32013 FERSA PFI 65x100x23 mm single-row tapered roller bearing from the 320 series. Inside diameter 65 mm, outside diameter 100 mm and overall width 23 mm. Separable construction designed to accommodate radial and unidirectional axial loads. Allows clearance or preload adjustment in a suitable bearing arrangement. Typical applications include gearboxes, power transmission mechanisms and industrial machinery. Specialist B2B industrial trading platform simmering.pl.
|
Parameter |
Specification |
|---|---|
|
Product designation |
32013 FERSA PFI |
|
Brand indicated in the product listing |
FERSA PFI |
|
Bearing designation |
32013 |
|
Bearing type |
Tapered roller bearing |
|
Construction |
Single-row, separable |
|
Dimensional series |
320 |
|
Inside diameter (d) |
65 mm |
|
Outside diameter (D) |
100 mm |
|
Overall width (T) |
23 mm |
|
Inner ring width (B) |
23 mm |
|
Outer ring width (C) |
17.5 mm |
|
Rolling elements |
Tapered rollers |
|
Axial load direction |
Unidirectional |
|
Load types |
Radial and axial |
|
Ring construction |
Separable |
|
Sealing arrangement |
Open design |
|
Nominal dimensions |
65x100x23 mm |
The basic dynamic load rating C, basic static load rating C0, fatigue load limit Pu, permissible rotational speeds, weight, precision class and cage construction require confirmation from the technical documentation for the exact product.
|
Designation element |
Technical meaning |
|---|---|
|
3 |
Tapered roller bearing family |
|
320 |
Tapered roller bearing dimensional series |
|
13 |
Bore code corresponding to 65 mm |
|
FERSA PFI |
Brand designation provided for the product |
In the standard bearing designation system, bore code 13 corresponds to a nominal bore diameter of 65 mm.
For bore codes from 04 upwards, the nominal bore diameter is calculated by multiplying the code by 5:
13 x 5 = 65 mm.
The 320 series includes single-row tapered roller bearings with defined dimensional proportions.
Compared with certain other tapered roller bearing series, it offers relatively compact radial dimensions.
However, the selection of a particular series depends not only on dimensions but also on the required load capacity, rigidity, rotational speed and bearing arrangement.
FERSA and PFI are names used in the rolling bearing industry. However, the commercial designation "FERSA PFI" alone does not establish which company manufactured the specific bearing.
Product identification should therefore be based on the marking on the bearing ring, original packaging and accompanying technical documentation.
The two brands should not automatically be treated as identical, nor should identical catalogue specifications be attributed to them without confirmation.
The inner ring is designed to fit a shaft with a nominal diameter of 65 mm.
Tapered rollers operate on its conical raceway and are maintained at appropriate intervals by the cage.
The inner ring, rollers and cage form an assembly that can be separated from the outer ring.
The outer ring has a nominal outside diameter of 100 mm and a width of 17.5 mm.
Its raceway is inclined relative to the rotational axis to provide the correct rolling contact geometry for the tapered rollers.
Proper seating of the outer ring in the housing is important for maintaining the operating geometry of the complete bearing assembly.
In a tapered roller bearing, loads are transmitted through the contact surfaces between the rollers and raceways.
Unlike the idealised point contact found in ball bearings, tapered roller bearings use line contact.
This provides a construction suitable for accommodating substantial combined loads.
The separable construction facilitates installation in assemblies where the bearing components are mounted independently.
However, it does not mean that inner and outer rings from different manufacturers or construction variants can be combined indiscriminately.
The 32013 bearing accommodates forces acting perpendicular to the shaft axis.
Tapered rollers distribute the applied load across their contact surfaces with the raceways.
When evaluating load-carrying capability, the actual forces acting within the assembly and the manufacturer's specific bearing load ratings must be considered.
A single-row tapered roller bearing accommodates axial loads in one direction.
Where a shaft must be axially located in both directions, two tapered roller bearings are frequently arranged in opposition.
Such arrangements must also account for the internal axial forces generated in tapered roller bearings under radial loading.
Tapered roller bearings are used in assemblies requiring controlled shaft positioning.
Appropriate clearance or preload adjustment makes it possible to influence the rigidity of the complete bearing arrangement.
Insufficient operating clearance may cause excessive heating, while excessive clearance can increase displacement and reduce shaft guidance accuracy.
The 32013 bearing should not be treated in the same way as a standard deep groove ball bearing with a specified internal radial clearance.
For separable tapered roller bearings, the final operating clearance or preload depends on the installation method and adjustment of the complete bearing assembly.
Clearance can be adjusted through appropriate positioning of the bearing rings, the use of spacers or adjustment mechanisms incorporated into the equipment design.
The target value must be established from the technical documentation for the specific assembly.
Preload can increase bearing arrangement rigidity and reduce unwanted shaft displacement.
However, excessive preload increases friction and operating temperature, potentially reducing bearing service life.
The correct preload must not be determined solely from the bearing dimensions of 65x100x23 mm.
Tapered roller bearings commonly use appropriately heat-treated bearing steels that provide resistance to rolling contact stresses.
The exact steel grade used in 32013 FERSA PFI requires confirmation from the manufacturer of the specific product.
The cage maintains the tapered rollers at appropriate intervals and guides their movement during rotation.
A specific cage material or manufacturing method should not be attributed to this bearing without verification of the technical documentation.
The open construction of the 32013 bearing requires lubrication to be provided by the surrounding mechanical assembly.
Depending on the application, tapered roller bearings may be lubricated with oil or grease.
Lubricant selection must take into account load, rotational speed, temperature and equipment requirements.
Natural variations of the product designation include:
32013 FERSA PFI
FERSA PFI 32013
32013 65x100x23
32013 tapered roller bearing
65x100x23 tapered roller bearing
32013 single-row tapered roller bearing
|
Brand |
Designation |
Dimensions |
|---|---|---|
|
SKF |
32013 X/Q |
65x100x23 mm |
|
FAG |
32013-X |
65x100x23 mm |
|
NSK |
HR32013XJ |
65x100x23 mm |
|
NTN |
4T-32013X |
65x100x23 mm |
|
KOYO |
32013JR |
65x100x23 mm |
|
TIMKEN |
32013X |
65x100x23 mm |
The listed designations refer to bearings belonging to the same nominal dimensional family. They do not constitute confirmation of complete technical interchangeability.
Differences may include internal geometry, load ratings, manufacturing accuracy, cage construction and adjustment requirements.
|
Designation |
Inside diameter |
Outside diameter |
Overall width |
|---|---|---|---|
|
32011 |
55 mm |
90 mm |
23 mm |
|
32012 |
60 mm |
95 mm |
23 mm |
|
32013 |
65 mm |
100 mm |
23 mm |
|
32014 |
70 mm |
110 mm |
25 mm |
|
32015 |
75 mm |
115 mm |
25 mm |
Individual sizes within the 320 series are not directly interchangeable because their mounting dimensions differ.
|
Feature |
32013 tapered roller bearing |
Deep groove ball bearing |
|---|---|---|
|
Rolling elements |
Tapered rollers |
Balls |
|
Contact geometry |
Line contact |
Idealised point contact |
|
Radial loads |
Yes |
Yes |
|
Axial loads |
In one direction |
In both directions, within design limits |
|
Clearance adjustment in an assembly |
Possible |
Different clearance selection and adjustment principles |
|
Construction |
Separable |
Usually non-separable |
A tapered roller bearing is not a direct replacement for a deep groove ball bearing simply because the dimensions are similar.
Before selecting the bearing, verify:
The complete 32013 designation and actual product brand.
Shaft journal diameter of 65 mm.
Housing bore diameter of 100 mm.
Overall mounting width of 23 mm.
Required dynamic and static load ratings.
Radial and axial operating loads.
Direction of axial forces.
Required operating clearance or preload.
Permissible rotational speed.
Lubrication method.
Tolerance and cage requirements.
When replacing a bearing from another brand with 32013 FERSA PFI, compare the catalogue specifications of the exact versions rather than relying solely on their basic dimensions.
Single-row tapered roller bearings from the 320 series are used in mechanisms that experience simultaneous radial and axial loading.
Typical applications for this bearing construction include:
Mechanical gearboxes and industrial reduction units.
Power transmission systems.
Differential mechanisms.
Vehicle wheel hubs and axle assemblies.
Agricultural machinery.
Construction equipment.
Shafts and rotating assemblies in industrial machinery.
These are applications characteristic of tapered roller bearing construction, not a confirmed list of equipment fitted with the specific 32013 FERSA PFI product.
Before installation, check the cleanliness of the shaft, housing and bearing components.
Mounting surfaces should be free from burrs, corrosion and mechanical damage.
The separable construction allows the outer ring and the inner ring assembly with tapered rollers to be installed independently.
Mounting force should be applied to the ring being installed with an interference fit.
Force must not be transmitted through the rollers and raceways.
After installation, axial clearance or preload must be adjusted according to the equipment manufacturer's requirements.
Incorrect adjustment may cause excessive heating, noise, vibration and reduced bearing service life.
The bearing requires appropriate lubrication during operation.
Before installation, it should be protected from contamination and moisture and stored in its original packaging.
The inside diameter is 65 mm, outside diameter is 100 mm and overall width is 23 mm. The outer ring width is 17.5 mm.
Yes. The designation 32013 identifies a single-row tapered roller bearing with a separable construction.
These names should not automatically be treated as identical. The actual brand of the specific bearing must be confirmed from its markings and packaging.
Yes. A single-row tapered roller bearing accommodates axial loads in one direction. A pair of bearings is frequently used to locate a shaft axially in both directions.
The standard 32013 construction is open and does not incorporate integrated seals. Protection against contamination must be provided by the surrounding assembly.
Yes. Axial clearance or preload can be adjusted within an appropriately designed tapered roller bearing arrangement.
Both products belong to the same nominal dimensional family of 65x100x23 mm. Before substitution, load ratings, tolerances, construction and the requirements of the specific application must be compared.
Tapered roller bearing construction is suitable for many gearboxes subjected to combined loading. Selecting the exact bearing requires verification of loads, rotational speeds and lubrication conditions.
32013 FERSA PFI is a single-row tapered roller bearing measuring 65x100x23 mm. It belongs to the 320 series, features a separable construction and accommodates radial loads and axial loads in one direction. In a suitable bearing arrangement, clearance or preload can be adjusted. Correct selection requires confirmation of the actual brand and technical specifications.
The specialist B2B industrial trading platform simmering.pl supplies tapered roller bearings for industrial, maintenance and technical applications, supporting component selection based on bearing designation, dimensions and operating requirements.
Data sheet