- New
Bosch Rexroth R162171420 is a size 30 recirculating ball runner block designated KWD-030-SNH-C1-N-1. Slimline SNH design, 60 mm width, 97.7 mm length and 45 mm assembly height with rail. Features C1 moderate preload, normal accuracy class N and standard SS seals. Basic dynamic load rating C: 36.5 kN; static load rating C0: 48.1 kN. Relubricatable design for compatible Bosch Rexroth profiled guide rails. Available through the specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Manufacturer |
Bosch Rexroth |
|
Manufacturer part number |
R162171420 |
|
Technical designation |
KWD-030-SNH-C1-N-1 |
|
Product type |
Linear ball runner block |
|
Guide system |
Ball Rail Systems |
|
Nominal size |
30 |
|
Design |
SNH - Slimline, Normal Length, High |
|
Block length version |
Standard |
|
Runner block width (A) |
60 mm |
|
Runner block length (B) |
97.7 mm |
|
Assembly height with rail (H) |
45 mm |
|
Mounting hole spacing (E1) |
40 mm |
|
Mounting hole spacing (E2) |
40 mm |
|
Preload class |
C1 - Moderate preload |
|
Accuracy class |
N - Normal |
|
Sealing system |
SS - Standard seals |
|
Ball chain |
Without ball chain |
|
Material |
Steel |
|
Basic dynamic load rating (C) |
36,500 N |
|
Basic static load rating (C0) |
48,100 N |
|
Mass |
0.991 kg |
|
Lubrication |
Relubricatable |
|
Dimension |
Value |
|---|---|
|
A |
60 mm |
|
A2 |
28 mm |
|
B |
97.7 mm |
|
B1 |
67.4 mm |
|
H |
45 mm |
|
H1 |
38.35 mm |
|
H2 |
28.35 mm |
|
E1 |
40 mm |
|
E2 |
40 mm |
|
N6 |
17 mm |
|
S2 |
M8 |
|
S5 |
9 mm |
|
T |
80 mm |
The assembly height H of 45 mm refers to the runner block installed on the corresponding guide rail. It must not be interpreted as the independent height of the runner block body.
The manufacturer part number R162171420 identifies a specific Bosch Rexroth linear runner block configuration.
Its technical designation, KWD-030-SNH-C1-N-1, describes the principal design characteristics.
KWD - Recirculating ball runner block for a profiled linear guide system.
030 - Nominal size 30.
SNH - Slimline design, normal length and high-profile configuration.
C1 - Moderate preload.
N - Normal accuracy class.
1 - Design variant defined within the manufacturer's designation system.
The product belongs to the Bosch Rexroth Ball Rail Systems family.
It is not a conventional radial ball bearing for supporting a rotating shaft. It is a linear motion component designed to guide machine elements along a straight path.
The R162171420 runner block operates together with a compatible profiled guide rail.
Steel balls circulate between precisely manufactured raceways in the rail and runner block.
The rolling elements transmit loads while reducing friction during linear displacement.
Internal return channels allow the balls to recirculate continuously as the runner block travels along the rail.
This arrangement provides controlled linear movement while supporting loads and moments acting on the guided machine component.
The SNH configuration combines a narrow runner block body with a high-profile construction.
The 60 mm width helps limit the lateral installation space required by the guide assembly.
The 45 mm assembly height defines the mounting position of the supported machine component relative to the guide rail.
This geometry is relevant for machinery requiring rigid linear guidance within a relatively narrow mounting envelope.
The standard-length configuration provides a balance between compact installation dimensions and the load-carrying capability of the runner block.
The C1 preload class specifies moderate internal preload between the rolling elements and raceways.
Preload influences:
Linear guide rigidity.
Elastic displacement under load.
Resistance to tilting and moment loads.
Running friction.
Motion accuracy and repeatability.
Moderate preload reduces internal play and improves the stiffness of the guide arrangement compared with configurations having lower preload.
However, preload also influences friction and operating behavior.
The C1 designation must not be interpreted as an unrestricted increase in permissible load capacity.
The N designation identifies the normal accuracy class.
Accuracy class is relevant to the geometric tolerances of the guide assembly and the precision of linear movement.
For machinery requiring tighter positioning or geometric tolerances, the suitability of class N should be evaluated against the machine manufacturer's requirements.
The accuracy class must also be considered together with rail mounting accuracy, structural stiffness and alignment.
The runner block incorporates the standard SS sealing arrangement.
The seals help limit the ingress of contaminants into the ball circulation system and support lubricant retention around the rolling contacts.
In operating environments containing large quantities of dust, metal chips, wood particles or cutting fluids, additional protective measures may be required.
Standard seals should not be treated as providing complete protection against every form of industrial contamination.
Bosch Rexroth R162171420 is designed to accommodate forces and moments acting on a linear guide assembly.
|
Parameter |
Value |
|---|---|
|
Basic dynamic load rating (C) |
36.5 kN |
|
Basic static load rating (C0) |
48.1 kN |
|
Dynamic moment rating (Mt) |
630 Nm |
|
Static moment rating (Mt0) |
830 Nm |
|
Dynamic moment rating (ML) |
440 Nm |
|
Static moment rating (ML0) |
580 Nm |
The basic dynamic load rating C is used in calculations of nominal service life under repeated linear movement.
Actual service life depends on:
Applied load magnitude and direction.
Load distribution between runner blocks.
Travel distance and operating cycles.
Acceleration and deceleration.
Lubrication conditions.
Contamination and environmental influences.
Mounting accuracy and structural rigidity.
The catalogue load rating is a standardized calculation parameter, not a universally permissible continuous operating load.
The static load rating C0 is used to evaluate the risk of permanent deformation at the rolling element and raceway contacts.
Static safety is especially important in machinery exposed to high stationary loads, shock loads or significant moment loading.
The static load rating must be considered together with the actual equivalent static load and the required safety factor.
The Mt and ML parameters describe the runner block's resistance to moments acting around defined axes of the linear guide arrangement.
Moment loading occurs when an external force acts at a distance from the guide's load-bearing center.
For example, an offset machine component can generate a tilting moment even when the applied force itself is primarily vertical.
When several runner blocks support a common structure, the load distribution depends on block spacing, structural stiffness, mounting tolerances and the position of the applied forces.
The dynamic and static moment ratings must be evaluated separately according to the manufacturer's calculation procedure.
Bosch Rexroth R162171420 is designed for use with compatible size 30 profiled guide rails from the Bosch Rexroth Ball Rail Systems range.
Relevant guide rail families include:
R1605
R1607
Before combining the runner block with a rail, verify the complete rail designation, nominal size, raceway geometry and guide system compatibility.
Important: Nominal size 30 alone does not guarantee compatibility with every size 30 linear guide rail, particularly products from different manufacturers.
The original manufacturer part number is Bosch Rexroth R162171420.
Common identification formats include:
REXROTH R162171420
Bosch Rexroth R162171420
R1621 714 20
R1621-714-20
KWD-030-SNH-C1-N-1
R162171420 KWD-030-SNH-C1-N-1
These formats help identify the product in technical documentation, purchasing systems and spare parts catalogues.
The R162171420 designation is also associated in spare parts listings with selected HOMAG and WEEKE machinery.
Reported reference numbers include:
HOMAG 4-006-10-2276
HOMAG 4006102276
These references may be used when identifying linear guide components in selected HOMAG/WEEKE machining systems.
Compatibility with a specific machine must be confirmed using its original spare parts documentation.
The presence of a reference number in a spare parts listing does not establish universal interchangeability across all machine versions.
Bosch Rexroth R162171420 is intended for precise linear guidance in industrial machinery and mechanical equipment.
Typical applications for this type of recirculating ball runner block include:
CNC machine tools and machining centers.
Woodworking machinery.
Linear machine axes.
Industrial automation systems.
Positioning and handling mechanisms.
Precision motion assemblies.
Moving machine structures requiring rigid guidance.
The runner block may be used in machinery where controlled linear displacement, load capacity and resistance to moment loading are important design requirements.
The R162171420 part number is also associated with selected HOMAG/WEEKE machinery, including linear guidance arrangements for machine axes.
Suitability for a particular machine must be confirmed against the original equipment specification.
Before selecting Bosch Rexroth R162171420, verify the following characteristics:
Manufacturer part number: R162171420.
Technical designation: KWD-030-SNH-C1-N-1.
Nominal size: 30.
Runner block width: 60 mm.
Runner block length: 97.7 mm.
Assembly height: 45 mm with the corresponding rail.
Mounting hole spacing: E1 = 40 mm and E2 = 40 mm.
Preload class: C1.
Accuracy class: N.
Sealing arrangement: Standard SS.
Rail compatibility: Correct guide profile and raceway geometry.
Operating conditions: Forces, moments, travel speed, lubrication and environmental contamination.
Runner blocks with the same nominal size may differ in height, length, mounting dimensions, preload and accuracy.
A replacement should not be selected solely on the basis of similar appearance or runner block width.
Before installation, clean the guide rail, mounting surfaces and adjacent machine components.
Remove burrs, machining residues and contamination that could interfere with accurate alignment.
Check the flatness and geometric accuracy of the mounting surfaces according to the guide system requirements.
The runner block must be installed according to the Bosch Rexroth mounting instructions for the corresponding Ball Rail System.
Avoid removing the runner block from its guide rail without suitable protection for the rolling elements.
When transferring the runner block to another rail, use the appropriate mounting or transport aid specified for the guide system.
Incorrect handling can cause ball loss, seal damage or contamination of the recirculation channels.
Bosch Rexroth R162171420 is designed for relubrication.
Bosch Rexroth Dynalub 510 is among the lubricants used for compatible Rexroth linear ball guide systems, subject to the manufacturer's lubrication instructions and operating conditions.
Lubrication intervals depend on:
Applied loads.
Travel distance.
Operating speed.
Temperature.
Environmental contamination.
Duty cycle.
Insufficient lubrication can increase friction and accelerate wear of the balls and raceways.
In woodworking, metalworking and plastics processing environments, guideways should be protected from dust, chips and process fluids.
Contamination can damage the rolling contacts, reduce seal effectiveness and shorten guide service life.
Where necessary, protective covers, bellows or additional sealing arrangements should be considered.
It is a size 30 recirculating ball runner block for Bosch Rexroth linear guide systems, identified by the technical designation KWD-030-SNH-C1-N-1.
The runner block is 60 mm wide and 97.7 mm long. Its assembly height with the corresponding guide rail is 45 mm.
SNH identifies a slimline runner block with normal length and high-profile construction.
C1 indicates moderate preload, which influences the stiffness, friction and displacement characteristics of the linear guide assembly.
The basic dynamic load rating is 36.5 kN, while the basic static load rating is 48.1 kN. Moment load ratings must also be considered when evaluating the guide arrangement.
No. Compatibility requires the correct rail profile, raceway geometry and guide system. Nominal size 30 alone is insufficient.
Yes. The runner block supports relubrication through the designated lubrication points, following Bosch Rexroth maintenance instructions.
The part number is associated with selected HOMAG/WEEKE spare parts listings, including references 4-006-10-2276 and 4006102276. Compatibility must be verified for the specific machine model and configuration.
Bosch Rexroth R162171420 is a size 30 recirculating ball runner block designated KWD-030-SNH-C1-N-1. It measures 60 mm in width and 97.7 mm in length, with a 45 mm assembly height including the guide rail. The runner block features C1 moderate preload, normal accuracy class N and a basic dynamic load rating of 36.5 kN.
The product is offered through the specialist B2B industrial supply platform simmering.pl, supporting industrial procurement and worldwide shipping from stock in Poland.