35x56x12 VMQ AO/TC silicone double lip rotary shaft oil seal. The AO/TC construction features a primary sealing lip and an additional dust exclusion lip. Dimensions: 35 mm inner diameter, 56 mm outer diameter and 12 mm width. VMQ silicone rubber provides excellent low-temperature flexibility and resistance to ozone and atmospheric ageing. Suitable for compatible industrial applications requiring appropriate thermal and sealing properties. Available through the specialist B2B industrial supply platform simmering.pl.
|
Parameter |
Specification |
|---|---|
|
Product name |
Silicone Rotary Shaft Oil Seal 35x56x12 VMQ AO/TC |
|
Product type |
Radial rotary shaft oil seal |
|
Seal design |
AO / TC |
|
Construction |
Double lip |
|
Material |
Silicone rubber |
|
Material designation |
VMQ |
|
Inner diameter (d) |
35 mm |
|
Outer diameter (D) |
56 mm |
|
Width (B) |
12 mm |
|
Dimensions |
35x56x12 mm |
|
Primary sealing lip |
Yes |
|
Additional dust exclusion lip |
Yes |
|
Outer surface |
Rubber-covered |
|
Garter spring |
Typical of AO/TC construction; exact specification requires confirmation |
|
Rotation direction |
Not specified |
|
Operating temperature range |
Depends on the silicone compound |
|
Manufacturer |
Not specified |
The designations AO and TC are used in different classification systems for radial rotary shaft oil seals.
In typical applications, both refer to a seal featuring a rubber-covered outer diameter, a primary sealing lip and an additional dust exclusion lip.
The primary sealing lip helps prevent leakage of a compatible lubricant where a rotating shaft passes through the stationary housing of a mechanical assembly.
In standard AO/TC constructions, a circumferential garter spring typically helps maintain contact between the sealing lip and the shaft surface.
Correct sealing performance depends on lubrication, operating temperature, rotational speed and shaft surface condition.
The secondary lip provides additional protection against external contamination.
It helps reduce the ingress of:
Dust and fine particles.
Dirt and external contaminants.
Small particles originating from the surrounding environment.
Light splashes, depending on operating conditions.
The additional dust exclusion lip is not a second primary oil-retaining lip.
It also does not guarantee watertight performance during immersion or exposure to high-pressure water.
The rubber-covered outer surface helps provide static sealing between the oil seal and its mounting bore.
It may also compensate for minor housing surface irregularities when the required installation tolerances are maintained.
Important: AO and TC are functionally comparable construction designations, but detailed sealing geometry may differ between manufacturers.
VMQ is the standardized material designation for silicone rubber containing vinyl groups.
It belongs to the silicone elastomer family, which has different properties from commonly used industrial sealing materials such as NBR, ACM and FPM/FKM.
The designation MVQ may also appear in commercial product descriptions.
However, VMQ is the preferred designation for precise technical material identification.
Silicone rubber is particularly valued for its excellent flexibility at low temperatures and resistance to atmospheric ageing.
These characteristics may be beneficial in selected mechanical assemblies operating across a broad temperature range.
However, silicone also has mechanical limitations that must be considered when selecting a dynamic rotary shaft oil seal.
Excellent flexibility at low temperatures.
Good resistance to elevated temperatures.
Very good ozone resistance.
High resistance to ultraviolet radiation.
Very good resistance to atmospheric ageing.
Retention of flexibility across a broad temperature range, depending on the compound.
Suitability for selected applications requiring the thermal characteristics of silicone rubber.
Silicone is not a universal material for every dynamic sealing application.
Compared with certain other elastomers, it may exhibit:
Lower abrasion resistance.
Reduced tear resistance.
Limited compatibility with selected oils and solvents.
Greater susceptibility to mechanical damage during installation.
Limitations under demanding friction conditions and high rotational speeds.
Important: the thermal resistance of VMQ silicone rubber does not automatically mean that a silicone rotary shaft oil seal is suitable for high rotational speeds.
In dynamic sealing applications, friction-generated heat at the contact area between the sealing lip and the shaft must also be considered.
|
Dimension |
Meaning |
|---|---|
|
35 mm |
Nominal shaft diameter |
|
56 mm |
Nominal housing bore diameter |
|
12 mm |
Nominal axial seal width |
The difference between the outer and inner diameters is 21 mm.
This corresponds to a nominal radial cross-sectional thickness of 10.5 mm.
The dimensions 35x56x12 mm define the basic installation geometry.
An oil seal with incorrect dimensions may not fit properly into the housing or maintain the required contact with the rotating shaft.
However, dimensional compatibility alone does not guarantee interchangeability.
Material, sealing construction and operating conditions must also be considered.
Double-lip silicone rotary shaft oil seals may be used in appropriately selected mechanical assemblies requiring the thermal and elastic properties of VMQ silicone rubber.
Potential applications for this product category include:
Selected industrial machinery.
Mechanisms operating at low temperatures.
Mechanical assemblies exposed to elevated temperatures.
Rotating shafts operating with compatible lubricants.
Equipment requiring additional dust protection.
Specialized mechanical systems where the equipment manufacturer specifies VMQ silicone rubber.
These are general examples of potential applications for this material and construction.
They do not constitute verified compatibility with any particular machine.
It may be suitable only when its material, construction and operating characteristics meet the requirements of the specific gearbox.
Not every silicone rotary shaft oil seal is suitable for use with gear oil.
Chemical compatibility, operating temperature and shaft speed must be verified before installation.
|
Property |
VMQ Silicone |
NBR |
FPM/FKM |
|---|---|---|---|
|
Low-temperature flexibility |
Generally excellent |
Compound-dependent |
Compound-dependent |
|
Elevated temperature resistance |
Good to very good |
Generally lower |
Very good |
|
Ozone resistance |
Very good |
Generally limited |
Very good |
|
Resistance to many mineral oils |
Depends on compound and conditions |
Generally good |
Generally very good |
|
Abrasion resistance |
Generally limited |
Generally better |
Compound-dependent |
|
Atmospheric ageing resistance |
Very good |
Generally lower |
Very good |
NBR is widely used in conventional oil-lubricated mechanical systems.
VMQ may be advantageous in applications requiring excellent flexibility at low temperatures.
However, this does not mean silicone will provide longer service life in every dynamic sealing application.
The correct choice depends on operating conditions.
FPM/FKM often provides more suitable resistance to many oils, fuels and other chemical substances.
VMQ silicone rubber is particularly valued for its excellent low-temperature flexibility.
Material selection should always be based on the actual requirements of the mechanical assembly.
|
Feature |
AO/TC – Double Lip |
A/SC – Single Lip |
|---|---|---|
|
Primary sealing lip |
Yes |
Yes |
|
Additional dust exclusion lip |
Yes |
No |
|
Primary lip garter spring |
Typically yes |
Typically yes |
|
Outer surface |
Rubber-covered |
Rubber-covered |
|
Additional dust protection |
Yes |
No |
|
Main function |
Lubricant retention and reduced contamination ingress |
Lubricant retention |
Interchangeability should not be assumed automatically.
A single-lip oil seal does not have the additional dust exclusion lip found in an AO/TC construction.
Consequently, it may provide less protection against external contamination.
The equipment manufacturer's sealing requirements should be checked before selecting an alternative construction.
Before purchasing, verify the following parameters:
Shaft diameter: 35 mm.
Housing bore diameter: 56 mm.
Seal width: 12 mm.
Construction: AO/TC – double lip.
Material: VMQ silicone rubber.
Operating medium: Chemical compatibility with the specific silicone compound.
Operating temperature: Permissible service temperature range.
Rotational speed: Compatibility with dynamic operating requirements.
Lubrication conditions: Suitability for the sealing lip material.
Shaft surface condition: Absence of excessive wear or mechanical damage.
When replacing an NBR or FPM/FKM oil seal with a VMQ silicone version, confirm that the material change is technically acceptable.
The sealing lip operates in contact with the rotating shaft.
Suitable lubrication helps reduce friction and heat generation.
Insufficient lubrication can cause excessive wear and premature seal failure.
This is particularly important when using elastomers with relatively limited abrasion resistance.
Correct installation is essential for reliable sealing performance and durability of silicone sealing lips.
1. Clean the shaft and housing bore. Remove dirt, lubricant residues and other contaminants.
2. Inspect the shaft surface. Check for scratches, wear grooves and corrosion.
3. Protect the sealing lips. Prevent contact with sharp edges, threads and splines.
4. Avoid excessive deformation. Do not overstretch or unnecessarily deform the silicone elastomer.
5. Apply compatible installation lubrication. Follow the manufacturer's recommendations.
6. Maintain the correct orientation. Position the primary sealing lip correctly relative to the sealed medium.
7. Install the seal evenly. Use an appropriate installation tool.
8. Avoid direct impact. Do not strike the sealing surfaces or deform the seal housing.
9. Verify correct seating. Inspect the installation before starting the mechanical assembly.
For double-lip constructions, follow the manufacturer's instructions concerning lubrication of the space between the primary sealing lip and the additional dust exclusion lip.
Incorrect installation may cause premature wear, increased friction or lubricant leakage.
It is a radial rotary shaft oil seal with a nominal inner diameter of 35 mm, outer diameter of 56 mm and width of 12 mm. VMQ identifies silicone rubber, while AO/TC indicates double-lip construction.
In many classification systems, AO and TC refer to functionally comparable double-lip oil seals with rubber-covered outer diameters. However, detailed construction may vary between manufacturers.
VMQ silicone rubber offers good resistance to elevated temperatures. The exact permissible operating range depends on the silicone compound and seal construction.
Compatibility depends on the type of oil, chemical additives, operating temperature and specific silicone compound. Universal compatibility with all oils should not be assumed.
Such replacement requires technical verification. Identical dimensions do not guarantee material compatibility or adequate durability under dynamic operating conditions.
Not in every application. VMQ generally provides excellent low-temperature flexibility, while FPM/FKM often offers more suitable resistance to many oils and fuels.
It may help reduce the ingress of light splashes and external contaminants, but it does not guarantee sealing performance during immersion or exposure to pressurized water.
The AO/TC designation alone does not establish a specific rotation direction. No directional hydrodynamic grooves or rotation-specific features have been confirmed for this product.
The 35x56x12 VMQ AO/TC silicone rotary shaft oil seal is a double-lip radial sealing component manufactured from silicone rubber. Its construction features a primary sealing lip and an additional dust exclusion lip. VMQ offers excellent low-temperature flexibility and resistance to atmospheric ageing. Correct selection requires verification of lubricant compatibility, temperature, rotational speed and lubrication conditions.
The 35x56x12 VMQ AO/TC silicone double lip rotary shaft oil seal combines the thermal and elastic properties of silicone rubber with additional protection against external contamination.
Its primary sealing lip helps retain compatible lubricants, while the secondary dust exclusion lip reduces the ingress of dust and fine particles.
VMQ silicone rubber may be suitable for selected mechanical applications requiring low-temperature flexibility and resistance to thermal and atmospheric ageing.
However, lubricant compatibility, shaft speed, operating temperature and sealing requirements must be verified before installation.
The specialist B2B industrial supply platform simmering.pl offers radial rotary shaft oil seals in various dimensions, constructions and elastomer materials, including VMQ silicone, NBR, FPM/FKM and ACM.
Our product range supports industrial maintenance, professional procurement and accurate replacement part identification.
Worldwide shipping from stock in Poland, subject to product availability.
Data sheet
You might also like