FAG 607 2RS Ball Bearing 7x19x6

Sealed Miniature Radial Bearing FAG 607 2RS - Reliable for High-Speed & Low-Friction Applications

Overview
The FAG 607 2RS 7x19x6 is a miniature deep groove ball bearing, sealed on both sides (2RS), with inner diameter 7 mm, outer diameter 19 mm, and width 6 mm. This compact design allows it to support both radial and moderate axial loads, while the dual rubber seals protect internal components from contaminants.

Key specifications & performance data

• Type: deep groove ball bearing, single row, sealed (2RS)

• Bore (d): 7 mm

• Outer diameter (D): 19 mm

• Width / thickness (B): 6 mm

• Sealing: 2RS — rubber seals on both sides, helps retain lubricant and block ingress of dust and moisture

• Series: 60 (miniature series)

• Rated speeds: up to ~22,000 rpm (depending on lubrication and application)

• Load ratings (approximate): dynamic radial ~2,600 N, static radial ~1,060 N

• Operating temperature range: typically -30 °C to +110 °C, depending on seals and grease

Why choose FAG 607 2RS 7x19x6?

• Sealed design (2RS) ensures protection against dust, dirt, and moisture - ideal for use in less-protected environments.

• Compact size with good load capacity makes it suitable for small motors, actuators, electric tools, precision instruments.

• Low friction and smooth rotation thanks to high manufacturing precision and quality materials.

• Ready-to-install — prelubricated and sealed, no need for additional maintenance in many applications.

• Brand reliability — FAG / Schaeffler is known for high standards in the bearing industry.

Typical applications
This bearing is frequently used in:

• small electric motors and pumps

• precision mechanisms in instrumentation or measurement devices

• fans, blowers, small turbines

• robotic joints or small actuators

• consumer electronics, appliances, drones

• any compact rotating assembly requiring sealed, reliable bearing under radial loads

Tips for selection & use

• Ensure shaft and housing tolerances match recommendation for series 60 miniature bearings.

• Avoid shock loads beyond bearing limits, especially in axial direction.

• When selecting a replacement, match 7x19x6 2RS and quality class.

• Maintain cleanliness during mounting and assembly; the seals are effective, but contaminants on shaft or housing can degrade service life.

• Verify that the operating speed does not exceed the bearing’s safe rpm for your lubrication.

FAQ (Frequently Asked Questions)

Q1: What does “607 2RS” mean?
“607” is the series and size code; “2RS” means the bearing is equipped with two rubber seals, one on each side, to protect against contaminants and retain lubricant.

Q2: What are the dimensions of FAG 607 2RS?
They are 7 mm bore, 19 mm outer diameter, 6 mm width.

Q3: Can this bearing handle axial (thrust) loads?
While primarily designed for radial loads, deep groove ball bearings like 607 2RS can handle moderate axial loads, especially at intermediate speeds.

Q4: Do I need to lubricate it myself?
No, the bearing is factory-lubricated and sealed, so in most conditions it requires no additional lubrication through its service life.

Q5: Are there alternative versions like “C3” or “open”?
Yes—there may be versions with increased internal clearance (C3) or without seals (open), but for typical sealed operation the 2RS version is most common.

Q6: What is the maximum speed for 607 2RS?
The limit is around 22,000 rpm, depending on the application and lubrication conditions.