• New
GATES C 2995 LP/2935 LI - Classical V-Belt C115 22x14 mm
search
  • GATES C 2995 LP/2935 LI - Classical V-Belt C115 22x14 mm

GATES C 2995 LP/2935 LI - Classical V-Belt C115 22x14 mm

Processing time: 2-3 days
€39.65 (net)
Price for: 1pcs.

GATES C 2995 LP/2935 LI is a classical HI-POWER V-belt with a C profile and nominal cross-section of 22x14 mm. Pitch length LP 2995 mm and inside length LI 2935 mm. Corresponding GATES catalogue designation C115. Designed for industrial friction belt drives using compatible C-profile pulleys. Available through the specialized B2B trading platform simmering.pl, with stock in Lublin, Poland, and worldwide shipping.

Quantity

Technical Specifications of GATES C 2995 LP/2935 LI

Parameter Specification
Manufacturer GATES
Complete designation C 2995 LP/2935 LI
Catalogue designation C115
Product type Classical V-belt
Product family HI-POWER
Belt profile C
Nominal top width 22 mm
Nominal belt height 14 mm
Nominal cross-section 22x14 mm
Pitch length LP 2995 mm
Inside length LI 2935 mm
Construction Endless trapezoidal V-belt
Power transmission Friction drive
Compatible pulleys Pulleys with grooves suitable for the classical C profile

The specified lengths refer to different measurement references. They must not be treated as interchangeable values.

What Does GATES C 2995 LP/2935 LI Mean?

The designation identifies the manufacturer, belt profile and two reference lengths.

  • GATES - Manufacturer of power transmission components.

  • C - Classical V-belt profile with a nominal cross-section of 22x14 mm.

  • 2995 LP - Pitch length of 2995 mm.

  • 2935 LI - Inside length of 2935 mm.

  • C115 - Corresponding GATES catalogue designation within the HI-POWER range.

LP and LI describe different belt length measurement references.

The inside length LI must not be confused with the outside length LA.

For the correct selection of a replacement belt, lengths must always be compared using equivalent measurement standards.

Alternative Designations and Reference Numbers

The product may be identified using the following designations:

  • GATES C 2995 LP/2935 LI

  • C 2995 LP/2935 LI GATES

  • GATES C115

  • C115 GATES

  • GATES HI-POWER C115

  • C 2995 LP

  • C 2935 LI

  • GATES C115 22x14 mm

The GATES catalogue designation C115 identifies the corresponding classical V-belt size.

The manufacturer reference 9004-10115 and EAN 5412571052329 have also been associated with this GATES C115 product. These identifiers should be checked against the supplied belt and its packaging before being entered into the product database.

No unverified OEM references or cross-manufacturer replacement numbers have been assigned.

Construction and Operating Principle

The GATES C 2995 LP/2935 LI is a classical trapezoidal V-belt designed to transmit mechanical power between pulleys through friction.

Its trapezoidal cross-section enables the belt's sidewalls to engage with the matching grooves of the pulleys.

Torque is transmitted by friction between the belt sidewalls and the pulley groove surfaces.

The HI-POWER belt construction incorporates tensile reinforcement and an elastomeric body designed to withstand the mechanical stresses generated during power transmission.

The tensile members carry the belt's operating tension, while the surrounding belt structure provides the required geometry and flexibility.

The precise material composition and construction details should be verified against the manufacturer's documentation for the relevant HI-POWER execution.

The belt is designed to operate in pulleys with the appropriate classical C groove profile.

GATES C 2995 LP/2935 LI Compared with Other V-Belt Profiles

Classical V-belts are available in several standard cross-sectional profiles.

Belt profile Nominal cross-section Description
A 13x8 mm Smaller classical V-belt profile
B 17x11 mm Intermediate classical V-belt profile
C 22x14 mm Profile used by GATES C115
D 32x19 mm Larger classical V-belt profile

Belts with different profiles are not directly interchangeable, even when their nominal lengths are similar.

The C profile requires pulleys with matching groove geometry.

Classical C belts should not automatically be replaced with narrow-section V-belts such as SPB or SPC.

Differences in cross-sectional geometry affect pulley compatibility, power transmission capacity and operating conditions.

Belt Selection and Interchangeability

Before ordering GATES C 2995 LP/2935 LI, verify the following:

  • Complete manufacturer designation.

  • GATES catalogue designation C115.

  • Classical C profile.

  • Nominal cross-section of 22x14 mm.

  • Pitch length LP of 2995 mm.

  • Inside length LI of 2935 mm.

  • Pulley groove geometry.

  • Centre distance between pulleys.

  • Available belt tension adjustment.

  • Pulley rotational speed.

  • Required transmitted power.

  • Operating loads and duty cycle.

  • Ambient temperature and environmental conditions.

It is particularly important to compare belt lengths measured according to the same reference system.

A belt specified with an outside length of 2995 mm is not automatically interchangeable with a belt having a pitch length of 2995 mm.

For multiple-belt drives, the belts must also meet the manufacturer's requirements for matched operating lengths.

Matching the belt profile and nominal length alone does not guarantee complete interchangeability.

Typical Applications of Classical C Profile V-Belts

Classical C profile V-belts are used in industrial belt transmissions requiring a suitable cross-section and power transmission capacity.

Typical applications for this belt category include:

  • Industrial fan drives.

  • Compressor belt transmissions.

  • Pump drive systems.

  • Manufacturing and processing machinery.

  • Industrial equipment with multi-groove C-profile pulleys.

These are typical applications of classical C profile V-belts, not confirmed OEM applications of the exact GATES C115 designation in specific machines.

Selection for a particular drive system must be based on the pulley geometry, transmitted power, rotational speed and operating conditions.

Installation and Maintenance

Before installation, inspect the pulleys for wear, contamination and damage.

Check pulley alignment and ensure that the groove geometry is suitable for the classical C profile.

The belt should be installed after reducing the centre distance or releasing the tensioning mechanism.

Do not force the belt over pulley edges using sharp tools or excessive mechanical force.

After installation, adjust belt tension according to the recommendations of GATES and the equipment manufacturer.

Insufficient tension can cause slipping, heat generation and premature belt wear.

Excessive tension increases the radial loads acting on shafts and bearings and may reduce the service life of the drive components.

During operation, inspect the belt for sidewall wear, cracking, glazing and signs of slipping.

Store V-belts in a clean, dry location away from direct sunlight, excessive heat and substances that may damage elastomeric materials.

Frequently Asked Questions (FAQ)

What are the dimensions of GATES C 2995 LP/2935 LI?

The belt has a classical C profile with a nominal cross-section of 22x14 mm. Its pitch length is 2995 mm and its inside length is 2935 mm.

What does the C profile mean?

The C designation identifies a classical V-belt profile with a nominal top width of 22 mm and height of 14 mm. It must be used with pulleys designed for the corresponding groove profile.

What does LP 2995 mean?

LP 2995 identifies the belt's pitch length of 2995 mm. In the relevant GATES catalogue, this corresponds to the datum length reference Ld.

What does LI 2935 mean?

LI 2935 indicates an inside belt length of 2935 mm. It is not equivalent to the belt's outside length.

What is the GATES catalogue designation for this belt?

The corresponding GATES catalogue designation is C115, belonging to the HI-POWER classical V-belt family. The number 115 refers to the nominal inside length in inches.

Can GATES C115 be replaced with an SPC V-belt?

Not automatically. C and SPC are different belt profiles with different cross-sectional geometries. Replacement requires verification of pulley compatibility and drive operating conditions.

Can GATES C115 be used in multiple-belt drives?

Yes, provided the drive is designed for multiple classical C profile belts and the belts meet the manufacturer's requirements for matched operating lengths.

How should the GATES C115 V-belt be tensioned?

Belt tension must be adjusted according to GATES recommendations and the drive design. Insufficient tension can cause slipping, while excessive tension increases loads on shafts and bearings.

GATES C 2995 LP/2935 LI - Key Product Information

GATES C 2995 LP/2935 LI is a classical HI-POWER V-belt with a C profile and nominal cross-section of 22x14 mm. It has a pitch length of 2995 mm and an inside length of 2935 mm. Its corresponding GATES catalogue designation is C115. The belt is designed for friction-based power transmission using compatible C-profile pulleys.

GATES C 2995 LP/2935 LI is available through the specialized B2B trading platform simmering.pl, serving industrial customers from stock in Poland, with worldwide shipping.

GATES
C 2995 LP/2935 LI
Processing time: 2-3 days

Data sheet

Mark
GATES