SNR 608ZZC3 8x22x7 mm single-row deep groove ball bearing with two metal shields (ZZ) and increased C3 radial internal clearance. Pressed steel cage, basic dynamic load rating 3.45 kN and static load rating 1.37 kN. Thermal reference speed 32,000 rpm, mechanical limiting speed 46,000 rpm. Non-separable construction for radial and bidirectional axial loads. Specialist B2B industrial trading platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Brand |
SNR |
|
Manufacturer group |
NTN Europe |
|
Full designation |
608 ZZ C3 |
|
Bearing type |
Deep groove ball bearing |
|
Construction |
Single-row |
|
Bearing series |
608 |
|
Inside diameter (d) |
8 mm |
|
Outside diameter (D) |
22 mm |
|
Width (B) |
7 mm |
|
Rolling elements |
Balls |
|
Number of rows |
1 |
|
Shields |
Two metal shields, ZZ |
|
Shield design |
Non-contact |
|
Radial internal clearance |
C3, greater than normal |
|
Construction |
Non-separable |
|
Load directions |
Radial and axial in both directions |
|
Nominal dimensions |
8x22x7 mm |
The basic dynamic load rating C, basic static load rating C0, limiting speed, weight and cage material must be confirmed against SNR documentation for the exact 608 ZZ C3 variant rather than inferred from similar bearings.
|
Designation element |
Technical meaning |
|---|---|
|
6 |
Deep groove ball bearing |
|
608 |
Bearing series with an 8 mm bore |
|
ZZ |
Two metal shields, one on each side |
|
C3 |
Radial internal clearance greater than normal |
|
SNR |
Bearing brand |
The designation 608 identifies a miniature deep groove ball bearing with the following nominal dimensions:
d = 8 mm.
D = 22 mm.
B = 7 mm.
The standard bore-code rule of multiplying the last two digits by five does not apply to the 608 bearing designation. The 8 mm bore is defined by this particular bearing series.
The ZZ designation indicates two metal shields.
The shields are installed on both sides of the bearing and help reduce the entry of larger contaminants while retaining lubricant inside the bearing.
Unlike contact seals, they do not operate with a continuously loaded sealing lip rubbing against the inner ring.
Their principal advantage is low additional friction.
ZZ does not indicate a watertight seal. The presence of metal shields alone does not make the bearing suitable for direct exposure to pressurized water.
C3 indicates radial internal clearance greater than the normal CN class.
Radial internal clearance is measured before mounting and may change due to:
Interference fitting of the inner ring onto the shaft.
Fitting conditions of the outer ring in the housing.
Temperature differences between the bearing rings.
Operating loads and conditions.
C3 clearance may be appropriate when mounting conditions or thermal effects are expected to reduce the operating clearance.
However, C3 is not automatically preferable to CN in every application.
The NTN-SNR product specification for the exact 608ZZC3 designation provides the following data:
|
Parameter |
Catalogue value |
|---|---|
|
Basic dynamic load rating (C) |
3.45 kN |
|
Basic static load rating (C0) |
1.37 kN |
|
Fatigue load limit (Cu) |
0.06 kN |
|
Thermal reference speed |
32,000 rpm |
|
Mechanical limiting speed |
46,000 rpm |
|
Weight |
0.011 kg |
|
Operating temperature range |
-20 to +120 °C |
|
Cage |
Pressed steel |
|
Minimum chamfer dimension (rs) |
0.3 mm |
|
Inner ring shoulder diameter (d1) |
11.2 mm |
|
Outer ring shoulder diameter (D1) |
19.1 mm |
|
Calculation factor (f0) |
12.4 |
Older catalogue materials may contain different dynamic load ratings or weight values. The figures above correspond to the NTN-SNR 608ZZC3 product specification used for this description.
The thermal reference speed and mechanical limiting speed must not be interpreted as permissible continuous operating speeds under all conditions. Final selection depends on loading, temperature, fits, lubrication and cooling conditions.
The inner ring has a nominal bore diameter of 8 mm and is designed for mounting on a shaft with an appropriate fit.
An interference fit can reduce the bearing's radial internal clearance, so the selection of C3 must be considered together with the shaft tolerance.
The outer ring has a nominal outside diameter of 22 mm and fits into the housing bore.
Its raceway works with the balls to transmit loads between the bearing rings.
The single-row deep groove design accommodates radial loads and limited axial loads in both directions.
The actual permissible axial load depends on radial loading, operating clearance, rotational speed and service conditions.
SNR 608ZZC3 uses a pressed steel cage that maintains appropriate spacing between the balls.
The cage prevents direct contact between adjacent balls and assists their guidance during rotation.
Two metal shields are positioned on opposite sides of the bearing.
Their purpose is to reduce contamination entering the bearing and help retain lubricant.
They do not provide the same level of protection against water and fine contaminants as appropriately selected contact seals.
The basic dynamic load rating is used to calculate the nominal fatigue life of a bearing.
It does not represent the maximum permissible load under every operating condition.
For a deep groove ball bearing, basic rating life can be calculated using:
Where:
L10 - basic rating life in millions of revolutions.
C - basic dynamic load rating.
P - equivalent dynamic bearing load.
When radial and axial loads act simultaneously, P must be calculated using the appropriate catalogue factors.
The basic static load rating is used to evaluate the risk of permanent deformation at the contact points between the balls and raceways.
It is particularly relevant under high loads when the bearing is stationary or rotating very slowly.
The initial increased C3 clearance may be partially reduced by:
Interference fitting of the inner ring onto the shaft.
Interference fitting of the outer ring into the housing.
Higher inner ring temperature relative to the outer ring.
Insufficient operating clearance may increase friction and operating temperature.
Excessive operating clearance may impair shaft guidance and increase noise or vibration.
C3 clearance should be selected according to the expected operating clearance, not rotational speed alone.
The following designation variations may appear in catalogues and product searches:
SNR 608ZZC3
608ZZC3 SNR
608 ZZ C3 SNR
SNR 608 ZZ C3
608-ZZ-C3 SNR
608 ZZ/C3
SNR 608ZZC3 8x22x7
The official NTN-SNR catalogue designation is 608ZZC3.
Variations containing additional spaces or separators should be treated as alternative search references, not separate manufacturer designations.
|
SNR variant |
Shields or seals |
Radial clearance |
Main difference |
|---|---|---|---|
|
608 |
None |
CN |
Open construction |
|
608ZZ |
Two metal shields |
CN |
Non-contact protection, normal clearance |
|
608ZZC3 |
Two metal shields |
C3 |
Non-contact protection, increased clearance |
|
608EE |
Two contact seals |
CN |
Improved protection against contamination |
|
608EEC3 |
Two contact seals |
C3 |
Contact seals and increased clearance |
All listed variants have nominal dimensions of 8x22x7 mm but differ in construction and operating characteristics.
Both variants have two metal shields.
The difference is their radial internal clearance:
608ZZ - normal CN clearance.
608ZZC3 - increased C3 clearance.
They should not be interchanged without considering mounting fits and operating temperature.
Both variants have C3 clearance but use different methods of protecting the bearing interior.
608ZZC3 uses non-contact metal shields.
608EEC3 uses contact seals, which provide more effective protection against contaminants but generate additional friction.
According to SNR catalogue data, the mechanical limiting speed of 608ZZC3 is 46,000 rpm, compared with 26,000 rpm for 608EEC3.
This difference demonstrates why the sealing arrangement matters when selecting bearings for high-speed mechanisms.
The manufacturer specifies the following recommended dimensions for mating components:
|
Parameter |
Value |
|---|---|
|
Minimum shaft shoulder diameter (da) |
10 mm |
|
Maximum shaft shoulder diameter (da) |
11.2 mm |
|
Maximum housing shoulder diameter (Da) |
20 mm |
|
Maximum shaft and housing fillet radius (ra) |
0.3 mm |
The shoulders must provide appropriate support for the bearing rings without interfering with their chamfers.
In particular, the shaft or housing fillet radius must not exceed the permitted value at the corresponding support surface.
Before purchasing the bearing, verify:
Complete designation SNR 608ZZC3.
Bore diameter of 8 mm.
Outside diameter of 22 mm.
Width of 7 mm.
Two metal shields, ZZ.
Increased C3 radial internal clearance.
Basic dynamic and static load ratings.
Operating speed.
Shaft and housing fits.
Operating temperature.
Dust and moisture exposure.
Required protection against contamination.
Lubrication type and service life.
A bearing from another manufacturer with dimensions of 8x22x7 mm is not automatically a fully interchangeable replacement.
The shield design, clearance, load ratings, speed capability and operating requirements must also be compared.
Deep groove ball bearings in the 608 series are used in compact rotating mechanisms where small installation dimensions are important.
Typical applications of this bearing design include:
Small electric motors.
Fans and compact drive assemblies.
Guide rollers.
Conveyor mechanisms.
Workshop equipment.
Compact mechanical assemblies.
The 608ZZC3 variant may be appropriate where mounting fits or operating temperatures justify increased internal clearance and metal shields provide sufficient protection.
These applications are characteristic of the 608 bearing family and do not constitute a confirmed list of equipment using the exact SNR 608ZZC3 part number.
Before installation, check the cleanliness of the shaft, housing and supporting surfaces.
Contamination and burrs can damage the bearing rings or prevent proper seating.
When pressing the bearing onto a shaft, apply mounting force to the inner ring.
When pressing the bearing into a housing, apply force to the outer ring.
Mounting force must not be transmitted through the balls.
Do not deform or pry off the metal shields during normal installation.
A damaged shield may cause rubbing, increased rotational resistance and reduced protection of the bearing interior.
ZZ-shielded bearings are designed to operate with lubricant retained inside the bearing.
The shields should not be removed and the grease should not be washed out without an appropriate maintenance procedure.
The exact factory grease specification requires confirmation from the manufacturer.
Store the bearing in its original packaging in a clean, dry environment.
Avoid unnecessarily opening the packaging or exposing the product to moisture before installation.
The bearing has an inside diameter of 8 mm, an outside diameter of 22 mm and a width of 7 mm.
ZZ indicates two metal shields, one on each side of the bearing. These are non-contact shields designed to reduce contamination entering the bearing.
C3 indicates radial internal clearance greater than the normal CN class. It is used when mounting and thermal conditions require increased initial clearance.
The NTN-SNR product specification lists a basic dynamic load rating C of 3.45 kN and a basic static load rating C0 of 1.37 kN.
Yes. The manufacturer specifies a pressed steel cage.
Not automatically. Both have C3 clearance, but the first uses metal shields and the second uses contact seals. Their contamination protection and friction characteristics differ.
The manufacturer specifies a thermal reference speed of 32,000 rpm and a mechanical limiting speed of 46,000 rpm. The actual permissible operating speed depends on service conditions.
Not without checking the required operating clearance. The 608ZZ variant has normal CN clearance, while 608ZZC3 has increased C3 clearance.
SNR 608ZZC3 is a single-row deep groove ball bearing measuring 8x22x7 mm, featuring two metal shields (ZZ) and increased C3 radial internal clearance. It has a pressed steel cage, a basic dynamic load rating of 3.45 kN and a static load rating of 1.37 kN. It accommodates radial and bidirectional axial loads and belongs to NTN's SNR bearing range.
The specialist B2B industrial trading platform simmering.pl supplies SNR bearings for industrial, maintenance and technical applications. Product selection is supported by complete catalogue designations, dimensions and technical specifications, with worldwide shipping from stock in Poland.
Data sheet