60x90x10 NBR SC Single Lip Oil Seal. Shaft diameter: 60 mm. Outside diameter: 90 mm. Width: 10 mm. Material: NBR. Design: SC - single lip. Primary sealing lip: Spring-loaded. Additional dust lip: No. Radial shaft seal for rotating shaft applications.
Warehouse and Store: Lublin, Smoluchowskiego 1 Street, Building 4.
24h Shipping. Available from stock in Poland for delivery across the EU.
Rotary Shaft Seal 60x90x10 NBR SC is a single lip radial shaft oil seal designed for rotating shafts. Its nominal dimensions are 60x90x10 mm, corresponding to a 60 mm shaft diameter, 90 mm outside diameter and 10 mm width. The seal is manufactured from NBR - Nitrile Butadiene Rubber. The SC configuration uses a spring-loaded primary sealing lip without an additional dust lip.
Product type: Radial shaft oil seal / rotary shaft seal
Dimensions: 60x90x10 mm
Shaft diameter d: 60 mm
Outside diameter D: 90 mm
Width B: 10 mm
Material: NBR - Nitrile Butadiene Rubber
Design: SC
Lip configuration: Single lip
Primary sealing lip: Spring-loaded
Additional dust lip: No
The principal dimensions are:
Shaft diameter d: 60 mm
Outside diameter D: 90 mm
Width B: 10 mm
Complete dimensions: 60x90x10 mm
The 60 mm inside diameter corresponds to the nominal shaft diameter at the sealing position.
The 90 mm outside diameter corresponds to the nominal housing bore.
The axial width of the seal is 10 mm.
All three dimensions should be checked together with the material and sealing profile when selecting a replacement.
Sealing material: NBR - Nitrile Butadiene Rubber
NBR is one of the established elastomer families used in radial shaft sealing technology. It is commonly used in sealing systems involving many compatible mineral oils and lubricating greases.
Exact compatibility depends on the specific NBR compound, operating medium, additives, temperature and actual service conditions.
An FKM/FPM, ACM, VMQ or other elastomer seal measuring 60x90x10 mm should not automatically be considered technically equivalent.
Design: SC - single lip
Primary sealing lip: Spring-loaded
Additional dust lip: No
The primary sealing lip operates directly against the rotating shaft surface and performs the main sealing function.
A garter spring supports the primary lip and helps maintain radial contact between the sealing edge and the shaft.
The absence of an additional dust lip distinguishes this SC version from a double lip AO/TC seal.
The SC design incorporates a spring-loaded primary sealing lip.
The garter spring helps maintain the required contact between the sealing edge and the rotating shaft.
During installation, the sealing lip should be protected from sharp edges, threads, keyways and other features that could cut, fold or damage the sealing edge.
The installation direction should also be checked according to the position of the medium being sealed.
The SC version does not incorporate an additional dust lip.
Primary sealing lip: Yes
Garter spring: Yes
Additional dust lip: No
This is an important identification feature when comparing single and double lip rotary shaft seals.
A seal with the same 60x90x10 mm dimensions but an additional dust lip represents a different sealing configuration.
The SC and AO/TC versions can have identical basic dimensions but different lip configurations.
SC: Single spring-loaded primary sealing lip without additional dust lip
AO/TC: Spring-loaded primary sealing lip plus additional dust lip
Therefore, matching 60x90x10 mm dimensions alone does not establish complete technical interchangeability.
The required lip configuration should be verified before selecting a replacement.
The 60x90x10 NBR SC oil seal is a radial sealing element for rotating shaft applications.
Nominal shaft diameter: 60 mm
Nominal housing diameter: 90 mm
Seal width: 10 mm
Material: NBR
Design: SC
Lip configuration: Single lip
The actual operating medium and service conditions should be checked for the specific machine or installation.
NBR is widely used in rotary shaft sealing systems involving compatible mineral oils and lubricating greases.
This does not mean that every NBR compound is universally compatible with every oil, fuel or technical fluid.
Before installation, verify:
Operating medium: To be verified
Compatibility with NBR: To be verified
Operating temperature: Dependent on the specific NBR compound
Actual service conditions: To be verified
Temperature, pressure and shaft speed limits from another manufacturer's 60x90x10 seal should not automatically be applied to this product.
When comparing replacement seals, verify:
Shaft diameter d: 60 mm
Outside diameter D: 90 mm
Width B: 10 mm
Material: NBR
Design: SC - single lip
Primary spring-loaded lip: Yes
Additional dust lip: No
Operating medium: To be verified
Actual operating conditions: To be verified
Matching the dimensions alone does not establish complete technical interchangeability.
60x90x10 NBR SC is a single lip radial shaft oil seal with a spring-loaded primary sealing lip.
Warehouse and Store: Lublin, Smoluchowskiego 1 Street, Building 4
Shipping: 24h
Stock location: Poland
Delivery area: Poland and EU countries
The dimensions are 60x90x10 mm: 60 mm shaft diameter, 90 mm outside diameter and 10 mm width.
The sealing material is NBR - Nitrile Butadiene Rubber.
Yes. The SC design is a single lip configuration.
Yes. The primary sealing lip is supported by a garter spring.
No. This SC configuration does not incorporate an additional dust lip.
No. SC is the single-lip version, while AO/TC incorporates an additional dust lip.
It specifies a 60 mm nominal shaft diameter, 90 mm outside diameter and 10 mm seal width.
SC identifies the single lip configuration used here, with a spring-loaded primary sealing lip and no additional dust lip.
Interchangeability should not be assumed solely from matching dimensions. The required lip configuration and operating conditions should be checked.
NBR is commonly used with many compatible mineral oils and lubricating greases. Exact compatibility depends on the specific NBR compound, medium, additives, temperature and service conditions.
No. Seals with the same dimensions may differ in material, lip configuration, construction and operating capabilities.
No. The 60x90x10 mm dimensions, NBR material, SC single lip construction and actual operating requirements should all be considered.
60x90x10 NBR SC is a single lip rotary shaft oil seal with a 60 mm shaft diameter, 90 mm outside diameter and 10 mm width. Manufactured from NBR, the SC configuration incorporates a spring-loaded primary sealing lip without an additional dust lip. It differs from an AO/TC double lip seal, which includes an additional dust lip. Correct replacement selection should consider the dimensions, NBR material and SC single lip construction.
Data sheet
You might also like
60x90x10 NBR SC Single Lip Oil Seal. Shaft diameter: 60 mm. Outside diameter: 90 mm. Width: 10 mm. Material: NBR. Design: SC - single lip. Primary sealing lip: Spring-loaded. Additional dust lip: No. Radial shaft seal for rotating shaft applications.
Warehouse and Store: Lublin, Smoluchowskiego 1 Street, Building 4.
24h Shipping. Available from stock in Poland for delivery across the EU.
