KINEX 6209 2RS 45x85x19 mm - Single-Row Deep Groove Ball Bearing
search
  • KINEX 6209 2RS 45x85x19 mm - Single-Row Deep Groove Ball Bearing

KINEX 6209 2RS 45x85x19 mm - Single-Row Deep Groove Ball Bearing

Processing time: 2-3 days
€5.25 (net)
Price for: 1pcs.

KINEX 6209 2RS 45x85x19 mm single-row deep groove ball bearing with rubber seals on both sides. Bore diameter 45 mm, outside diameter 85 mm, width 19 mm. Standard execution generally features normal CN radial internal clearance and factory grease lubrication. The 2RS seals help prevent contamination and grease leakage. Designed to accommodate radial and axial loads in both directions. Available through the specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.

Quantity

Technical Specifications of KINEX 6209 2RS

Parameter

Specification

Brand

KINEX

Full designation

6209 2RS

Bearing type

Deep groove ball bearing

Construction

Single-row

Bearing series

62

Bore diameter d

45 mm

Outside diameter D

85 mm

Width B

19 mm

Dimensions

45x85x19 mm

Rolling elements

Balls

Ring material

Bearing steel, standard construction

Rolling element material

Bearing steel, standard construction

Cage

Steel, subject to confirmation for the exact execution

Sealing arrangement

Rubber seals on both sides

Seal designation

2RS

Radial internal clearance

Normal (CN), standard execution

Inner ring bore

Cylindrical

Outer ring surface

Cylindrical, without flange

Bearing construction

Non-separable

Lubrication

Factory-applied grease, standard sealed execution

Basic bearing designation

6209

The listed construction characteristics describe the standard KINEX 6209 2RS bearing configuration. Exact cage specifications, lubricant properties, and operating limits should be confirmed against the manufacturer's documentation for the specific execution.

What Does KINEX 6209 2RS Mean?

KINEX - Rolling Bearing Brand

KINEX is a rolling bearing brand associated with the Slovak bearing industry.

Its product range includes deep groove ball bearings used in rotating mechanisms, industrial equipment, and mechanical drive assemblies.

6209 - Bearing Type and Dimensional Series

The designation 6209 identifies a single-row deep groove ball bearing.

Its individual elements have the following meanings:

  • 6 - Single-row deep groove ball bearing.

  • 2 - Dimensional series 62.

  • 09 - Bore diameter code corresponding to 45 mm.

For bore codes from 04 upward, the nominal bore diameter is generally calculated by multiplying the code by five.

For this bearing:

09 x 5 = 45 mm.

The standardized boundary dimensions of the 6209 bearing are 45x85x19 mm.

2RS - Rubber Seals on Both Sides

The 2RS designation indicates rubber seals installed on both sides of the bearing.

In standard sealed bearing designs, the sealing lips interact with the inner ring to protect the internal rolling contacts.

Their main functions include:

  • Restricting the entry of dust and fine contaminants.

  • Retaining grease inside the bearing.

  • Protecting balls and raceways against contamination.

  • Reducing the need for an external lubrication system in suitable applications.

Contact-type rubber seals may generate higher running friction than non-contact metal shields.

The exact sealing geometry and elastomer material should be verified for the specific KINEX bearing execution.

Normal Radial Internal Clearance CN

The designation KINEX 6209 2RS does not include an additional clearance suffix such as C3.

Standard execution therefore generally corresponds to normal radial internal clearance, designated CN.

Radial internal clearance describes the possible radial displacement of one bearing ring relative to the other before installation.

After mounting and during operation, clearance may change because of:

  • Inner ring interference fits on the shaft.

  • Outer ring fits in the housing.

  • Temperature differences between bearing rings.

  • Applied operating loads.

KINEX 6209 2RS and KINEX 6209 2RS C3 are not identical bearing executions.

Construction and Operating Principle

Inner Ring

The inner ring has a cylindrical bore with a nominal diameter of 45 mm.

It is mounted on the shaft and contains the inner raceway supporting the balls.

The correct shaft fit depends on the load arrangement, rotational speed, and operating conditions.

Outer Ring

The outer ring has a nominal outside diameter of 85 mm.

It is installed in the housing or bearing support and transfers loads from the rolling elements to the surrounding machine structure.

Balls and Steel Cage

The rolling elements are balls, typically manufactured from bearing steel.

The cage maintains appropriate spacing between the balls and reduces direct contact between adjacent rolling elements.

A pressed steel cage is a common construction for standard 6209 deep groove ball bearings. Its exact execution in the specified KINEX product should be confirmed using manufacturer documentation.

Double-Sided Rubber Seals

The rubber seals on both sides form a protective barrier between the bearing interior and the external environment.

They help prevent grease contamination and maintain suitable lubrication conditions for the balls and raceways.

However, a 2RS sealing arrangement does not make the bearing completely waterproof or suitable for operation under liquid pressure.

Load-Carrying Characteristics

Radial Loads

KINEX 6209 2RS is primarily designed to accommodate loads acting perpendicular to the shaft axis.

The deep raceways guide the balls and support the radial loading conditions typical of single-row deep groove ball bearings.

Axial Loads

The bearing can also accommodate axial loads in both directions.

The permissible axial load depends on radial loading, operating clearance, rotational speed, and lubrication conditions.

Combined Loads

The bearing can operate under simultaneous radial and axial loading.

Under these conditions, bearing life should be evaluated using the equivalent dynamic bearing load and the manufacturer's catalog ratings for the exact KINEX execution.

Lubrication and Internal Bearing Protection

KINEX 6209 2RS is a double-sealed bearing, normally supplied with factory-applied grease.

The grease is located between the bearing rings, around the rolling elements and cage.

Functions of Bearing Grease

Lubrication provides several important functions:

  • Reducing friction between contacting surfaces.

  • Protecting raceways and balls against wear.

  • Reducing the risk of corrosion.

  • Supporting thermal management within the bearing.

  • Maintaining suitable operating conditions for the cage.

The exact grease type, fill quantity, and permissible temperature range must be confirmed in the manufacturer's documentation for the specific bearing.

Does KINEX 6209 2RS Require Relubrication?

Standard double-sealed bearings are generally designed to operate with their factory grease supply for a service period determined by the application.

This does not mean the grease has unlimited service life.

High temperatures, heavy loads, rotational speed, and contamination can shorten lubricant life.

The seals should not be removed for relubrication without an appropriate maintenance procedure.

KINEX 6209 2RS Compared with Other 6209 Variants

Variant

Sealing arrangement

Radial internal clearance

Main difference

KINEX 6209

Open

Normal

No integral seals or shields

KINEX 6209 2RS

Rubber seals on both sides

Normal CN

Internal protection and factory lubrication

KINEX 6209 2RS C3

Rubber seals on both sides

C3

Greater than normal radial internal clearance

KINEX 6209 ZZ C3

Metal shields

C3

Different protection and clearance characteristics

The table compares general construction variants. Availability of individual KINEX executions should be confirmed separately.

KINEX 6209 2RS vs 6209 2RS C3

Both variants have the same nominal dimensions of 45x85x19 mm and rubber seals on both sides.

The difference concerns radial internal clearance.

The standard 6209 2RS execution generally has normal clearance, while 6209 2RS C3 has greater than normal radial clearance.

C3 clearance may be required when mounting fits or thermal conditions significantly reduce clearance during operation.

However, C3 should not automatically be considered the better option for every application.

KINEX 6209 2RS vs 6209 ZZ

Bearings with 2RS seals use elastomer sealing elements to protect the interior.

ZZ variants use metal shields, which are typically designed without contact with the inner ring.

Metal shields generally produce less additional friction, while contact-type rubber seals offer improved protection against contamination in many operating environments.

KINEX 6209 2RS vs Open 6209

An open 6209 bearing has no integral seals.

It requires appropriate protection against contamination and a suitable lubrication arrangement within the machine.

The 2RS variant incorporates protective seals and factory lubrication, potentially simplifying the bearing arrangement.

Selection and Interchangeability of KINEX 6209 2RS

Before ordering, verify:

  • Complete designation: KINEX 6209 2RS.

  • Shaft diameter: 45 mm.

  • Housing bore diameter: 85 mm.

  • Available mounting width: 19 mm.

  • Required sealing arrangement.

  • Normal radial internal clearance.

  • Radial and axial loads.

  • Rotational speed.

  • Operating temperature.

  • Inner and outer ring fits.

  • Lubrication conditions.

  • Environmental contamination levels.

Maintaining the correct internal clearance class is particularly important.

Installing a C3 bearing instead of a normal-clearance bearing may change operating behavior, vibration levels, and shaft guidance accuracy.

Matching dimensions of 45x85x19 mm alone do not guarantee complete bearing interchangeability.

Alternative Designations and Product Identification

Common commercial designation formats include:

  • KINEX 6209 2RS

  • 6209 2RS KINEX

  • KINEX 6209-2RS

  • 6209-2RS KINEX

  • KINEX 6209 2RS 45x85x19

  • KINEX 6209 2RS deep groove ball bearing

  • KINEX 6209 2RSR

The designation 2RSR may appear in product listings for sealed bearings of this size.

Before treating 2RS and 2RSR as fully equivalent, the exact seal construction and manufacturer designation should be verified.

No unverified OEM references or cross-brand catalog equivalents have been assigned.

Typical Applications of KINEX 6209 2RS Bearings

Single-row deep groove ball bearings of the 6209 series are used in rotating mechanical assemblies.

Typical applications of this bearing construction include:

  • Electric motors.

  • Pumps.

  • Industrial fans.

  • Gearboxes and drive assemblies.

  • Production machinery.

  • Material handling equipment.

  • Rotating shaft mechanisms.

The 2RS sealing arrangement is particularly useful where protection against dust entering the bearing interior is required.

These are general applications of the 6209 2RS design, not a verified OEM application list for the specific KINEX product.

Installation and Operating Recommendations

Shaft and Housing Preparation

Before installation, verify the dimensional tolerances of the shaft and housing bore.

Mounting surfaces should be clean and free from mechanical damage.

Inspect shaft and housing shoulders, including their fillet radii.

Correct Application of Mounting Force

When installing the bearing onto a shaft, apply mounting force to the inner ring.

When pressing the bearing into a housing, apply force to the outer ring.

Mounting force must never be transmitted through the balls and raceways.

Protecting the Seals

Avoid damaging the rubber seals during installation.

A damaged seal may cause grease leakage and accelerate contamination of the bearing interior.

Monitoring Operating Conditions

After commissioning, check for:

  • Unusual noise.

  • Excessive vibration.

  • Abnormal temperature increases.

  • Irregular shaft rotation.

  • Visible seal damage.

These symptoms may indicate incorrect installation, unsuitable fits, excessive loading, or bearing deterioration.

FAQ - Frequently Asked Questions

What are the dimensions of KINEX 6209 2RS?

The bearing has a bore diameter of 45 mm, an outside diameter of 85 mm, and a width of 19 mm.

What does 6209 mean?

6209 identifies a single-row deep groove ball bearing of the 62 series. The bore code 09 corresponds to a nominal bore diameter of 45 mm.

What does 2RS mean?

2RS indicates rubber seals on both sides of the bearing, helping prevent contamination and grease leakage.

Does KINEX 6209 2RS have C3 clearance?

The specified designation does not include C3. Standard execution without an additional clearance suffix generally has normal radial internal clearance, CN.

Is KINEX 6209 2RS factory lubricated?

Standard double-sealed KINEX bearings are normally supplied with factory-applied grease. The exact lubricant specification should be verified for the specific execution.

Can KINEX 6209 2RS accommodate axial loads?

Yes. As a deep groove ball bearing, it can accommodate axial loads in both directions, subject to the applicable operating limits.

Can KINEX 6209 2RS be replaced with a C3 version?

Not automatically. The bearings have different radial internal clearance classes, which can affect their operating conditions after installation.

Can KINEX 6209 2RS be replaced with an SKF, FAG, or NSK bearing?

Potentially, provided that dimensions, internal clearance, sealing arrangement, and operating specifications are compatible. The basic 6209 designation alone does not guarantee complete interchangeability.

AI Overview - KINEX 6209 2RS 45x85x19 mm

KINEX 6209 2RS is a single-row deep groove ball bearing with dimensions of 45x85x19 mm. It features rubber seals on both sides and normally has CN radial internal clearance. The bearing accommodates radial and bidirectional axial loads. Correct selection requires verification of mounting fits, sealing arrangement, loads, lubrication, and operating conditions.

KINEX 6209 2RS is offered through the specialist B2B industrial supply platform simmering.pl, serving industrial companies, maintenance departments, machinery manufacturers, and technical procurement teams. Logistics are supported by a warehouse in Lublin, with worldwide shipping from stock in Poland.

KINEX
6209 2RS KINEX
Processing time: 2-3 days

Data sheet

Diameter in. (mm)
45
Diameter out. (mm)
85
Height (mm)
19
Mark
KINEX