |
Both directions, within permissible limits |
|
Seals / Shields |
Not confirmed |
|
Internal clearance |
Not confirmed |
|
Cage material |
Not confirmed |
|
Precision class |
Not confirmed |
Important information about CT: Without the manufacturer's documentation, it cannot be definitively established whether CT represents a commercial brand or a special bearing designation.
The full designation 16013 CT has therefore been retained without assigning unverified construction features or technical parameters.
The designation identifies the bearing series, dimensional size and an additional marking.
16013 - basic designation of a single row deep groove ball bearing from the 16000 series.
16 - identifies a dimensional series of deep groove ball bearings with a relatively narrow cross-section.
013 - the size designation corresponding to a nominal bore diameter of 65 mm.
CT - additional designation requiring confirmation in the manufacturer's catalogue.
65x100x11 mm - inner diameter, outer diameter and bearing width.
The 16013 bearing has standard nominal dimensions of 65x100x11 mm.
However, identical dimensions do not guarantee identical technical characteristics across different manufacturers or bearing versions.
A single row deep groove ball bearing consists of an inner ring, outer ring, rolling balls and a cage that maintains the correct spacing between the rolling elements.
The balls roll along the raceways of the inner and outer rings, reducing friction between rotating machine components.
This construction provides:
Radial load carrying capability.
Ability to accommodate limited axial loads in both directions.
Relatively low rolling friction.
Suitability for assemblies with restricted axial installation space.
Shaft support in appropriately designed mechanical systems.
Actual load carrying capacity depends on the internal bearing design, materials, clearance, lubrication and operating conditions.
The 16000 series includes single row deep groove ball bearings with a relatively narrow width compared with many bearings from the 6000 and 6200 series.
The 16013 bearing has a width of only 11 mm, with an inner diameter of 65 mm and outer diameter of 100 mm.
This narrow construction can be particularly useful where axial installation space is limited.
However, the reduced width does not mean that the 16013 bearing can directly replace wider bearings from other dimensional series.
Before selecting the 16013 CT bearing, verify:
Full designation 16013 CT.
Shaft diameter of 65 mm.
Housing bore diameter of 100 mm.
Available installation width of 11 mm.
Required radial load capacity.
Magnitude and direction of axial loads.
Operating rotational speed.
Required internal clearance.
Lubrication method.
Presence of seals or shields.
Required bearing precision.
Meaning of the CT designation in the manufacturer's documentation.
Bearings with identical nominal dimensions may differ in load ratings, cage design, internal clearance, sealing arrangement and permissible rotational speed.
Interchangeability must be confirmed using the complete bearing designation and actual operating conditions.
Deep groove ball bearings from the 16000 series may be used in appropriately designed:
Gearboxes and drive mechanisms.
Industrial machinery.
Rotating shaft support systems.
Equipment with restricted axial installation space.
Mechanical assemblies requiring narrow bearing widths.
These are general applications of the bearing series and do not represent confirmed equipment compatibility for the specific 16013 CT product.
|
Designation |
Dimensions |
Distinguishing Feature |
|---|---|---|
|
16013 |
65x100x11 mm |
Basic bearing designation |
|
16013 C3 |
65x100x11 mm |
Greater than normal radial internal clearance |
|
16013 2RS |
65x100x11 mm |
Contact seals on both sides |
|
16013 ZZ |
65x100x11 mm |
Metal shields on both sides |
|
16013 CT |
65x100x11 mm |
CT designation requiring construction verification |
Some distributor catalogues also list the designation 16013 2RS CT.
This indicates that a bearing explicitly marked 2RS CT should be distinguished from a bearing designated only 16013 CT.
The availability of individual variants depends on the manufacturer and supplier.
Before installation, inspect the shaft and housing bore surfaces and verify their dimensional tolerances.
When mounting the bearing, installation force should be applied only to the ring being fitted with an interference fit.
Mounting force must not be transmitted through the rolling balls, as this may damage the raceways.
Correct operation requires appropriate lubrication, protection against contamination and avoidance of excessive loads or shaft misalignment.
The lubricant type and relubrication interval should be selected according to the operating conditions and manufacturer's recommendations.
What are the dimensions of the 16013 CT bearing?
The bearing has an inner diameter of 65 mm, outer diameter of 100 mm and width of 11 mm.
What type of bearing is 16013?
16013 is a single row deep groove ball bearing belonging to the relatively narrow 16000 dimensional series.
What does CT mean in 16013 CT?
The CT designation requires confirmation using the manufacturer's catalogue. It should not automatically be interpreted as a specific clearance class, cage material or precision grade.
Can the 16013 bearing accommodate axial loads?
Yes. Deep groove ball bearings can accommodate radial loads and limited axial loads in both directions, within their permissible operating limits.
Does 16013 CT have rubber seals?
This has not been confirmed. Bearings designated 2RS normally feature contact seals on both sides, but these should not automatically be assumed for the 16013 CT version.
Can 16013 CT be replaced with 16013 C3?
Not automatically. C3 indicates greater than normal radial internal clearance. This version must meet the requirements of the intended application.
Is the 16013 bearing suitable for high rotational speeds?
Deep groove ball bearings can operate at relatively high speeds. However, the permissible speed of the specific 16013 CT bearing must be confirmed using manufacturer data.
Can 16013 CT be replaced with a bearing from another manufacturer?
This may be possible after verifying dimensions, construction, internal clearance, sealing arrangement, load ratings and operating requirements.
16013 CT is a single row deep groove ball bearing measuring 65x100x11 mm and belonging to the narrow 16000 series. It is designed to accommodate radial loads and limited axial loads in both directions. Selection requires confirmation of the CT designation, internal clearance, cage construction, sealing arrangement and operating parameters.
Available through the specialist B2B platform simmering.pl, with worldwide shipping from stock in Poland.
Data sheet
You might also like