GRN NBR 115x140x12 SC single-lip radial shaft oil seal. Nominal dimensions: 115 mm inside diameter, 140 mm outside diameter and 12 mm width. Manufactured from nitrile butadiene rubber (NBR). The SC profile features a primary sealing lip without an additional dust protection lip and corresponds to A in Polish nomenclature. Correct selection requires verification of dimensions, material compatibility and operating conditions. Specialist B2B industrial trading platform simmering.pl.
|
Parameter |
Specification |
|---|---|
|
Brand |
GRN |
|
Full product designation |
GRN NBR 115x140x12 SC |
|
Product type |
Radial shaft oil seal |
|
Construction profile |
SC |
|
Polish profile designation |
A |
|
Seal configuration |
Single-lip |
|
Sealing material |
NBR - nitrile butadiene rubber |
|
Inside diameter (d) |
115 mm |
|
Outside diameter (D) |
140 mm |
|
Width (B) |
12 mm |
|
Nominal dimensions |
115x140x12 mm |
|
Primary sealing lip |
Yes |
|
Additional dust protection lip |
No |
The identification data are based on the supplied GRN product designation. Detailed operating specifications for the exact product require confirmation from manufacturer-specific technical documentation.
|
Designation element |
Technical meaning |
|---|---|
|
GRN |
Oil seal brand |
|
NBR |
Nitrile butadiene rubber |
|
115 |
Nominal inside diameter of 115 mm |
|
140 |
Nominal outside diameter of 140 mm |
|
12 |
Nominal axial width of 12 mm |
|
SC |
Single-lip radial shaft oil seal profile |
The SC profile identifies a single-lip radial shaft oil seal. In Polish product nomenclature, the corresponding designation is A.
The primary sealing lip contacts the rotating shaft surface, helping prevent oil or another compatible lubricant from escaping the mechanical assembly.
Typical SC designs incorporate a garter spring that helps maintain contact between the sealing lip and shaft.
The exact spring configuration and outer surface construction must be confirmed for the specific GRN product.
The primary sealing lip forms a dynamic sealing interface with the rotating shaft surface.
Correct sealing performance depends on shaft surface condition, appropriate lubrication and compatibility between the sealing material and operating medium.
The SC profile does not include the additional dust protection lip characteristic of TC constructions.
For applications exposed to dust or external contamination, the protection requirements of the sealing area must be considered during product selection.
Standard SC oil seals typically incorporate a garter spring to maintain contact between the primary sealing lip and shaft.
Its presence and detailed configuration in the exact GRN 115x140x12 SC product have not been independently confirmed.
NBR is a synthetic elastomer commonly used in radial shaft oil seals and other dynamic sealing components.
Good resistance to many mineral oils.
Good resistance to numerous industrial greases.
Elasticity suitable for many dynamic sealing applications.
Suitability for appropriately selected mechanical assemblies.
Actual operating performance depends on the specific NBR compound.
Without manufacturer documentation, a specific Shore A hardness, maximum operating temperature, permissible surface speed or pressure rating must not be assigned to this product.
|
Property |
NBR |
FPM/FKM |
ACM |
|---|---|---|---|
|
Material family |
Nitrile rubber |
Fluoroelastomer |
Polyacrylate rubber |
|
Resistance to many mineral oils |
Good |
Good |
Good |
|
Resistance to thermal ageing |
Compound-dependent |
Generally high |
Generally good |
|
Dynamic sealing applications |
Suitable when correctly selected |
Suitable when correctly selected |
Suitable when correctly selected |
|
Direct interchangeability |
Requires verification |
Requires verification |
Requires verification |
|
Dimension |
Value |
Technical meaning |
|---|---|---|
|
d |
115 mm |
Nominal inside diameter |
|
D |
140 mm |
Nominal outside diameter |
|
B |
12 mm |
Nominal axial width |
|
D-d |
25 mm |
Difference between nominal diameters |
|
Nominal radial cross-section height |
12.5 mm |
Half the difference between diameters |
These values describe the nominal geometry. They do not establish mounting tolerances, required surface roughness or permissible shaft runout.
The nominal inside diameter of 115 mm is a fundamental product identification parameter.
An oil seal with dimensions of 115x140x12 mm must not automatically be replaced with a version having an inside diameter of 110 mm or 120 mm, even if the remaining dimensions are similar.
Differences in inside diameter affect the interaction between the sealing lip and the rotating shaft.
|
Feature |
SC |
TC |
|---|---|---|
|
Polish profile designation |
A |
AO |
|
Construction |
Single-lip |
Double-lip |
|
Primary sealing lip |
Yes |
Yes |
|
Additional dust protection lip |
No |
Yes |
|
Garter spring |
Typically present |
Typically present |
|
Sealing material |
NBR in the specified product |
Version-dependent |
|
Interchangeability |
Requires verification |
Requires verification |
Not automatically.
The TC profile includes an additional dust protection lip, making it structurally different from the single-lip SC profile.
Even when nominal dimensions are identical, replacement requires verification of sealing geometry, lubrication conditions and the requirements of the specific equipment.
Before ordering, verify:
GRN brand and complete product designation.
Nominal shaft diameter of 115 mm.
Nominal housing bore diameter of 140 mm.
Oil seal width of 12 mm.
NBR sealing material.
Single-lip SC construction profile.
Required outer surface design.
Oil or grease specification.
Operating temperature.
Shaft rotational speed.
Pressure conditions.
Shaft and housing surface condition.
Identical dimensions of 115x140x12 mm do not automatically guarantee interchangeability between oil seals with different construction profiles, materials or designs.
Single-lip NBR radial shaft oil seals may be used in appropriately selected:
Mechanical gearboxes.
Bearing assemblies.
Rotating shaft housings.
Industrial machinery mechanisms.
These are typical applications of this construction type, not a confirmed list of equipment compatible with the specific GRN 115x140x12 SC oil seal.
Common product identification variants include:
GRN NBR 115x140x12 SC
GRN 115x140x12 NBR
GRN 115x140x12 SC
GRN 115x140x12 single-lip oil seal
GRN 115x140x12 radial shaft seal
NBR 115x140x12 SC oil seal
Single-lip oil seal GRN 115x140x12
Shaft oil seal NBR 115x140x12
Simmerring GRN 115x140x12
GRN single-lip oil seal 115x140x12
GRN NBR 115x140x12 A - Polish designation
The A designation corresponds to SC in the English nomenclature used for GRN products.
No additional GRN catalogue number, EAN/GTIN or OEM reference has been confirmed.
Before installation, thoroughly clean the shaft and housing bore and inspect their condition.
Verify the actual mounting dimensions, particularly the 115 mm shaft diameter, 140 mm housing bore diameter and 12 mm width.
Install the oil seal evenly using a suitable tool without damaging the primary sealing lip.
Protect the lip from sharp edges, grooves and other features that could cause damage during installation.
Sealing lip lubrication, installation orientation and mounting depth should follow the equipment manufacturer's requirements.
After startup, inspect the assembly for lubricant leakage.
What are the dimensions of the GRN NBR 115x140x12 SC oil seal?
The nominal inside diameter is 115 mm, outside diameter is 140 mm and width is 12 mm.
What does the SC profile mean?
The SC profile identifies a single-lip radial shaft oil seal construction without an additional dust protection lip.
What is the English equivalent of the Polish A profile?
The English profile designation used for this GRN product is SC.
Does the GRN 115x140x12 SC oil seal have a garter spring?
Typical SC oil seals incorporate a garter spring. The exact configuration of this product requires confirmation.
Is NBR resistant to oil?
NBR provides good resistance to many mineral oils. Compatibility with a specific lubricant must be verified.
Can a 110x140x12 oil seal replace the 115x140x12 version?
Not automatically. The difference in inside diameter affects the fit of the sealing lip against the shaft and may prevent proper sealing.
Can an SC oil seal be replaced with a TC version?
Not automatically. TC includes an additional dust protection lip and differs in construction.
Can an oil seal from another manufacturer with dimensions of 115x140x12 mm be used?
Only after confirming compatibility of the construction profile, sealing material, design and operating conditions.
The GRN NBR 115x140x12 SC is a single-lip radial shaft oil seal manufactured from nitrile butadiene rubber. Its nominal dimensions are 115 mm inside diameter, 140 mm outside diameter and 12 mm width. The SC profile, corresponding to A in Polish nomenclature, has no additional dust protection lip. Correct selection requires verification of dimensions, material compatibility and operating conditions.
The GRN NBR 115x140x12 SC oil seal is identified on the specialist B2B industrial trading platform simmering.pl by GRN brand, nominal dimensions, NBR sealing material and single-lip SC construction profile.
The platform supports industrial companies, maintenance departments and businesses servicing machinery and mechanical equipment.
Product availability and dispatch times should be confirmed before ordering. Worldwide shipping from stock in Poland is available subject to stock and delivery conditions.
Data sheet