Simrit 50x70x10 BAUMSLX7 FKM/FPM double-lip rotary shaft oil seal by Freudenberg Simrit. Manufactured from fluorocarbon rubber, offering very good resistance to many oils, greases, fuels and elevated temperatures. The BAUMSLX7 construction features a primary sealing lip, an additional dust exclusion lip and a profiled rubber-covered outer diameter. Dimensions: 50 mm shaft diameter, 70 mm housing bore and 10 mm width. Designed for appropriately specified industrial applications. Available through the specialist B2B industrial supply platform simmering.pl. Worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Brand |
SIMRIT® |
|
Manufacturer / Group |
Freudenberg Sealing Technologies |
|
Product type |
Radial rotary shaft oil seal |
|
Technical designation |
Simmerring / Rotary Shaft Oil Seal |
|
Product designation |
50x70x10 BAUMSLX7 FKM/FPM |
|
Inner diameter (d) |
50 mm |
|
Outer diameter (D) |
70 mm |
|
Width (B) |
10 mm |
|
Sealing material |
FKM / FPM |
|
Elastomer family |
Fluorocarbon rubber / Fluoroelastomer |
|
Construction profile |
BAUMSLX7 |
|
Number of lips |
2 |
|
Primary sealing lip |
Yes |
|
Additional dust exclusion lip |
Yes |
|
Garter spring |
Yes, in the standard construction |
|
Outer surface |
Profiled, rubber-covered |
|
Structural reinforcement |
Metal reinforcing insert |
|
Sealing principle |
Dynamic, contact-type sealing |
|
Construction classification |
Corresponds to the AS-type family |
|
Nominal radial cross-section |
10 mm |
|
Permissible operating pressure |
Application-dependent; up to 0.05 MPa specified for the standard construction family |
|
Operating temperature range |
Depends on the specific FKM compound |
|
Maximum rotational speed |
Not confirmed for this variant |
|
Hydrodynamic directionality |
Not confirmed |
|
Freudenberg article number |
Not confirmed |
|
EAN |
Not confirmed |
Technical note: FKM/FPM is the material associated with the catalogued BAUMSLX7 construction family. The exact operating parameters, elastomer compound and manufacturer article number for the 50x70x10 version require confirmation from the relevant Freudenberg technical documentation.
|
Designation |
Meaning |
|---|---|
|
SIMRIT |
Freudenberg technical sealing brand |
|
50 |
Nominal shaft diameter: 50 mm |
|
70 |
Nominal housing bore diameter: 70 mm |
|
10 |
Nominal oil seal width: 10 mm |
|
BAUMSLX7 |
Specific radial rotary shaft oil seal construction profile |
|
SL |
Additional protective dust exclusion lip |
|
X7 |
Designation identifying a particular profile version |
|
FKM |
Fluorocarbon rubber material designation |
|
FPM |
Alternative designation for fluorocarbon rubber |
Yes. FKM and FPM are designations used for the fluorocarbon elastomer family.
These materials are widely used in sealing applications involving oils, greases and numerous chemical substances.
However, not all FKM/FPM compounds have identical properties.
Individual grades may differ in:
Hardness.
Resistance to specific operating media.
Low-temperature flexibility.
Elevated-temperature resistance.
Mechanical properties.
Long-term ageing resistance.
The BAUMSLX7 profile is a radial rotary shaft oil seal construction designed to reduce leakage of an operating medium while providing additional protection against contamination.
The primary sealing lip operates directly against the rotating shaft surface.
Its function is to reduce leakage of a compatible lubricant.
In the standard construction, contact pressure is supported by a circumferential garter spring.
Sealing effectiveness depends on:
Shaft rotational speed.
Quality of the shaft contact surface.
Operating temperature.
Operating medium.
Lubrication conditions.
Correct installation.
The SL designation identifies an additional protective lip.
It helps reduce the entry of:
Dust.
Industrial airborne particles.
Fine solid contaminants.
Contamination originating from the surrounding equipment environment.
The additional dust exclusion lip is not a second identical pressure-retaining seal.
It also does not guarantee sealing during immersion or exposure to pressurized water.
One of the characteristic features of BAUMSLX7 construction is its profiled elastomer-covered outer surface.
Its purpose is to support static sealing between the oil seal and the housing bore.
The profiled surface may contribute to sealing effectiveness at the housing interface, but it still requires a properly prepared bore with suitable dimensional tolerances.
An internal metal reinforcing element provides structural stability.
It helps maintain the correct geometry and rigidity of the oil seal during installation and operation.
The exact metal grades used for the reinforcing insert and spring depend on the manufacturer's specific version.
FKM/FPM is a technical elastomer used in demanding industrial sealing applications.
Compared with many conventional NBR compounds, it generally offers better elevated-temperature resistance and broader compatibility with selected chemical media.
Fluorocarbon rubber is widely used in sealing applications requiring thermal resistance.
In many applications, FKM compounds can operate at higher temperatures than conventional NBR materials.
However, the exact operating temperature range of Simrit 50x70x10 BAUMSLX7 depends on the specific FKM compound and service conditions.
In dynamic rotary shaft sealing, the temperature generated at the sealing lip contact area must also be considered.
FKM/FPM provides very good resistance to many mineral oils and selected synthetic lubricants.
It may be suitable for appropriately specified systems using:
Gear oils.
Lubricating oils.
Selected hydraulic oils.
Industrial greases.
Certain synthetic lubricants.
Compatibility with a particular operating medium depends on its chemical composition and additives.
Many FKM compounds provide favorable resistance to fuels and hydrocarbon-based substances.
However, this does not mean universal compatibility with every fuel formulation or additive.
FKM/FPM provides very good resistance to:
Ozone.
Oxidation.
Atmospheric ageing.
Various environmental influences.
These properties help preserve material performance under appropriately specified operating conditions.
Fluorocarbon elastomers can provide good wear resistance in dynamic sealing applications.
Actual service life depends on the compound, shaft surface quality, lubrication and operating temperature.
FKM/FPM is not a universal sealing material.
Conventional FKM compounds may exhibit lower flexibility at low temperatures than certain VMQ silicone rubber compounds.
Special FKM grades with improved low-temperature properties are available, but their performance should not be attributed to every fluorocarbon oil seal.
Certain ketones, esters, amines and other chemicals may be incompatible with specific FKM compounds.
Resistance to the actual operating medium must be verified before installation.
Even an FKM rotary shaft oil seal may experience accelerated wear when lubrication is insufficient.
High elastomer temperature resistance does not automatically permit operation at any rotational speed.
Dynamic operating conditions, friction and heat dissipation must also be considered.
|
Parameter |
Value |
|---|---|
|
Nominal shaft diameter |
50 mm |
|
Nominal housing bore diameter |
70 mm |
|
Nominal axial width |
10 mm |
|
Difference between diameters D-d |
20 mm |
|
Nominal radial cross-sectional thickness |
10 mm |
The oil seal is designed for a nominal shaft diameter of 50 mm and a housing bore diameter of 70 mm.
Its axial width is 10 mm.
Incorrect selection may cause:
Improper seating in the housing bore.
Leakage at the static sealing interface.
Incorrect sealing lip contact with the shaft.
Excessive friction.
Lubricant leakage.
Premature wear.
Damage during installation.
No.
Oil seals with identical dimensions may differ in sealing material, lip construction, outer surface profile and permissible operating parameters.
For BAUMSLX7, the complete construction designation must be considered.
The oil seal may be used in appropriately specified mechanisms with rotating shafts.
FKM/FPM may be suitable for sealing selected gearboxes containing compatible lubricating oils.
The radial sealing construction may be used in mechanisms requiring the reduction of lubricant leakage.
FKM/FPM may provide better thermal performance than conventional NBR compounds.
However, selection requires confirmation of the operating parameters of the specific oil seal.
The additional SL lip helps protect the primary sealing area against external contamination.
The oil seal may be considered as a replacement component in equipment requiring a compatible BAUMSLX7 profile.
Important: These are general application areas associated with the construction and material. They do not represent a verified list of specific machines compatible with Simrit 50x70x10 BAUMSLX7.
|
Property |
FKM/FPM |
NBR |
VMQ/MVQ |
|---|---|---|---|
|
Resistance to many mineral oils |
Very good |
Good |
Medium-dependent |
|
Elevated-temperature resistance |
Very good |
Generally lower |
Very good |
|
Low-temperature flexibility |
Compound-dependent |
Compound-dependent |
Excellent |
|
Ozone resistance |
Very good |
Generally limited |
Excellent |
|
Atmospheric ageing resistance |
Very good |
Generally lower |
Excellent |
|
Abrasion resistance |
Generally favorable |
Generally favorable |
Generally lower |
|
Fuel resistance |
Generally favorable |
Fuel-dependent |
Often limited |
|
Chemical resistance |
Medium-dependent |
Medium-dependent |
Medium-dependent |
FKM/FPM is frequently selected for more demanding thermal and chemical applications.
NBR remains a popular material for conventional oil sealing because of its favorable mechanical properties and resistance to many mineral oils.
However, NBR should not automatically be replaced with FKM without verifying operating conditions.
FKM/FPM offers favorable resistance to many oils, fuels and elevated temperatures.
VMQ may be more suitable for selected applications requiring low-temperature flexibility.
The correct choice depends on the operating medium, shaft speed, temperature and mechanical requirements.
|
Parameter |
BAUMSLX7 |
BAUSLX2 |
|---|---|---|
|
Brand |
Simrit |
Simrit |
|
Sealing type |
Radial rotary shaft |
Radial rotary shaft |
|
Primary sealing lip |
Yes |
Yes |
|
Additional dust exclusion lip |
Yes |
Yes |
|
Outer surface |
Profiled |
Smooth |
|
Material of compared versions |
FKM/FPM |
NBR |
|
Metal reinforcement |
Yes |
Yes |
|
Primary lip garter spring |
Yes |
Yes |
|
Direct interchangeability |
Requires verification |
Requires verification |
Differences in material and construction may affect installation behavior and operating performance.
|
Parameter |
Simrit BAUMSLX7 |
GRN AO/TC |
|---|---|---|
|
Dimensions |
50x70x10 mm |
50x70x10 mm |
|
Material |
FKM/FPM |
VMQ/MVQ |
|
Construction |
Double lip |
Double lip |
|
Dust exclusion lip |
Yes |
Yes |
|
Outer surface |
Profiled |
Rubber-covered |
|
Resistance to many oils |
Very good |
Medium-dependent |
|
Low-temperature flexibility |
Compound-dependent |
Generally better |
|
Elevated-temperature resistance |
Very good |
Very good |
|
Direct interchangeability |
Not confirmed |
Not confirmed |
Conclusion: Despite identical dimensions and double-lip construction, these products differ in sealing material and outer surface profile.
Direct interchangeability should not be claimed without technical verification.
Before purchasing, verify:
Shaft diameter: 50 mm.
Housing bore diameter: 70 mm.
Width: 10 mm.
Construction profile: BAUMSLX7.
Material: FKM/FPM.
Additional dust exclusion lip: Yes.
Operating medium: Compatibility with FKM.
Operating temperature: Suitability for the specific elastomer compound.
Rotational speed: Within the permissible limits of the construction.
Operating pressure: Compatible with the sealing specifications.
Shaft and housing condition: Appropriate surface quality.
Equipment manufacturer requirements: Compatibility with the original component.
A replacement should not be selected solely on the basis of the 50x70x10 mm dimensions.
Correct installation is essential for sealing durability and effectiveness.
Thoroughly clean the shaft and housing bore.
Inspect the shaft surface for damage.
Remove burrs and sharp edges.
Use appropriate protective installation sleeves.
Protect both sealing lips from damage.
Press the oil seal into position evenly.
Avoid tilting the sealing ring.
Maintain the correct orientation relative to the operating medium.
Use an installation lubricant compatible with FKM.
Inspect sealing performance after startup.
Particular attention should be paid to correctly seating the profiled outer surface in the housing bore.
The oil seal has an inner diameter of 50 mm, an outer diameter of 70 mm and a width of 10 mm.
BAUMSLX7 is a radial rotary shaft oil seal construction profile featuring an additional dust exclusion lip and a profiled outer surface.
The described material version uses FKM/FPM, a fluorocarbon rubber offering very good resistance to many oils, fuels and elevated temperatures.
Yes. Both designations refer to the fluorocarbon elastomer family used in technical sealing applications.
Yes. The construction incorporates a primary sealing lip and an additional dust exclusion lip.
FKM/FPM offers favorable elevated-temperature resistance, but the exact operating temperature range depends on the compound and service conditions.
Not automatically. The sealing material, lip geometry, outer surface construction and equipment requirements must be verified.
No. Identical dimensions do not guarantee material or construction compatibility.
Simrit 50x70x10 BAUMSLX7 FKM/FPM is a double-lip radial rotary shaft oil seal featuring an additional dust exclusion lip and a profiled rubber-covered outer diameter. Fluorocarbon rubber provides very good resistance to many oils, fuels and elevated temperatures. Correct selection requires verification of operating medium compatibility, service parameters and construction compatibility with the original seal.
The Simrit 50x70x10 BAUMSLX7 FKM/FPM rotary shaft oil seal combines the properties of fluorocarbon rubber with a double-lip radial sealing construction.
The primary sealing lip helps reduce leakage of a compatible lubricant, while the additional dust exclusion lip provides supplementary protection against contamination.
The profiled outer diameter is a characteristic feature of BAUMSLX7 construction.
The specialist B2B industrial supply platform simmering.pl offers Simrit sealing solutions for professional industrial procurement, gearbox maintenance and machinery repair.
Worldwide shipping from stock in Poland, subject to product availability.
Data sheet