GRN® 130x160x14 mm NBR AO/ TC is a double-lip radial shaft oil seal designed for lubricant retention and protection against external contamination. The AO/ TC construction features a spring-loaded primary sealing lip and an additional dust exclusion lip. Dimensions: 130 mm inner diameter, 160 mm outer diameter and 14 mm width. NBR material offers resistance to many mineral oils and greases. Available through the specialist B2B platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Brand |
GRN® |
|
Product type |
Radial shaft oil seal |
|
Design designation |
AO/ TC |
|
Inner diameter (d) |
130 mm |
|
Outer diameter (D) |
160 mm |
|
Width (B) |
14 mm |
|
Nominal dimensions |
130x160x14 mm |
|
Elastomer material |
NBR - Nitrile Butadiene Rubber |
|
Seal construction |
Double-lip |
|
Primary sealing lip |
Spring-loaded |
|
Secondary lip |
Dust exclusion lip |
|
Sealing principle |
Radial contact sealing |
|
Intended function |
Rotary shaft sealing |
The complete product designation identifies the seal's dimensions, material and construction.
130 - Nominal shaft diameter of 130 mm.
160 - Nominal housing bore diameter of 160 mm.
14 - Nominal axial seal width of 14 mm.
NBR - Nitrile butadiene rubber, an elastomer commonly used in sealing applications involving mineral oils and greases.
AO/ TC - Double-lip construction featuring a spring-loaded primary sealing lip and an additional dust exclusion lip.
GRN® - Product brand.
When selecting a replacement seal, the complete designation should be checked. Products with identical dimensions may differ in elastomer material, sealing lip configuration and construction.
The GRN® 130x160x14 NBR AO/ TC features a double-lip radial shaft sealing design.
Its primary purpose is to retain lubricants within a rotating mechanical assembly while providing an additional barrier against external contamination.
The primary sealing lip, manufactured from NBR elastomer, operates in direct contact with the rotating shaft surface.
A garter spring helps maintain radial contact pressure between the sealing lip and the shaft, reducing oil or grease leakage from the sealed assembly.
Proper sealing performance depends on:
Suitable shaft surface condition
Correct installation procedures
Compatibility between NBR and the operating medium
Appropriate lubrication
Operating conditions within the seal's permissible limits
The second sealing lip acts as an additional barrier between the surrounding environment and the primary sealing lip.
It helps limit the entry of:
Dust and airborne particles
Fine dirt and debris
Contaminants generated during machinery operation
The additional dust exclusion lip does not automatically guarantee resistance to pressurized water or continuous liquid immersion.
NBR, or nitrile butadiene rubber, is widely used in radial shaft oil seals due to its mechanical properties and compatibility with many industrial lubricants.
Good resistance to many mineral-based oils
Compatibility with numerous industrial greases
Elasticity suitable for contact sealing applications
Wear resistance under appropriate operating conditions
Suitability for various industrial mechanical systems
NBR is not universally compatible with all chemicals and operating fluids. Material suitability depends on the composition of the medium, temperature and operating conditions.
Exact permissible temperature, pressure and rotational speed limits for this GRN® seal require confirmation from the relevant technical documentation.
Double-lip radial shaft oil seals are commonly used in machinery requiring lubricant retention and additional protection against external contamination.
Typical applications for this sealing design include:
Industrial gearboxes
Rotating shafts in industrial machinery
Mechanical drive assemblies
Bearing housings and bearing assemblies
Oil- and grease-lubricated systems
Machinery operating in dusty environments
These examples describe general applications of AO/ TC radial shaft seals and do not represent confirmed compatibility with specific machinery models or OEM part numbers.
|
Feature |
AO/ TC |
A/ SC |
|---|---|---|
|
Seal construction |
Double-lip |
Single-lip |
|
Primary sealing lip |
Yes |
Yes |
|
Garter spring |
Yes |
Yes |
|
Additional dust exclusion lip |
Yes |
No |
|
Primary function |
Oil and grease retention with additional dust exclusion |
Oil and grease retention |
|
Protection against contamination |
Additional barrier |
Basic |
The main difference: The AO/ TC oil seal incorporates an additional dust exclusion lip that is not present in the A/ SC single-lip construction.
Seals with identical nominal dimensions are not necessarily interchangeable. Equipment design and operating requirements must be considered before substitution.
Before purchasing, verify the following parameters:
Shaft diameter: 130 mm.
Housing bore diameter: 160 mm.
Installation width: 14 mm.
Seal construction: AO/ TC - double-lip.
Elastomer material: NBR.
Operating medium: Oil, grease or another fluid compatible with NBR.
Operating conditions: Temperature, rotational speed and environmental contamination.
Particular attention should be paid to the 14 mm width. The GRN® 130x160x14 seal should not automatically be replaced with a 130x160x15 version without confirming compatibility with the equipment design.
Correct installation is essential for maintaining sealing performance and service life.
Thoroughly clean the shaft and housing bore before installation.
Inspect the shaft surface for scratches, grooves and other damage.
Remove burrs and sharp edges that could damage the sealing lips.
Protect both sealing lips during installation.
Apply a suitable assembly lubricant compatible with NBR.
Press the seal evenly into the housing using an appropriate installation tool.
In standard applications, position the spring-loaded primary sealing lip toward the sealed medium unless the equipment documentation specifies otherwise.
Incorrect installation may cause premature sealing lip wear and lubricant leakage.
What are the dimensions of the GRN® 130x160x14 AO/ TC oil seal?
The seal has an inner diameter of 130 mm, an outer diameter of 160 mm and a width of 14 mm. Its complete dimensional designation is 130x160x14 mm.
What does AO/ TC mean on a rotary shaft oil seal?
AO/ TC identifies a double-lip radial shaft oil seal with a spring-loaded primary sealing lip and an additional dust exclusion lip.
Is the GRN® 130x160x14 AO/ TC a double-lip seal?
Yes. It features a primary sealing lip for lubricant retention and an additional lip designed to limit the entry of external contaminants.
Is NBR suitable for mineral oil sealing applications?
Yes. NBR generally provides good resistance to many mineral oils and greases. Compatibility with the specific lubricant should still be verified.
What is the difference between AO/ TC and A/ SC?
AO/ TC incorporates an additional dust exclusion lip, while A/ SC is a single-lip construction without this additional barrier.
Can a 130x160x14 oil seal be replaced with a 130x160x15 version?
Not automatically. The 1 mm difference in width may affect installation depth and the position of the sealing lip on the shaft. Compatibility must be verified before substitution.
Which direction should a double-lip rotary shaft oil seal face during installation?
In standard applications, the spring-loaded primary sealing lip should face the oil, grease or other sealed medium unless the equipment manufacturer specifies otherwise.
Are the dimensions 130x160x14 sufficient to select a replacement oil seal?
No. The NBR material, AO/ TC construction and equipment operating requirements must also be considered.
GRN® 130x160x14 NBR AO/ TC is a double-lip radial shaft oil seal with nominal dimensions of 130x160x14 mm. It features a spring-loaded primary sealing lip and an additional dust exclusion lip. The NBR elastomer offers resistance to many mineral oils and greases. The seal helps retain lubricants and limit external contamination in rotating mechanical assemblies.
The GRN® oil seal is available through the specialist B2B trading platform simmering.pl, with worldwide shipping from stock in Poland.
Data sheet
You might also like