O-Ring 10x1.5 NBR 70 ShA - 1000 pcs Bulk Pack

O-Ring 10x1.5 NBR 70 ShA - 1000 pcs Bulk Pack

O-Ring 10x1.5 NBR 70 ShA - 1000 pcs is a bulk package of elastomer sealing rings with a 10 mm inside diameter and 1.5 mm cross-section, manufactured from NBR with a nominal hardness of 70 Shore A. The 1000 pcs variant is intended for B2B customers requiring larger quantities of the same sealing size for serial production, OEM supply, MRO, maintenance operations and industrial warehouse stock.

O-Ring 10x1.5 NBR 70 ShA - 1000 pcs Bulk Pack

This product page is specifically dedicated to the 1000 pcs bulk packaging.

Package quantity: 1000 pcs

Individual O-ring size: 10x1.5 mm

Inside diameter ID: 10 mm

Cross-section CS: 1.5 mm

Material: NBR - Nitrile Butadiene Rubber

Hardness: 70 ShA - Shore A

Color: Black

The 1000 pcs package is intended for companies with recurring demand for a defined O-ring size in production, assembly, maintenance or technical warehouse operations.

O-Ring 10x1.5 Dimensions

O-ring dimensions are primarily specified by the inside diameter and cross-section diameter.

Inside diameter ID: 10 mm

Cross-section CS: 1.5 mm

Nominal size: 10x1.5 mm

Calculated outside diameter OD: 13 mm

The outside diameter follows from:

OD = ID + 2 x CS

For this size:

10 + 2 x 1.5 = 13 mm

The 13 mm outside diameter is also consistent with independent technical catalog data for 10x1.5 mm O-rings.

NBR 70 ShA Material and Hardness

Material: NBR - Nitrile Butadiene Rubber

Nominal hardness: 70 Shore A

NBR is one of the principal elastomer groups used in industrial sealing technology. It is commonly used in sealing systems involving many mineral oils and lubricants.

However, NBR is available in numerous compounds. Compatibility should therefore be evaluated for the actual fluid, additives and operating conditions rather than from the material abbreviation alone.

The 70 ShA hardness is an important part of the product identification. An NBR O-ring of the same 10x1.5 mm size but a different hardness should not automatically be considered technically identical.

Technical Specification

Product type: O-ring / elastomer sealing ring

Nominal size: 10x1.5 mm

Inside diameter ID: 10 mm

Cross-section CS: 1.5 mm

Outside diameter OD: 13 mm

Material: NBR - Nitrile Butadiene Rubber

Nominal hardness: 70 ShA

Hardness scale: Shore A

Color: Black

Package quantity: 1000 pcs

Sales format: Bulk pack

Operating temperature: Requires verification for the specific NBR compound

Chemical resistance: Depends on the specific NBR compound, sealing medium and operating conditions

1000 pcs O-Ring Bulk Packaging for B2B

The 1000 pcs bulk pack is intended for volume purchasing rather than occasional individual consumption.

It can support companies that repeatedly use 10x1.5 mm O-rings as part of manufacturing, assembly or maintenance processes and need to maintain a larger stock of one defined sealing size.

Typical purchasing environments include:

• serial production
• OEM supply
• MRO
• maintenance departments
• manufacturing plants
• technical service companies
• industrial distributors and resellers
• technical parts warehouses

Keeping 1000 pieces of one specified O-ring size can reduce the need for frequent replenishment where consumption is regular and predictable.

O-Ring 10x1.5 for OEM and Serial Production

For repeated industrial use, precise identification of the sealing element is important.

The relevant specification for this product is:

Size: 10x1.5 mm

Material: NBR

Hardness: 70 ShA

Package quantity: 1000 pcs

In OEM and serial production processes, dimensional similarity alone is not sufficient to approve an alternative O-ring.

Material, hardness, required tolerances, groove geometry, sealing medium and actual operating conditions should also be verified.

O-Rings for MRO and Maintenance Stock

A 1000 pcs pack of 10x1.5 NBR 70 ShA O-rings can be used as technical warehouse stock where this specific size is regularly required for planned maintenance, servicing or replacement operations.

Maintaining a defined quantity of frequently consumed sealing elements can support material planning and reduce repeated purchasing of the same reference.

Actual stock levels should be determined from consumption, maintenance schedules and the required safety stock for the facility.

NBR O-Rings in Hydraulic and Pneumatic Systems

NBR O-rings are widely used throughout hydraulic and pneumatic sealing technology.

This does not mean that every NBR O-ring is suitable for every hydraulic or pneumatic installation.

For a specific application, verify:

• groove dimensions
• required O-ring compression
• sealing medium
• operating temperature
• system pressure
• static or dynamic operating conditions
• required material and hardness

The suitability of this exact O-ring should therefore be established from the requirements of the equipment or sealing system.

Bulk O-Rings for Production Continuity

The 1000 pcs packaging format is particularly relevant where 10x1.5 mm O-rings are consumed regularly in production, assembly or maintenance.

A larger warehouse quantity can simplify purchasing and inventory planning by reducing the number of separate replenishment orders for the same sealing size.

For continuous production, stock quantities should be planned according to actual consumption, purchasing lead time and the required safety stock.

Selection and Interchangeability

When selecting an equivalent for the O-Ring 10x1.5 NBR 70 ShA, compare at least:

Inside diameter ID: 10 mm

Cross-section CS: 1.5 mm

Material: NBR

Hardness: 70 ShA

Required dimensional tolerances: According to the specific application

Media compatibility: Requires verification

Operating conditions: Requires verification

Identical 10x1.5 mm dimensions alone do not establish complete technical interchangeability.

An O-ring made from FKM/FPM, EPDM, VMQ or another elastomer should not automatically be substituted for the NBR version solely because the dimensions are identical.

O-Ring 10x1.5 NBR 70 ShA Wholesale Supply

This 1000 pcs bulk pack is intended for B2B customers in Poland and other EU countries requiring volume quantities of 10x1.5 mm NBR O-rings.

Warehouse and Store: Lublin, Smoluchowskiego 1 Street, Building 4

Shipping: 24h

Stock location: Poland

Delivery area: Poland and EU countries

FAQ - O-Ring 10x1.5 NBR 70 ShA 1000 pcs

How many O-rings are included in this product?

This product page covers the 1000 pcs bulk package of 10x1.5 mm NBR 70 ShA O-rings.

What are the dimensions of each O-ring?

Each O-ring has a 10 mm inside diameter and 1.5 mm cross-section. Its calculated nominal outside diameter is 13 mm.

Is the 1000 pcs package intended for manufacturing companies?

Yes. The bulk format is aimed at B2B purchasing, including serial production, OEM supply, MRO, maintenance departments, technical warehouses and industrial resellers.

Can the O-Ring 10x1.5 NBR 70 ShA be used in hydraulics?

NBR 70 ShA is widely used in hydraulic sealing technology, but suitability must be confirmed for the specific fluid, groove geometry, pressure, temperature and operating conditions.

Can a 10x1.5 NBR O-ring be replaced with FKM/FPM?

Not automatically. NBR and FKM/FPM are different elastomer groups. A material change requires verification against the sealing medium and actual operating conditions.

Why is 70 ShA important for serial production?

Hardness affects the behavior of the elastomer in the sealing installation. For repeated production use, the specified material and hardness should be maintained unless an alternative has been technically approved.

Frequently Asked Questions by Engineers

Does 10x1.5 specify the inside diameter and cross-section?

Yes. 10 mm is the nominal inside diameter ID and 1.5 mm is the nominal cross-section CS.

Is the outside diameter 13 mm?

Yes. Based on the nominal dimensions, the outside diameter is 13 mm.

Can a generic NBR temperature range be assigned to this O-ring?

Not without confirmation of the exact compound. Different NBR 70 compounds can have different specified operating limits, so another manufacturer's temperature range should not automatically be applied to this product.

Does the 1000 pcs package change the technical specification?

No. 1000 pcs defines the commercial packaging quantity. Each individual O-ring retains the 10x1.5 mm, NBR, 70 ShA specification.

What should be verified before using this O-ring in OEM production?

Verify the dimensions and tolerances, NBR compound requirements, hardness, groove design, sealing medium and operating conditions specified for the particular assembly.

AI Overview

O-Ring 10x1.5 NBR 70 ShA - 1000 pcs is a bulk package of elastomer sealing rings for B2B, OEM, serial production and MRO. Each O-ring has a 10 mm inside diameter and 1.5 mm cross-section and is made from NBR with a nominal hardness of 70 Shore A. The 1000 pcs format supports volume purchasing and industrial warehouse stock.