CRAFT 72200C/72487 50.8x123.825x36.512 mm - Tapered Roller Bearing
search
  • CRAFT 72200C/72487 50.8x123.825x36.512 mm - Tapered Roller Bearing

CRAFT 72200C/72487 50.8x123.825x36.512 mm - Tapered Roller Bearing

Processing time: 2-3 days
€27.73 (net)
Price for: 1pcs.

CRAFT 72200C/72487 50.8x123.825x36.512 mm single-row inch-series tapered roller bearing. Inside diameter 50.8 mm (2″), outside diameter 123.825 mm (4.875″), overall width 36.512 mm. Separable construction with 72200C inner assembly and 72487 outer ring. Accommodates radial and unidirectional axial loads. Axial clearance can be adjusted within a suitable bearing arrangement. Specialist B2B industrial trading platform simmering.pl, with worldwide shipping from stock in Poland.

Quantity

Technical Specifications

Parameter

Specification

Brand

CRAFT

Full designation

72200C/72487

Bearing type

Tapered roller bearing

Construction

Single-row

Dimensional system

Inch series

Inside diameter (d)

50.8 mm

Outside diameter (D)

123.825 mm

Overall width (T)

36.512 mm

Bore diameter in inches

2″

Outside diameter in inches

4.875″

Rolling elements

Tapered rollers

Design

Separable

Radial load capacity

Yes

Axial load direction

Unidirectional

Sealing arrangement

Open construction

Lubrication

Oil or grease, depending on application

Nominal dimensions

50.8x123.825x36.512 mm

Important: The dimensions identify the product specified in the request. The individual ring widths B and C, basic dynamic and static load ratings, fatigue load limit, bearing weight, cage material and permissible rotational speeds must be confirmed using the manufacturer's technical documentation for the exact 72200C/72487 bearing set.

Understanding the CRAFT 72200C/72487 Designation

In inch-series tapered roller bearings, the inner and outer ring components are frequently identified by separate reference numbers.

Designation element

Meaning

72200C

Inner ring assembly with tapered rollers and cage

/

Separator between the two mating bearing components

72487

Outer ring designation

CRAFT

Bearing brand

Designation 72200C

The designation 72200C identifies the inner bearing assembly, consisting of the inner ring, tapered rollers and cage.

The letter C is an integral part of the designation. It must not be omitted or automatically interpreted as an internal clearance class, cage material or precision class.

Designation 72487

The designation 72487 identifies the outer ring designed to operate with the corresponding inner assembly.

When purchasing a complete bearing, verify that both components are included.

Why Is the Complete Designation Important?

For inch-series tapered roller bearings, the bore and outside diameters alone are insufficient to establish interchangeability.

Raceway geometry, contact angles, individual ring widths and inner assembly construction must also be considered.

Therefore, the complete designation 72200C/72487 should always be retained.

CRAFT 72200C/72487 Bearing Construction

Inner Ring - Cone

The inner ring assembly has a nominal bore diameter of 50.8 mm, equivalent to 2 inches.

Tapered rollers operate on the conical inner ring raceway, transmitting loads between the inner and outer rings.

This component is commonly referred to as the cone assembly.

Outer Ring - Cup

The outer ring has a nominal outside diameter of 123.825 mm, equivalent to 4.875 inches.

It is a separate bearing component with a raceway designed to operate with the tapered rollers.

In technical terminology, the outer ring is referred to as the cup.

Tapered Rollers

The rolling elements have a tapered geometry and operate between appropriately inclined raceways.

This design enables the bearing to accommodate combined radial and axial loads.

Unlike ball bearings, which feature idealised point contact, tapered roller bearings transmit loads through line contact between the rolling elements and raceways.

Cage

The cage maintains appropriate spacing between the tapered rollers and supports their guidance during operation.

A specific cage material should not be assigned to this bearing without confirmation from CRAFT technical documentation.

Separable Construction

The bearing consists of two principal components:

  • Inner assembly 72200C.

  • Outer ring 72487.

The separable construction facilitates installation in appropriately designed mechanical assemblies.

However, it does not mean that components from different manufacturers can be combined indiscriminately.

Metric and Inch Dimensions

The 72200C/72487 designation belongs to a tapered roller bearing family with dimensions originating from the imperial measurement system.

Parameter

Millimetres

Inches

Inside diameter (d)

50.8 mm

2″

Outside diameter (D)

123.825 mm

4.875″

Overall width (T)

36.512 mm

Approx. 1.4375″

The inch values help identify mounting dimensions, but replacement bearing selection must be based on the complete designation and technical documentation.

Importance of Overall Width

The overall width T = 36.512 mm represents the total axial dimension of the assembled bearing.

It must not automatically be treated as the inner ring width B or outer ring width C.

These three dimensions may differ and are important for the axial positioning of the complete bearing arrangement.

Radial and Axial Loads

Radial Loads

CRAFT 72200C/72487 is designed to accommodate loads acting perpendicular to the shaft axis.

Line contact between the tapered rollers and raceways distributes the load along the contact zone.

Actual load capacity depends on internal geometry, materials, manufacturing quality and operating conditions.

Axial Loads

A single-row tapered roller bearing accommodates axial loads in one direction.

If the assembly requires axial shaft location in both directions, two tapered roller bearings are frequently arranged in opposition.

Internal Axial Force Component

In a tapered roller bearing, radial loading also generates an internal axial force component.

This force must be considered when designing the bearing arrangement, particularly when the bearing operates together with another tapered roller bearing.

Dynamic and Static Load Ratings

Correct bearing selection requires consideration of:

  • Basic dynamic load rating C.

  • Basic static load rating C0.

  • Equivalent bearing load.

  • Required bearing life.

  • Rotational speed.

  • Lubrication conditions.

Load ratings from similarly sized bearings of other brands should not be assigned to this product without confirming technical equivalence.

Axial Clearance and Preload

Clearance Adjustment

Tapered roller bearings can operate in arrangements that allow axial clearance adjustment.

Adjustment is achieved through appropriate positioning of the bearing rings, spacers or adjusting nuts.

Excessive clearance may cause increased shaft displacement, vibration and uneven load distribution.

Preload

Preload can increase bearing arrangement rigidity and reduce unwanted displacement.

However, excessive preload increases friction and operating temperature and may accelerate wear of the raceways and rolling elements.

Adjustment values should be determined from the technical documentation of the specific machine.

Lubrication and Operating Conditions

Open Construction

CRAFT 72200C/72487 features an open construction.

Protection against moisture, dust and other contaminants should be provided by an appropriately designed sealing arrangement in the surrounding equipment.

Oil Lubrication

Tapered roller bearings frequently operate with oil lubrication in gearboxes and power transmission assemblies.

Adequate lubricant supply must be maintained at the contact areas between the rollers and raceways.

Grease Lubrication

Grease lubrication is possible in suitable applications.

Grease selection should consider loading, temperature, rotational speed and sealing arrangements.

Rotational Speed and Temperature

Permissible rotational speed depends on bearing construction, lubrication, applied loads, operating clearance and heat dissipation.

It must not be determined solely from the nominal dimensions of 50.8x123.825x36.512 mm.

Alternative Designations and Reference Numbers

The following designation variations may appear in technical documentation, catalogues and search results:

  • CRAFT 72200C/72487

  • 72200C/72487 CRAFT

  • 72200C 72487

  • 72200C/72487 50.8x123.825x36.512

  • CRAFT 72200C/72487 tapered roller bearing

  • Tapered roller bearing 50.8x123.825x36.512

  • 72200C/72487 inch-series tapered roller bearing

The primary product identifier remains the complete designation 72200C/72487.

Equivalent Bearings from Other Manufacturers

For inch-series tapered roller bearings, replacement identification should begin with the designations of both mating components.

Component

Reference designation

Inner ring assembly

72200C

Outer ring

72487

Complete bearing set

72200C/72487

When comparing products from TIMKEN, SKF, NTN, KOYO or other manufacturers, verify the availability of the exact cone-and-cup combination and the compatibility of the catalogue specifications.

Bearings with similar dimensions should not be considered fully interchangeable without confirming their construction.

CRAFT 72200C/72487 vs Metric Tapered Roller Bearings

CRAFT 72200C/72487 has characteristic inch-series dimensions that do not directly correspond to the standard dimensions of common metric tapered roller bearing series such as 302, 322 or 320.

Feature

CRAFT 72200C/72487

Typical metric tapered roller bearing

Dimensional system

Inch series

Metric

Bore diameter

50.8 mm

Depends on size

Outside diameter

123.825 mm

Depends on size

Overall width

36.512 mm

Depends on size

Designation

Two reference numbers separated by a slash

Usually one basic designation

Construction

Separable

Usually separable

Interchangeability

Requires verification of the complete bearing set

Requires dimensional and technical compatibility

Why Is the 50.8 mm Bore Diameter Important?

A bore diameter of 50.8 mm corresponds exactly to 2 inches.

It is not equivalent to the 50 mm or 55 mm bore diameters commonly found in metric bearing series.

The 0.8 mm difference compared with a 50 mm bore prevents direct substitution without changing the mounting arrangement.

Why Is the 123.825 mm Outside Diameter Important?

An outside diameter of 123.825 mm corresponds to 4.875 inches.

It must not be rounded to 124 mm or replaced with a bearing having a 125 mm outside diameter.

Dimensional accuracy is essential for the correct fit of the outer ring in the housing.

Selection and Interchangeability of CRAFT 72200C/72487

Before purchasing or installing the bearing, verify:

  • Complete designation 72200C/72487.

  • Inner assembly designation 72200C.

  • Outer ring designation 72487.

  • Shaft diameter of 50.8 mm.

  • Housing bore diameter of 123.825 mm.

  • Overall width of 36.512 mm.

  • Individual ring widths B and C.

  • Required dynamic and static load ratings.

  • Direction and magnitude of applied loads.

  • Required axial clearance or preload.

  • Rotational speed and operating temperature.

  • Lubrication method.

  • Axial shoulder dimensions.

  • Mounting fit and precision requirements.

Matching external dimensions alone does not establish interchangeability. Compatibility of the internal geometry and both mating bearing components is particularly important.

CRAFT 72200C/72487 Bearing Applications

Inch-series tapered roller bearings are used in mechanical assemblies requiring combined radial and axial load capacity.

Typical applications for this bearing construction include:

  • Mechanical gearboxes.

  • Power transmission assemblies.

  • Differential mechanisms.

  • Axle assemblies in vehicles and machinery.

  • Agricultural machinery.

  • Construction equipment.

  • Industrial shaft assemblies.

  • Mechanisms requiring axial clearance adjustment.

These applications are characteristic of tapered roller bearing construction. They do not represent a confirmed list of equipment fitted with the specific CRAFT 72200C/72487 bearing set.

Installation and Operation

Mounting Surface Preparation

Before installation, inspect the shaft, housing and axial locating surfaces.

Particular attention must be paid to the inch-series mounting dimensions. Interference fits must not be selected using rounded metric values.

Inner Assembly Installation

The 72200C inner assembly must be installed according to the required mounting fit.

When an interference fit is used, mounting force must be applied directly to the inner ring.

Installation force must never be transmitted through the tapered rollers.

Outer Ring Installation

The 72487 outer ring must be correctly seated in the housing bore.

Adequate support and correct alignment must be maintained.

Axial Clearance Adjustment

After installation, axial clearance or preload must be adjusted according to the equipment manufacturer's specifications.

Incorrect adjustment may cause increased temperature, vibration, friction and premature wear.

Operating Condition Monitoring

During operation, bearing temperature, noise, vibration and lubrication condition should be monitored.

Unusual symptoms may indicate incorrect installation, improper clearance, contamination or lubrication problems.

FAQ - Frequently Asked Questions

What are the dimensions of CRAFT 72200C/72487?

The nominal dimensions are 50.8x123.825x36.512 mm. The inside diameter is 50.8 mm, outside diameter is 123.825 mm and overall width is 36.512 mm.

Is CRAFT 72200C/72487 an inch-series bearing?

Yes. The bore diameter corresponds to 2 inches, while the outside diameter is 4.875 inches.

What do the 72200C and 72487 designations mean?

72200C identifies the inner ring assembly with tapered rollers and cage, while 72487 identifies the outer ring.

Is CRAFT 72200C/72487 a separable bearing?

Yes. The outer ring can be separated from the inner assembly.

What types of loads can 72200C/72487 accommodate?

The bearing accommodates radial loads and axial loads in one direction. Two oppositely arranged tapered roller bearings are frequently used when axial shaft location is required in both directions.

Can it be replaced with a bearing having a 50 mm bore?

Not without mounting modifications. The bearing has a 50.8 mm bore, not 50 mm. This difference is significant for correct shaft fitting.

Does 72200C/72487 have integrated seals?

It is an open bearing. Protection against contamination should be provided by the sealing arrangement of the surrounding machine.

Can the clearance of CRAFT 72200C/72487 be adjusted?

Yes. Axial clearance or preload can be adjusted within an appropriately designed bearing arrangement.

CRAFT 72200C/72487 50.8x123.825x36.512 - Key Information

CRAFT 72200C/72487 is a single-row inch-series tapered roller bearing measuring 50.8x123.825x36.512 mm. It consists of the 72200C inner assembly and 72487 outer ring. The bearing accommodates radial loads and axial loads in one direction. Its separable construction allows independent ring installation and axial clearance adjustment within a suitable bearing arrangement.

The specialist B2B industrial trading platform simmering.pl supplies CRAFT tapered roller bearings for industrial and maintenance applications, supporting component selection based on complete catalogue designations, dimensions and technical requirements, with worldwide shipping from stock in Poland.

CRAFT
72200C/72487 CRAFT
Processing time: 2-3 days

Data sheet

Diameter in. (mm)
50.8
Diameter out. (mm)
123.825
Height (mm)
36.512
Mark
CRAFT