SNR 608ZZ 8x22x7 mm single-row deep groove ball bearing from the French SNR brand, NTN Group. Two non-contact metal shields (ZZ), normal CN radial internal clearance and pressed steel cage. Basic dynamic load rating 3.45 kN, static load rating 1.37 kN. Thermal reference speed 32,000 rpm and mechanical limiting speed 46,000 rpm. Specialist B2B industrial trading platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Brand |
SNR |
|
Manufacturer group |
NTN |
|
Brand origin |
France |
|
Catalogue designation |
608ZZ |
|
Commercial designation |
608 ZZ SNR |
|
Bearing type |
Deep groove ball bearing |
|
Construction |
Single-row |
|
Series |
608 |
|
Inside diameter (d) |
8 mm |
|
Outside diameter (D) |
22 mm |
|
Width (B) |
7 mm |
|
Rolling elements |
Balls |
|
Shields |
Two metal shields, ZZ |
|
Shield design |
Non-contact |
|
Radial internal clearance |
Normal, CN |
|
Construction |
Non-separable |
|
Radial load capacity |
Yes |
|
Axial load capacity |
Both directions |
|
Nominal dimensions |
8x22x7 mm |
The designation 608ZZ identifies a bearing with metal shields on both sides and no additional suffix indicating increased internal clearance.
|
Designation element |
Technical meaning |
|---|---|
|
6 |
Deep groove ball bearing |
|
608 |
Bearing series with an 8 mm bore |
|
ZZ |
Two metal dust shields |
|
No C3 suffix |
Normal radial internal clearance, CN |
|
SNR |
French bearing brand of the NTN Group |
The 608 series belongs to the miniature deep groove ball bearing family.
Its nominal dimensions are:
d = 8 mm.
D = 22 mm.
B = 7 mm.
For the 608 designation, the bore diameter is 8 mm. The standard rule of multiplying the last two digits of a bearing designation by five, which applies to many larger bearings, does not apply here.
The ZZ suffix indicates two metal shields, one on each side of the bearing.
Their purpose is to reduce contamination entering the rolling contact area and help retain grease inside the bearing.
The shields are non-contact, so they do not generate the continuous rubbing friction associated with contact seals.
However, metal ZZ shields do not provide complete protection against water, fine dust or pressurized liquids.
The 608ZZ designation does not contain the C3 suffix.
The standard execution corresponds to normal radial internal clearance, CN.
Radial clearance is specified before installation. Its operating value may change due to bearing ring fits, temperature differences and loading.
A bearing with normal CN clearance should not automatically be replaced with a C3 version, even when both bearings have identical dimensions.
Technical data for the exact SNR 608ZZ designation, according to the NTN-SNR manufacturer's catalogue:
|
Parameter |
Catalogue value |
|---|---|
|
Basic dynamic load rating (C) |
3.45 kN |
|
Basic static load rating (C0) |
1.37 kN |
|
Fatigue load limit (Cu) |
0.06 kN |
|
Thermal reference speed |
32,000 rpm |
|
Mechanical limiting speed |
46,000 rpm |
|
Weight |
0.012 kg |
|
Operating temperature range |
-20 to +120 °C |
|
Cage |
Pressed steel |
|
Radial internal clearance |
CN |
|
Diameter d1 |
11.2 mm |
|
Diameter D1 |
19.1 mm |
|
Minimum chamfer dimension (rs) |
0.3 mm |
|
Calculation factor (f0) |
12.4 |
An older SNR catalogue lists a basic dynamic load rating of 3.15 kN. The newer product specification used for this description lists 3.45 kN. Values from different catalogue editions should not be mixed.
The inner ring has an 8 mm bore and is mounted on the shaft, while the outer ring has a diameter of 22 mm and fits into the housing.
The balls roll along the raceways of both rings, transmitting loads during rotation.
The SNR 608ZZ bearing is equipped with a pressed steel cage.
The cage maintains appropriate spacing between the balls and reduces direct contact between adjacent rolling elements.
The ZZ shields help retain lubricant and reduce the entry of larger contaminants.
Their non-contact construction minimizes additional friction compared with contact sealing arrangements.
The basic dynamic load rating is used to calculate the nominal fatigue life of the bearing.
For ball bearings, the basic rating life equation is:
Where:
L10 - basic rating life in millions of revolutions.
C - basic dynamic load rating.
P - equivalent dynamic bearing load.
The C value does not represent a universally permissible maximum operating load.
The basic static load rating is relevant when assessing loads acting on a stationary bearing or a bearing rotating very slowly.
It helps evaluate the risk of permanent deformation at the contact points between the balls and raceways.
The manufacturer specifies:
Thermal reference speed: 32,000 rpm.
Mechanical limiting speed: 46,000 rpm.
The thermal reference speed relates to the thermal conditions defined in the manufacturer's calculation method.
The mechanical limiting speed considers the bearing's mechanical design limitations.
Neither value automatically represents the permissible continuous operating speed in every application.
SNR 608ZZ
608ZZ SNR
608 ZZ SNR
SNR 608 ZZ
608-ZZ SNR
608ZZ 8x22x7
SNR 608ZZ deep groove ball bearing
The manufacturer's official catalogue designation is 608ZZ.
The remaining forms are natural commercial designation variations and do not represent separate OEM reference numbers.
|
Variant |
Protection |
Clearance |
Main difference |
|---|---|---|---|
|
SNR 608 |
No shields |
CN |
Open construction |
|
SNR 608ZZ |
Two metal shields |
CN |
Non-contact protection |
|
SNR 608ZZC3 |
Two metal shields |
C3 |
Increased radial internal clearance |
|
SNR 608EE |
Two contact seals |
CN |
Improved contamination protection |
|
SNR 608EEC3 |
Two contact seals |
C3 |
Contact seals and increased clearance |
All listed versions have nominal dimensions of 8x22x7 mm but differ in construction and operating characteristics.
Both variants have two metal shields and identical dimensions.
The difference is radial internal clearance:
608ZZ - normal CN clearance.
608ZZC3 - increased C3 clearance.
The C3 execution may be appropriate where fits or thermal conditions cause a greater reduction in operating clearance.
However, the CN version should not automatically be replaced with C3.
The 608ZZ bearing uses two non-contact metal shields.
The 608EE bearing is equipped with two contact seals, providing more effective protection against contamination.
According to manufacturer data, the mechanical limiting speeds are:
608ZZ - 46,000 rpm.
608EE - 26,000 rpm.
The difference is partly related to the sealing arrangement and its associated frictional resistance.
|
Parameter |
Value |
|---|---|
|
Minimum shaft shoulder diameter (da) |
10 mm |
|
Maximum shaft shoulder diameter (da) |
11.2 mm |
|
Maximum housing shoulder diameter (Da) |
20 mm |
|
Maximum fillet radius (ra) |
0.3 mm |
The shaft and housing shoulders must provide appropriate support for the bearing rings without interfering with their chamfers.
The shaft or housing fillet radius must not exceed the permissible value at the corresponding support surface.
Before purchasing, verify:
Complete designation SNR 608ZZ.
Dimensions of 8x22x7 mm.
Two metal shields, ZZ.
Normal CN radial internal clearance.
Required shaft and housing fits.
Radial and axial loads.
Rotational speed.
Operating temperature.
Lubrication conditions.
Dust and moisture exposure.
Noise and vibration requirements.
Matching dimensions do not automatically guarantee complete interchangeability.
Bearings with contact seals or increased C3 clearance may behave differently in the same mechanism.
Deep groove ball bearings in the 608 series are used in small rotating assemblies requiring compact installation dimensions.
Typical applications of this bearing design include:
Small electric motors.
Fans.
Guide rollers.
Conveyor mechanisms.
Small drive assemblies.
Workshop equipment.
The ZZ execution is suitable where low additional friction is important and metal shields provide sufficient protection against contamination.
These are typical applications of the 608ZZ design, not confirmed OEM applications in specific equipment models.
Before installation, clean the shaft, housing bore and supporting surfaces.
Burrs and contamination may prevent proper bearing seating.
When pressing the bearing onto a shaft, mounting force must be applied directly to the inner ring.
Force must not be transmitted through the balls.
When pressing the outer ring into a housing, apply force to that ring.
If both rings are installed with interference fits simultaneously, an appropriate mounting tool must be used.
Do not deform or pry off the metal shields during installation.
A damaged shield may rub against the bearing ring and increase rotational resistance.
Bearings with metal shields on both sides are generally supplied with grease.
The shields should not be removed and the lubricant should not be washed out without an appropriate maintenance procedure.
The exact factory grease specification should be confirmed for the particular bearing execution.
Store the bearing in a clean, dry environment, preferably in its original packaging until installation.
The bearing has an inside diameter of 8 mm, an outside diameter of 22 mm and a width of 7 mm.
ZZ indicates two metal dust shields, one on each side of the bearing. These are non-contact shields.
The standard 608ZZ variant has normal CN radial internal clearance. Increased C3 clearance is available in the separate 608ZZC3 execution.
The manufacturer's product data lists a basic dynamic load rating C of 3.45 kN and a basic static load rating C0 of 1.37 kN.
The thermal reference speed is 32,000 rpm, while the mechanical limiting speed is 46,000 rpm. The actual permissible speed depends on operating conditions.
Not automatically. They have identical dimensions and shields but differ in radial internal clearance, CN versus C3.
Yes. The manufacturer specifies a pressed steel cage.
No. Metal shields reduce contamination entering the bearing but do not provide complete protection against water or pressurized liquids.
SNR 608ZZ is a single-row deep groove ball bearing from SNR, a French brand belonging to the NTN Group. It measures 8x22x7 mm and features two metal shields (ZZ), a pressed steel cage and normal CN radial internal clearance. Its basic dynamic load rating is 3.45 kN and static load rating is 1.37 kN. The bearing accommodates radial and bidirectional axial loads.
The specialist B2B industrial trading platform simmering.pl supplies SNR bearings for industrial, maintenance and technical applications. Product selection is based on complete catalogue designations, dimensions and technical specifications, with worldwide shipping from stock in Poland.