NBR O-ring 145x5 mm 70 Shore A, elastomeric sealing ring with 145 mm inner diameter and 5 mm cross-section. Manufactured from nitrile butadiene rubber with nominal hardness of 70 Shore A. Designed for properly engineered static seals and selected dynamic applications. NBR offers good resistance to many mineral oils and industrial greases. Selection requires verification of fluid compatibility, temperature, pressure and groove dimensions. Available through the specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Product type |
O-ring - elastomeric sealing ring |
|
Material |
NBR - nitrile butadiene rubber |
|
Inner diameter (d1) |
145 mm |
|
Cross-sectional diameter (d2) |
5 mm |
|
Nominal dimensions |
145x5 mm |
|
Nominal outer diameter |
155 mm |
|
Nominal hardness |
70 Shore A |
|
Cross-sectional shape |
Circular |
|
Sealing application |
Static and selected dynamic applications |
|
Primary function |
Preventing or restricting fluid leakage |
|
Mineral oil resistance |
Generally good, depending on compound |
|
Industrial grease resistance |
Depends on lubricant formulation |
|
Dimensional standard |
Not confirmed for this specific product |
|
Operating temperature range |
Requires confirmation for the specific NBR compound |
|
Maximum operating pressure |
Depends on groove design and operating conditions |
|
Package quantity |
To be confirmed |
The nominal outer diameter of 155 mm is calculated as:
145 mm + (2 x 5 mm) = 155 mm
This is a calculated nominal dimension, not a separately verified measurement of the finished product.
The first value indicates the nominal inner diameter of the O-ring:
145 mm
This dimension is essential when selecting an O-ring for a specific sealing groove or mechanical assembly.
The second value indicates the nominal cross-sectional diameter:
5 mm
The O-ring has a circular cross-section that undergoes controlled compression when installed in a correctly designed groove.
This compression creates contact pressure against the mating sealing surfaces.
NBR is a synthetic elastomer widely used in industrial sealing applications.
Its properties depend on the formulation, particularly the acrylonitrile content and additives used during manufacturing.
Typical characteristics include:
Good resistance to many mineral oils.
Compatibility with selected industrial greases.
Good elasticity under suitable operating conditions.
Abrasion resistance depending on the compound.
Suitability for numerous hydraulic and pneumatic sealing applications.
Mechanical properties appropriate for conventional industrial sealing systems.
NBR is not universally resistant to all solvents, fuels, brake fluids or elevated temperatures.
Compatibility with the specific operating medium must always be verified.
The value of 70 Shore A indicates the nominal hardness of the rubber compound on the Shore A scale.
Hardness influences several important sealing characteristics:
Resistance to deformation.
Contact pressure within the sealing groove.
Behaviour under fluid pressure.
Resistance to extrusion into clearance gaps.
Installation requirements.
Friction in dynamic applications.
A hardness of 70 Shore A is commonly used in industrial O-rings.
However, its suitability must be assessed together with groove geometry, operating pressure and other application requirements.
An O-ring is a continuous elastomeric ring with a circular cross-section.
When installed in a properly designed groove, it is compressed between two mating surfaces.
The resulting elastic deformation creates sealing contact pressure.
Pressure from the sealed medium may additionally increase the contact force between the O-ring and the sealing surfaces.
In static connections, an O-ring can be installed between components that do not move relative to one another.
Typical examples include:
Covers and equipment housings.
Flanged connections.
Hydraulic component housings.
Industrial tank covers.
Valve bodies.
Hydraulic manifolds.
Mechanical assemblies requiring fluid-tight connections.
Successful sealing requires correct groove dimensions, compression and material selection.
NBR O-rings with a nominal hardness of 70 Shore A may also be used in properly designed dynamic sealing systems.
Such applications often involve reciprocating movement.
Important operating factors include:
Friction.
Lubrication.
Movement speed.
Fluid pressure.
Clearance gaps.
Risk of elastomer extrusion.
Surface finish of mating components.
A conventional O-ring should not automatically be considered a direct replacement for a rotary shaft oil seal.
NBR sealing rings with this cross-section may be used in appropriately designed industrial assemblies, including:
Hydraulic systems.
Industrial oil installations.
Flanged mechanical connections.
Industrial machinery housings.
Pneumatic equipment.
Gearbox and drive system components.
Covers and casings of technical equipment.
Valve and fluid control assemblies.
These are potential applications of NBR sealing technology rather than confirmed equipment-specific applications of this particular O-ring.
Compatibility must be established by checking the actual dimensions and operating conditions.
|
Material / version |
Characteristics |
Main difference |
|---|---|---|
|
NBR 70 Shore A |
Medium-hardness nitrile rubber |
Common oil-based sealing applications |
|
NBR 90 Shore A |
Harder nitrile rubber |
Greater extrusion resistance under suitable conditions |
|
FKM 70 Shore A |
Fluoroelastomer |
Different chemical and temperature resistance |
|
EPDM 70 Shore A |
Ethylene propylene rubber |
Suitable for selected water-based media |
|
VMQ 70 Shore A |
Silicone rubber |
Different temperature and mechanical characteristics |
Both materials belong to the nitrile rubber family.
The primary difference is their nominal hardness.
NBR 90 Shore A is harder and may offer greater resistance to extrusion under appropriate operating conditions.
However, higher hardness also affects compression behaviour, contact forces and installation requirements.
FKM fluoroelastomers generally offer different chemical and temperature resistance characteristics compared with NBR.
The correct material depends on the operating medium, temperature and sealing requirements.
EPDM is often selected for certain water-based applications.
NBR is commonly preferred for many mineral oil applications.
The materials should not be interchanged without verifying chemical compatibility.
Before ordering, verify the following parameters:
Inner diameter: 145 mm.
Cross-sectional diameter: 5 mm.
Elastomer material: NBR.
Nominal hardness: 70 Shore A.
Sealing groove dimensions and geometry.
Required compression ratio.
Type of sealed medium.
Operating pressure and temperature.
Static or dynamic operating conditions.
Chemical compatibility and service life requirements.
Important: The dimensions 145x5 mm alone are insufficient to determine the maximum permissible operating pressure.
Pressure capability also depends on the clearance gap, elastomer hardness, groove geometry and overall sealing arrangement.
Correct installation is essential for reliable sealing performance.
Before installation, clean the sealing groove and all mating surfaces.
Inspect the O-ring for cuts, cracks and permanent deformation.
Remove sharp edges and burrs from the installation area.
Avoid twisting the O-ring during installation.
Do not stretch the ring excessively.
Use a suitable assembly lubricant when required.
Ensure the O-ring is positioned evenly inside the groove.
Prevent pinching or cutting when assembling the components.
Verify that the O-ring is compatible with the installation lubricant.
Correct installation helps reduce the risk of premature damage and fluid leakage.
The sealing groove must provide sufficient space for the O-ring to deform correctly.
Excessive compression may increase stress and accelerate deterioration.
Insufficient compression may result in inadequate sealing contact.
The correct groove dimensions depend on the sealing application and relevant design standards.
The following designations may be used for product identification:
NBR O-ring 145x5 mm 70 Shore A
O-ring 145x5 NBR 70
O-ring NBR 145x5 70 Shore
Nitrile O-ring 145x5 mm
Rubber Sealing Ring 145x5 NBR
O-ring ID 145 mm CS 5 mm
NBR 70 Shore A Sealing Ring 145x5
Industrial O-ring 145x5 NBR
Metric NBR O-ring 145x5 mm
The nominal inner diameter is 145 mm and the cross-sectional diameter is 5 mm.
The calculated nominal outer diameter is 155 mm.
NBR stands for nitrile butadiene rubber.
It is a synthetic elastomer commonly used in sealing applications involving oils and greases.
70 Shore A indicates the nominal hardness of the elastomer on the Shore A hardness scale.
This property influences compression behaviour, sealing contact pressure and resistance to deformation.
NBR generally provides good resistance to many mineral oils.
Compatibility with a particular lubricant and its additives must be verified.
Yes, provided the groove design, pressure, material and other operating parameters are suitable.
It may be used in properly designed dynamic sealing systems, particularly reciprocating applications.
It is not automatically suitable for rotary shaft sealing.
Not without technical verification.
Higher hardness affects compression, contact pressure, friction and installation requirements.
Compliance with ISO 3601 cannot be confirmed without documentation specifying the dimensional tolerances and quality requirements of this particular product.
NBR O-ring 145x5 mm 70 Shore A is an elastomeric sealing ring with a nominal inner diameter of 145 mm and a cross-sectional diameter of 5 mm. Manufactured from nitrile butadiene rubber with a nominal hardness of 70 Shore A, it is primarily intended for properly designed static seals and selected dynamic applications. Correct selection requires verification of fluid compatibility, temperature, pressure and groove geometry.
Available through the specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.
You might also like