CX 6201 2RS C3 12x32x10 mm is a single-row deep groove ball bearing with rubber seals on both sides and greater-than-normal C3 radial internal clearance. Its construction accommodates radial loads and axial loads in both directions. The seals restrict contaminant ingress and help retain grease. C3 clearance must be considered when selecting mounting fits and operating conditions. Specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Brand |
CX |
|
Complete designation |
6201 2RS C3 CX |
|
Bearing type |
Deep groove ball bearing |
|
Construction |
Single row |
|
Dimensional series |
62 |
|
Bore diameter d |
12 mm |
|
Outside diameter D |
32 mm |
|
Width B |
10 mm |
|
Dimensions |
12x32x10 mm |
|
Bore type |
Cylindrical |
|
Rolling elements |
Balls |
|
Number of rows |
1 |
|
Sealing arrangement |
2RS - rubber seals on both sides |
|
Radial internal clearance |
C3 - greater than normal |
|
Construction |
Non-separable |
|
Load directions |
Radial and bidirectional axial loads |
|
Self-aligning capability |
No |
The basic dynamic load rating C, basic static load rating C0, limiting speed, mass, cage material and grease specification require confirmation for the exact CX 6201 2RS C3 execution.
Technical values from other manufacturers should not be assigned to this product.
The first digit, 6, identifies a deep groove ball bearing.
Its construction consists of an inner ring, an outer ring, a single row of balls and a cage that maintains the appropriate spacing between the rolling elements.
The deep raceways enable the bearing to accommodate radial loads and axial loads acting in both directions.
Series 62 defines the dimensional proportions of the bearing.
For a 12 mm bore diameter, the following standard sizes are available:
|
Designation |
Dimensions |
|---|---|
|
6001 |
12x28x8 mm |
|
6201 |
12x32x10 mm |
|
6301 |
12x37x12 mm |
These bearings have the same bore diameter but differ in outside diameter, width and internal construction.
They are not directly interchangeable in terms of mounting dimensions.
The bore code 01 identifies a nominal bore diameter of 12 mm.
Standard bearing bore codes include:
|
Code |
Bore diameter |
|---|---|
|
00 |
10 mm |
|
01 |
12 mm |
|
02 |
15 mm |
|
03 |
17 mm |
The 2RS suffix indicates two rubber seals positioned on opposite sides of the bearing.
Their functions include:
Restricting dust and contaminant ingress.
Retaining grease within the rolling contact area.
Protecting the balls and raceways.
Reducing routine lubrication maintenance requirements.
The seals do not provide complete protection against immersion or pressurized liquids.
The C3 suffix indicates radial internal clearance greater than normal CN clearance.
Radial internal clearance is the total possible relative radial displacement between the bearing rings before installation, measured under specified conditions.
For a deep groove ball bearing with a 12 mm bore, the standard C3 clearance range according to ISO 5753-1 is 11-25 µm.
For comparison:
|
Clearance class |
Range for d = 12 mm |
|---|---|
|
CN |
3-18 µm |
|
C3 |
11-25 µm |
These ranges partially overlap. CN and C3 are clearance classes defining permissible ranges rather than single fixed clearance values.
After installation, operating clearance may decrease because of interference fits and temperature differences.
C3 does not indicate increased load capacity or a higher precision class. It identifies the bearing's internal clearance class.
CX identifies the product brand.
It does not specify bearing construction, precision class or cage type.
The inner ring has a cylindrical bore with a diameter of 12 mm.
Its raceway operates in contact with the balls, transferring loads from the shaft to the rolling elements.
The outer ring has an outside diameter of 32 mm, while the overall bearing width is 10 mm.
It fits into the bearing housing and transfers loads to the supporting structure.
A single row of balls is positioned between the inner and outer rings.
The cage maintains the appropriate spacing between the rolling elements and guides them during operation.
The cage material for the exact CX 6201 2RS C3 execution should be confirmed in the manufacturer's technical specifications.
Rubber seals on both sides restrict environmental exposure of the rolling contact area.
In contact-sealed executions, the sealing lip operates against a mating ring surface, generating additional frictional torque.
This must be considered when determining permissible rotational speed and operating temperature.
The CX 6201 2RS C3 bearing is primarily designed to accommodate radial loads.
Its deep raceways transfer loads between the shaft and housing through the balls.
The basic dynamic load rating C specified for the exact CX execution should be used when calculating bearing life.
The deep groove ball bearing construction enables axial loads to be accommodated in both directions.
The permissible axial load depends on radial loading, operating clearance, rotational speed and lubrication conditions.
Permissible rotational speed depends on:
Seal construction.
Grease specification.
Applied load.
Operating temperature.
Bearing ring fits.
Heat dissipation conditions.
The C3 suffix does not automatically indicate a higher permissible rotational speed.
|
Designation |
Dimensions |
Technical difference |
|---|---|---|
|
CX 6201 2RS C3 |
12x32x10 mm |
Rubber seals, C3 clearance |
|
CX 6201 2RS |
12x32x10 mm |
Rubber seals, without C3 designation |
|
CX 6201 ZZ |
12x32x10 mm |
Metal shields on both sides |
|
6201 2RS C3 from other brands |
12x32x10 mm |
Same basic configuration; technical parameters require comparison |
|
6001 2RS C3 |
12x28x8 mm |
Smaller outside diameter and width |
|
6301 2RS C3 |
12x37x12 mm |
Larger outside diameter and width |
The primary difference is the radial internal clearance class.
The C3 version has greater internal clearance than the normal-clearance execution.
This difference is relevant when tight mounting fits or temperature differences between the bearing rings are present.
The 2RS version uses rubber seals, while ZZ indicates metal shields on both sides.
Metal shields generally generate lower frictional resistance but provide a different level of contamination protection.
A 2RS execution should not automatically be replaced with a ZZ version.
Both designations refer to single-row deep groove ball bearings measuring 12x32x10 mm, with seals on both sides and C3 radial internal clearance.
However, this does not guarantee complete equivalence of all technical parameters.
Before substitution, load ratings, sealing construction, limiting speed and application-specific requirements must be compared.
Natural written variations include:
6201 2RS C3 CX
CX 6201 2RS C3
6201-2RS-C3 CX
CX 6201-2RS-C3
6201 2RS/C3 CX
6201 2RS C3 12x32x10
CX 6201 2RS C3 Deep Groove Ball Bearing
These are alternative search and written formats. Not all are necessarily official manufacturer catalog designations.
Before purchasing, verify:
Complete designation 6201 2RS C3 CX.
Dimensions of 12x32x10 mm.
Rubber seals on both sides.
Required C3 clearance class.
Basic dynamic and static load ratings.
Permissible rotational speed.
Operating temperature.
Lubrication conditions.
Shaft and housing fits.
Application-specific requirements.
The C3 suffix is particularly important.
If the equipment manufacturer specifies a C3 bearing, it should not be replaced with a CN execution without checking the operating clearance after installation.
Similarly, installing a C3 bearing instead of CN may be unsuitable for assemblies requiring minimal operating clearance and precise shaft guidance.
Deep groove ball bearings of the 6201 series with rubber seals and C3 clearance may be considered for rotating assemblies requiring support for a 12 mm shaft.
Typical application categories include:
Electric motors.
Fans and blowers.
Drive assemblies.
Conveyor rollers and transport mechanisms.
Workshop equipment.
Industrial production machinery.
Rotating shaft supports.
The selection of C3 clearance should be based on mounting fits, temperature conditions and the required operating clearance.
These examples relate to the general 6201 2RS C3 bearing category and do not represent confirmed OEM applications for the exact CX product.
Before installation, clean the shaft and housing bore and verify their dimensions and tolerances.
When installing the bearing onto a shaft, apply mounting force to the inner ring.
When pressing the bearing into a housing, apply force to the outer ring.
Mounting force must not be transmitted through the balls.
Greater initial clearance may be reduced by interference fits and temperature differences between the bearing rings.
Operating clearance should be evaluated under actual operating conditions.
The seals should not be damaged or removed during standard installation.
Store the bearing in its original packaging in a clean, dry environment.
The bearing has a 12 mm bore diameter, 32 mm outside diameter and 10 mm width.
It indicates rubber seals on both sides, which restrict contaminant ingress and help retain grease.
C3 indicates greater-than-normal radial internal clearance. It does not indicate increased load capacity or a higher precision class.
For a deep groove ball bearing with a 12 mm bore, the standard C3 clearance range is 11-25 µm before installation.
Not automatically. A version without C3 may have normal CN radial internal clearance, so mounting fits and temperature requirements must be checked.
Double-sealed deep groove ball bearings are generally supplied with factory-applied grease. The exact grease specification for this CX execution requires confirmation.
Not directly. C3 identifies internal clearance, while permissible speed also depends on seals, lubrication, load and temperature.
It may be considered a dimensional and constructional alternative, but complete interchangeability requires comparing the technical specifications of both manufacturers.
CX 6201 2RS C3 is a single-row deep groove ball bearing measuring 12x32x10 mm. Rubber seals on both sides restrict contaminant ingress and help retain grease. The C3 suffix indicates greater-than-normal radial internal clearance, which must be considered when selecting mounting fits and operating temperatures. The bearing accommodates radial loads and axial loads in both directions.
The product is offered through the specialist B2B industrial supply platform simmering.pl, serving industrial procurement departments, technical distributors and maintenance teams, with worldwide shipping from stock in Poland.
Data sheet