KINEX 6002 2RS 15x32x9 mm is a single-row deep groove ball bearing with rubber seals on both sides and normally supplied with standard radial internal clearance. The catalog 6002-2RSR execution has a dynamic load rating of 5.58 kN, static load rating of 2.85 kN and grease-lubricated limiting speed of 14,000 rpm. It accommodates radial and limited axial loads in both directions. Specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Manufacturer |
KINEX |
|
Product designation |
6002 2RS |
|
Bearing type |
Deep groove ball bearing |
|
Construction |
Single row |
|
Dimensional series |
60 |
|
Bore diameter d |
15 mm |
|
Outside diameter D |
32 mm |
|
Width B |
9 mm |
|
Nominal dimensions |
15x32x9 mm |
|
Bore type |
Cylindrical |
|
Rolling elements |
Balls |
|
Number of rows |
1 |
|
Sealing arrangement |
Rubber seals on both sides, 2RS |
|
Radial internal clearance |
Normal CN, unless otherwise specified |
|
Bearing construction |
Non-separable |
|
Load directions |
Radial and limited axial loads in both directions |
|
Self-aligning capability |
No |
The designation 6002 identifies a single-row deep groove ball bearing with dimensions of 15x32x9 mm.
6 - deep groove ball bearing.
0 - dimensional series 60.
02 - bore diameter code corresponding to 15 mm.
Code 02 is one of the standard exceptions in the metric bearing bore designation system.
|
Bore code |
Bore diameter |
|---|---|
|
00 |
10 mm |
|
01 |
12 mm |
|
02 |
15 mm |
|
03 |
17 mm |
|
04 |
20 mm |
The 60 series has a relatively small cross-section, allowing compact bearing arrangements.
The 2RS designation indicates two rubber seals, one fitted on each side of the bearing.
KINEX catalog nomenclature also uses the designation 2RSR for executions with contact seals.
The primary functions of the seals include:
Restricting dust and fine contaminant ingress.
Retaining grease inside the bearing.
Protecting the balls and raceways.
Reducing lubrication maintenance requirements.
Contact seals may generate more friction than non-contact metal shields. This should be considered when selecting a bearing for higher rotational speeds.
The absence of a C3, C4 or other clearance suffix normally indicates standard internal clearance CN.
For deep groove ball bearings with a 15 mm bore diameter, standard radial internal clearance ranges before installation are:
|
Clearance class |
Range |
|---|---|
|
CN |
3-18 µm |
|
C3 |
11-25 µm |
The CN execution has a lower nominal clearance range than C3.
Operating clearance after installation depends on bearing fits, temperature and loading conditions.
KINEX 6002 2RS and KINEX 6002 2RS C3 are not automatically interchangeable, despite having identical external dimensions.
The inner ring has a cylindrical bore with a nominal diameter of 15 mm.
Its deep raceway interacts with the balls and transfers loads from the shaft to the rolling elements.
With an interference fit, the inner ring expands slightly, reducing radial internal clearance.
For a normal-clearance execution, it is particularly important to verify that sufficient operating clearance remains after installation.
The outer ring has a nominal outside diameter of 32 mm.
It transfers loads from the balls to the housing and provides guidance for the rolling elements.
Ring deformation caused by incorrect fits or housing geometry can adversely affect load distribution.
One row of balls operates between the deep raceways of both rings.
The cage maintains appropriate spacing between the balls and limits direct ball-to-ball contact.
Pressed steel cages are commonly used in bearings of this type. The cage material of the specific KINEX 6002 2RS production execution should be confirmed in the manufacturer's documentation.
The double-sided seals restrict contaminant ingress into the rolling contact area.
They also help retain grease and protect the raceway surfaces against premature wear caused by abrasive particles.
However, this does not guarantee resistance to immersion in water, intensive high-pressure washing or aggressive chemicals.
For the KINEX 6002-2RSR execution, the manufacturer's catalog specifies the following parameters:
|
Parameter |
Value |
|---|---|
|
Basic dynamic load rating Cr |
5.58 kN |
|
Basic static load rating C0r |
2.85 kN |
|
Fatigue load limit Cu |
0.130 kN |
|
Limiting speed, grease lubrication |
14,000 rpm |
|
Minimum chamfer dimension r |
0.3 mm |
|
Catalog mass |
0.030 kg |
These values refer to the catalog 6002-2RSR execution. The commercial designation 6002 2RS should be checked against the manufacturer's marking on the bearing and packaging.
KINEX 6002 2RS is primarily designed to accommodate loads acting perpendicular to the shaft axis.
The basic dynamic load rating Cr = 5.58 kN is used in fatigue life calculations.
The basic static load rating C0r = 2.85 kN is used to evaluate the risk of permanent deformation at the ball-to-raceway contact surfaces.
These values do not represent maximum permissible loads under every operating condition.
A deep groove ball bearing can accommodate limited axial loads in both directions.
The permissible axial force depends on radial loading, operating clearance, rotational speed and lubrication conditions.
When radial and axial forces act simultaneously, the equivalent dynamic bearing load P must be calculated using the appropriate catalog factors.
For ball bearings:
Where:
L10 - basic rating life in millions of revolutions.
C - basic dynamic load rating.
P - equivalent dynamic bearing load.
For example, with a purely radial load of 1.0 kN:
The result is approximately 173.7 million revolutions of basic rating life L10. This is a calculated value, not a guaranteed service life.
For the sealed KINEX 6002-2RSR execution, the catalog specifies a limiting speed of 14,000 rpm with grease lubrication.
The open 6002 version has a catalog limiting speed of 23,000 rpm with grease lubrication.
The difference is partly attributable to friction generated by the contact seals.
The limiting speed does not mean that the bearing can operate continuously at this value regardless of load and temperature.
The sealed execution is designed to operate with grease retained inside the bearing.
In typical applications, these bearings are supplied factory greased and do not require routine relubrication.
The exact grease type and its permissible temperature range should be confirmed for the specific product batch.
During operation, the inner ring may reach a higher temperature than the outer ring.
Differences in thermal expansion can reduce operating clearance.
For a normal-clearance execution, this effect must be considered particularly carefully when tight mounting fits are used.
|
Designation |
Dimensions |
Construction difference |
|---|---|---|
|
KINEX 6002 2RS |
15x32x9 mm |
Rubber seals, normal clearance |
|
KINEX 6002 2RS C3 |
15x32x9 mm |
Rubber seals, C3 clearance |
|
KINEX 6002 ZZ |
15x32x9 mm |
Metal shields on both sides |
|
KINEX 6002 |
15x32x9 mm |
Open construction |
|
KINEX 6001 2RS |
12x28x8 mm |
Smaller dimensions |
|
KINEX 6202 2RS |
15x35x11 mm |
Larger outside diameter and width |
|
KINEX 6302 2RS |
15x42x13 mm |
Larger cross-section |
Both variants have identical dimensions and double-sided seals.
They differ in internal clearance. The C3 version has greater radial clearance before installation.
Substitution requires verification of mounting fits and thermal operating conditions.
The 2RS version has rubber seals, while ZZ uses metal shields.
Rubber seals provide more effective contamination protection but may generate greater friction.
Both bearings have the same 15 mm bore diameter, but their remaining dimensions differ.
KINEX 6002 2RS measures 15x32x9 mm, while KINEX 6202 2RS measures 15x35x11 mm.
They are not direct dimensional replacements.
Before ordering, verify:
KINEX 6002 2RS designation.
Dimensions of 15x32x9 mm.
Seal type.
Required radial internal clearance.
Shaft and housing fits.
Radial and axial loads.
Rotational speed.
Operating temperature.
Lubrication conditions.
Bearing life and reliability requirements.
Bearings from other manufacturers with identical dimensions may differ in seal material, grease specification, internal clearance, load ratings and permissible speed.
Matching dimensions do not automatically guarantee complete technical interchangeability.
KINEX 6002 2RS
6002 2RS KINEX
KINEX 6002-2RS
KINEX 6002-2RSR
6002-2RSR KINEX
6002 2RS 15x32x9
KINEX 6002 ball bearing
6002 2RS single-row deep groove ball bearing
The designation 6002-2RSR is used in KINEX catalog nomenclature for the execution with two rubber contact seals. Other written variations may be used as search references.
Deep groove ball bearings of the 6002 series are used in compact rotating assemblies where small installation dimensions and radial load capacity are required.
Typical applications of this bearing category include:
Small electric motors.
Fans and blowers.
Pumps.
Light-duty drive assemblies.
Conveyor mechanisms.
Workshop equipment.
Industrial automation.
Compact shaft supports.
These are general applications of the bearing category, not a confirmed OEM application list for the exact KINEX 6002 2RS product.
Deep groove ball bearings can support electric motor rotors.
Rotational speed, temperature, mounting fits and required internal clearance are important selection factors.
The seals restrict dust ingress into the bearing.
At higher speeds, additional friction and heat generation from seal contact must be considered.
Dimensions of 15x32x9 mm allow installation in equipment with limited mounting space.
The single-row construction accommodates radial and limited axial loads.
The shaft and housing should be clean and free from burrs and damage.
Check the diameters and geometry of the mounting surfaces.
Mounting fits must correspond to the direction and nature of the load.
Excessive interference can cause an excessive reduction in internal clearance.
When pressing the bearing onto a shaft, apply force to the inner ring.
When pressing the bearing into a housing, apply force to the outer ring.
Mounting force must not be transmitted through the balls.
Do not pry or damage the seals during installation.
Damage may cause grease loss and raceway contamination.
After installation, check smooth rotation and the absence of excessive resistance.
During initial operation, monitoring temperature and vibration is recommended.
Store the bearing in its original packaging in a clean, dry environment.
The bearing has a 15 mm bore diameter, 32 mm outside diameter and 9 mm width.
It indicates two rubber seals fitted on both sides of the bearing, restricting contamination and grease loss.
Without an additional clearance suffix, normal clearance CN is generally assumed. For a 15 mm bore, its standard range is 3-18 µm before installation.
For the catalog KINEX 6002-2RSR execution, the basic dynamic load rating is 5.58 kN and the basic static load rating is 2.85 kN.
The catalog limiting speed of the 6002-2RSR execution is 14,000 rpm with grease lubrication.
Not automatically. They have different internal clearance classes, so substitution requires verification of mounting fits and operating temperature.
Under typical conditions, sealed deep groove ball bearings are factory greased and designed to operate without routine relubrication.
Yes, provided that dimensions, seals, clearance, load ratings, permissible speed and other application requirements are confirmed to be compatible.
KINEX 6002 2RS is a single-row deep groove ball bearing measuring 15x32x9 mm, featuring rubber seals on both sides and normally supplied with standard radial internal clearance. The catalog KINEX 6002-2RSR execution has a dynamic load rating of 5.58 kN, a static load rating of 2.85 kN and a grease-lubricated limiting speed of 14,000 rpm. It accommodates radial and limited bidirectional axial loads.
The product is offered through the specialist B2B industrial supply platform simmering.pl, serving machinery manufacturers, technical distributors, industrial maintenance departments and procurement teams, with worldwide shipping from stock in Poland.
Data sheet