Bearing Ball 35.00 mm - Spherical Rolling Element for Ball Bearings

Product Characteristics - Bearing Ball 35.00 mm

A bearing ball with a nominal diameter of 35.00 mm is an individual rolling element used in mechanical assemblies where loads are transmitted through spherical rolling contact.

In a complete ball bearing, rolling elements operate between the inner and outer ring raceways, allowing relative rotational movement while reducing sliding friction.

The operating characteristics of a bearing ball depend not only on its nominal diameter but also on manufacturing accuracy, sphericity, hardness, material composition and surface quality.

Matching nominal diameters alone does not guarantee interchangeability with the original rolling element.

Technical Specifications

The material grade, precision grade, hardness, diameter tolerance and surface roughness have not been confirmed.

The ball must not automatically be identified as 100Cr6, AISI 52100 or assigned a specific precision grade without manufacturer documentation.

What Does Bearing Ball 35.00 mm Mean?

Bearing Ball identifies a spherical rolling element designed to operate against appropriately shaped rolling surfaces.

35.00 mm specifies the nominal diameter of the ball.

Unlike a complete rolling bearing, an individual bearing ball does not include inner or outer rings, a cage, seals or an internal clearance designation.

The nominal diameter does not establish the manufacturing tolerance, precision grade, material or hardness.

Construction and Operating Principle

The 35.00 mm bearing ball has a spherical working surface that interacts with a raceway or another guiding surface in a suitably designed mechanical assembly.

In ball bearings, rolling elements enable relative rotation between the bearing rings while transmitting loads through rolling contact.

Depending on the construction of the complete bearing, the balls may carry radial, axial or combined loads.

Operating performance depends on:

• Diameter accuracy and dimensional tolerance.

• Sphericity and geometrical deviations.

• Material hardness and mechanical properties.

• Surface finish and surface integrity.

• Raceway geometry.

• Lubrication and operating loads.

Incorrect selection may cause increased contact stresses, uneven load distribution and premature wear of the bearing assembly.

Bearing Ball Precision Grades

ISO 3290-1:2014 specifies requirements for finished steel balls used in rolling bearings, including geometrical accuracy and surface quality.

Examples of bearing ball precision grades include G10, G20, G40 and G100.

In general, lower grade numbers correspond to tighter geometrical tolerances.

No specific precision grade has been confirmed for the 35.00 mm bearing ball. Therefore, tolerances associated with a particular G grade must not be assigned to this product without supporting documentation.

Alternative Designations and Reference Formats

The product may be identified using the following natural designation formats:

• Bearing Ball 35.00 mm

• 35 mm Bearing Ball

• Ball Bearing Rolling Element 35 mm

• Spherical Bearing Ball Diameter 35 mm

No manufacturer catalogue number, verified OEM reference or confirmed replacement designation has been provided.

Bearing Ball Selection and Interchangeability

Before purchasing a 35.00 mm bearing ball, verify the nominal diameter, dimensional tolerance, material, hardness, precision grade and requirements of the intended mechanical assembly.

When replacing a rolling element in an existing bearing, the specifications of the original balls and the condition of the raceways must also be considered.

Replacing an individual ball in a complete bearing is generally not a standard repair procedure. Differences in diameter and wear of the remaining components can cause uneven load distribution.

In many applications, replacing the complete bearing is the more appropriate solution.

Applications of Bearing Ball 35.00 mm

A bearing ball with a nominal diameter of 35 mm may be used as a rolling element in suitably designed ball bearings and other mechanisms requiring spherical rolling contact.

Its suitability depends on the required precision, material properties, operating loads and working conditions.

No specific bearing model, machine or equipment application has been verified for this exact product.

Handling, Installation and Storage

Protect the spherical working surface against impacts, scratches and contamination.

Before installation, inspect the ball for surface damage and verify dimensional and material compatibility with the mechanical assembly.

Do not install rolling elements showing visible dents, corrosion or other surface defects.

Store the product in a clean, dry environment, protected from moisture and mechanical damage.

Frequently Asked Questions - FAQ

What is the diameter of Bearing Ball 35.00 mm?

The nominal diameter is 35.00 mm. Actual dimensional tolerances depend on the manufacturer's specification.

Is the 35 mm bearing ball made from 100Cr6 bearing steel?

This cannot be confirmed without material documentation. The designation "bearing ball" alone does not identify the steel grade.

What precision grade does the 35 mm bearing ball have?

The precision grade has not been specified and must be verified using manufacturer documentation.

Can a 35 mm ball be used in any bearing with balls of the same diameter?

No. Diameter tolerance, sphericity, material, hardness and operating requirements must also be compatible.

Can an individual bearing ball be replaced in an existing bearing?

This is generally not a recommended repair procedure for conventional complete rolling bearings. Replacing the entire bearing is often preferable.

Is the 35 mm bearing ball corrosion-resistant?

Corrosion resistance depends on the material grade and any applicable surface treatment. It has not been confirmed for this product.

How is bearing ball precision measured?

Precision assessment requires suitable measuring equipment and procedures for checking diameter, sphericity and surface quality. A standard vernier caliper is insufficient to establish the precision grade.

Bearing Ball 35.00 mm - Key Technical Information

Bearing Ball 35.00 mm is an individual spherical rolling element with a nominal diameter of 35 mm. It can operate against the raceways of suitably designed ball bearings. The manufacturer, material, hardness and precision grade are unspecified. Correct selection requires verification of diameter tolerance, sphericity, material properties and the requirements of the intended mechanical assembly.

Bearing Balls at simmering.pl

Bearing balls and other industrial components are available through simmering.pl, a specialist supplier of rolling bearings, industrial seals and mechanical components.

We serve industrial customers, workshops, maintenance departments and technical purchasing teams.

Our warehouse and order processing facilities are located in Lublin, Poland. We provide worldwide shipping from stock in Poland.