SNR SNOE 224 CBF and SNOE 228 CBL are split plummer block housings designed for oil-lubricated spherical roller bearings. Although they share the same fundamental construction, they perform different axial functions. The CBF version provides a locating bearing arrangement, while the CBL version allows axial displacement. They also differ in shaft diameter, dimensions, weight and oil capacity.

Understanding these differences is essential when selecting bearing housings for industrial machinery, particularly where shaft positioning, thermal expansion and continuous lubrication influence operational reliability.

Two large SNR bearing housings supplied for an industrial application

Industrial bearing procurement is not limited to standard rolling bearings or conventional bearing units. Some applications require large, specialised housings designed to operate under demanding mechanical and thermal conditions.

An example is the successful supply of two SNR bearing housings:

  • SNR SNOE 224 CBF

  • SNR SNOE 228 CBL

Both belong to the SNOE series of split plummer block housings.

The larger SNOE 228 CBL weighs approximately 113 kg and has an overall height of 355 mm.

Despite their similar appearance, these two housings are not identical in function.

The SNOE 224 CBF is designed as a locating bearing housing, whereas the SNOE 228 CBL is a non-locating bearing housing.

This distinction is particularly important in shaft-support systems where one bearing position must locate the shaft axially and another must accommodate displacement caused by thermal expansion.

What is the SNR SNOE bearing housing series?

The SNR SNOE series consists of split plummer block housings developed for spherical roller bearings with cylindrical bores and oil lubrication.

The construction combines a robust cast-iron housing with an integrated oil reservoir, oil-distributing ring and labyrinth sealing arrangement.

The principal components and features include:

  • Horizontally split housing body.

  • Removable upper housing section.

  • Bearing chamber for a spherical roller bearing.

  • Integrated oil reservoir.

  • Oil-distributing ring.

  • Non-contact labyrinth seals.

  • Oil level indicator.

  • Ventilation arrangement.

  • Housing covers and associated mounting components.

The split design provides access to the bearing assembly during inspection, servicing and replacement.

In large industrial installations, this can reduce the need to dismantle the entire shaft assembly.

However, the housing must always be assembled according to the manufacturer's instructions, including the correct positioning of internal components and tightening of fasteners.

SNOE 224 CBF vs SNOE 228 CBL – Technical specifications

The following comparison presents the principal catalogue dimensions and technical characteristics of the two housings.

Technical parameter SNOE 224 CBF SNOE 228 CBL
Manufacturer SNR SNR
Housing series SNOE SNOE
Housing construction Split plummer block Split plummer block
Bearing arrangement Locating Non-locating
Housing material Grey cast iron Grey cast iron
Lubrication method Oil Oil
Shaft diameter, d 120 mm 140 mm
Bearing seat diameter, D 215 mm 250 mm
Housing length, a 550 mm 570 mm
Housing foot width, b 165 mm 175 mm
Housing foot height, c 55 mm 65 mm
Shaft centre height, h 175 mm 190 mm
Overall height, h1 320 mm 355 mm
Width over covers, l1 258 mm 269 mm
Mounting hole distance, m 440 mm 460 mm
Mounting hole distance, n 80 mm 100 mm
Axial displacement parameter, l2 (x2) 0 mm 15 mm
Operating oil level 50–70 mm 55–70 mm
Approximate oil quantity 2.3 L 3.7 L
Approximate housing weight 77 kg 113 kg
Associated bearing series 22224 22228
Associated locknut KM 24 KM 28
Associated lock washer MB 24 MB 28
Housing fixing bolts M30 M30
Fixing bolt tightening torque 870 Nm 870 Nm
Housing connecting bolts M20 M20
Connecting bolt tightening torque 260 Nm 260 Nm

The SNOE 228 CBL is designed for a shaft diameter 20 mm larger than that of the SNOE 224 CBF.

Its approximate weight is also 36 kg greater.

These differences result primarily from the different housing sizes.

However, the most important functional difference concerns the axial arrangement of the bearing.

The fundamental difference between CBF and CBL

The CBF and CBL executions share the same basic SNOE housing concept.

Both use a split cast-iron body, oil-ring lubrication and labyrinth sealing.

The distinction concerns the way the bearing is positioned axially within the housing.

SNOE 224 CBF – Locating bearing arrangement

The SNOE 224 CBF is a locating bearing housing.

A locating bearing arrangement establishes the axial position of the shaft relative to the machine structure.

The bearing outer ring is axially restrained within the housing, while the inner ring is secured to the shaft using the appropriate mounting components.

This allows axial forces to be transmitted between the shaft and the housing within the operating limits of the bearing arrangement.

For SNOE 224 CBF, NTN-SNR specifies:

Floating bearing displacement, l2 (x2): 0 mm.

This value reflects the locating function of the housing.

The bearing arrangement is not designed to provide the axial movement allowance required at a non-locating support position.

SNOE 228 CBL – Non-locating bearing arrangement

The SNOE 228 CBL is a non-locating bearing housing.

In this configuration, the bearing arrangement permits axial displacement relative to the housing.

This movement is particularly important when the shaft expands or contracts due to temperature changes.

Instead of restricting axial movement at both bearing positions, the non-locating housing allows the shaft-bearing assembly to accommodate the required displacement.

For SNOE 228 CBL, NTN-SNR specifies:

Floating bearing displacement, l2 (x2): 15 mm.

The catalogue notation (x2) is significant and should be interpreted using the manufacturer's dimensional drawing.

The published 15 mm value should not automatically be described as ±15 mm without confirming the exact dimensional reference.

The essential difference remains clear: CBF provides axial location, whereas CBL provides an allowance for axial displacement.

Why do locating and non-locating SNOE housings look almost identical?

The external appearance of the two housing types is very similar because they use the same fundamental engineering concept.

Both contain a bearing chamber, oil reservoir, oil-distributing ring, labyrinth seals and split housing body.

The differences are primarily associated with the internal arrangement that determines whether the bearing is axially located or permitted to move.

In a locating arrangement, the bearing outer ring is restrained against axial displacement relative to the housing.

In a non-locating arrangement, the bearing outer ring can move within the designed axial allowance.

Therefore, the external housing geometry alone is not sufficient to identify the axial function.

The complete manufacturer designation must always be checked.

Comparing CBF and CBL within the same housing size

To distinguish differences caused by housing size from differences caused by bearing arrangement, it is useful to compare two versions of the same SNOE size.

NTN-SNR offers both SNOE 224 CBF and SNOE 224 CBL.

These housings share the same principal dimensions:

  • Shaft diameter: 120 mm.

  • Bearing seat diameter: 215 mm.

  • Housing length: 550 mm.

  • Shaft centre height: 175 mm.

  • Approximate housing weight: 77 kg.

  • Approximate oil quantity: 2.3 L.

Their axial displacement parameters differ.

Housing designation Bearing function Catalogue l2 (x2)
SNOE 224 CBF Locating 0 mm
SNOE 224 CBL Non-locating 13 mm

This comparison demonstrates that the CBF and CBL suffixes identify different bearing arrangements, even when the principal housing dimensions are identical.

For industrial maintenance and replacement projects, this distinction is essential.

A housing of the correct size but with the wrong axial arrangement may be unsuitable for the machine.

Thermal expansion and the importance of a non-locating bearing

Thermal expansion is one of the main reasons for using locating and non-locating bearing arrangements.

When a steel shaft heats up during operation, its length increases.

The amount of expansion depends on the original shaft length, the temperature change and the material's coefficient of thermal expansion.

The simplified calculation is:

ΔL = α × L × ΔT

Where:

  • ΔL = change in shaft length.

  • α = coefficient of linear thermal expansion.

  • L = original shaft length.

  • ΔT = temperature difference.

Consider an illustrative example:

  • Steel shaft length between bearing positions: 3,000 mm.

  • Temperature increase: 50°C.

  • Assumed coefficient of thermal expansion: 12 × 10⁻⁶ /°C.

The calculated shaft expansion is:

ΔL = 12 × 10⁻⁶ × 3,000 × 50 = 1.8 mm

This example is intended to explain the engineering principle. It is not a specified operating condition for either SNOE housing.

Even a small axial expansion can create significant forces if the shaft is restrained at both ends.

A correctly designed bearing arrangement uses one locating position to establish the shaft's axial reference and one non-locating position to accommodate the required movement.

The required displacement allowance must be determined from the actual shaft geometry and operating conditions.

How the SNOE oil-ring lubrication system works

Both SNOE 224 CBF and SNOE 228 CBL use an integrated oil lubrication system.

One of its principal components is the oil-distributing ring.

During operation, the ring collects lubricant from the oil reservoir in the lower part of the housing and carries it towards the bearing.

This provides a means of supplying oil to the bearing without relying exclusively on an external oil pump.

Oil reservoir

The lower housing contains the lubricating oil.

The reservoir must maintain a sufficient oil level for the distributing ring to function correctly.

Oil-distributing ring

The ring transfers oil from the reservoir towards the bearing.

Correct positioning and freedom of movement are important for proper lubrication.

Spherical roller bearing

The bearing receives lubricant that reduces direct contact between rolling surfaces and helps control friction and wear.

Oil level indicator

The indicator allows the operator to monitor the oil level and maintain it within the manufacturer's specified operating range.

Ventilation arrangement

The ventilation system helps maintain appropriate internal pressure conditions while limiting the entry of contaminants.

The correct interaction of these components is essential for reliable operation.

Oil quantities and operating levels

NTN-SNR specifies different oil quantities and operating levels for the two housing sizes.

Lubrication parameter SNOE 224 CBF SNOE 228 CBL
Approximate oil quantity 2.3 L 3.7 L
Minimum operating oil level 50 mm 55 mm
Maximum operating oil level 70 mm 70 mm

The nominal oil quantity is a filling reference.

The actual operating oil level must be verified according to the manufacturer's instructions and the relevant indicator reference.

If the oil level is too low, the distributing ring may not collect enough lubricant.

If the level is too high, additional oil agitation and heat generation may occur.

The oil level should therefore remain within the prescribed operating range.

Selecting the correct oil viscosity

Oil viscosity must be selected according to the actual operating conditions.

Relevant factors include:

  • Bearing size and type.

  • Rotational speed.

  • Operating temperature.

  • Applied loads.

  • Lubrication conditions.

The NTN-SNR lubrication guidance refers to the minimum required operating viscosity, designated ν1.

The oil should provide sufficient viscosity at the actual bearing operating temperature.

The manufacturer's general guidance also identifies an operating viscosity target of approximately:

ν = 2 × ν1

This does not establish a universal ISO VG oil grade for either SNOE housing.

The correct lubricant must be selected using the bearing manufacturer's recommendations and the machine's operating parameters.

Labyrinth seals in SNOE bearing housings

The SNOE series uses labyrinth sealing arrangements.

These seals operate without the continuous contact between an elastomeric sealing lip and the rotating shaft that is characteristic of conventional radial shaft seals.

Their sealing effect is based on a series of passages that restrict the movement of contaminants towards the bearing chamber.

The principal advantages of this arrangement include reduced contact friction and the absence of conventional sealing-lip wear.

However, labyrinth seals are not automatically suitable for every contamination environment.

Their performance depends on operating conditions, installation accuracy and the design of the surrounding machinery.

Correct assembly of the labyrinth components is essential.

Important assembly and maintenance requirements

The NTN-SNR installation documentation identifies several procedures that directly influence the reliability of the housing assembly.

Cleanliness during assembly

The shaft, housing components, tools and working area must be clean.

Contamination introduced during assembly can damage rolling surfaces and shorten bearing life.

Correct installation of internal components

The bearing, oil-distributing ring, labyrinth seals, covers and retaining components must be installed in the specified sequence.

During disassembly, components should be identified to support correct reassembly.

Controlled component heating

The manufacturer's assembly instructions describe heating the inner labyrinth component to approximately 90°C.

For bearing installation, the procedure specifies a maximum heating temperature of 120°C.

These are assembly-related temperatures, not permissible continuous operating temperatures.

Fastener tightening

The housing connecting bolts and fixing bolts must be tightened according to the prescribed procedure.

For the two housings discussed, the catalogue lists:

Fastener Specification Tightening torque
Housing fixing bolts M30 870 Nm
Housing connecting bolts M20 260 Nm

Progressive tightening in a cross pattern helps maintain correct housing assembly.

Joint sealing

The housing joint surfaces and covers must be sealed according to the manufacturer's instructions.

Specified sealing components should be replaced when required during maintenance.

Initial operation

Before commissioning, the shaft should be checked for free rotation.

The oil level must be verified, and the bearing temperature should be monitored during initial operation.

A controlled running-in procedure should be followed where applicable.

Associated spherical roller bearings and mounting components

The NTN-SNR catalogue associates the two housing models with different spherical roller bearing series.

Component SNOE 224 CBF SNOE 228 CBL
Associated bearing series 22224 22228
Locknut KM 24 KM 28
Lock washer MB 24 MB 28

The housing series is designed for spherical roller bearings with cylindrical bores.

However, the basic bearing series number does not identify every possible bearing execution.

Bearing internal clearance, cage design and other characteristics must be selected according to the machine's requirements.

The listed associated components do not necessarily represent the complete contents of the supplied housing package.

Can SNOE 224 CBF and SNOE 228 CBL operate on the same shaft?

Locating and non-locating bearing arrangements are commonly used together in industrial shaft-support systems.

However, these two specific housings should not automatically be considered a matched pair.

Their nominal shaft diameters are different:

  • SNOE 224 CBF: 120 mm.

  • SNOE 228 CBL: 140 mm.

Their shaft centre heights also differ:

  • SNOE 224 CBF: 175 mm.

  • SNOE 228 CBL: 190 mm.

Using both housings in one machine would therefore require an appropriately engineered shaft and mounting arrangement.

The fact that one housing is locating and the other is non-locating does not establish mechanical compatibility.

Compatibility must be verified from the complete machine design.

Typical industrial applications

The SNOE housing series is suitable for consideration in industrial equipment requiring oil-lubricated spherical roller bearing arrangements.

Typical applications include:

  • Large industrial fans.

  • Hammer mills.

  • Stone crushers.

  • Heavy-duty power transmission systems.

The final selection depends on the actual operating loads, shaft dimensions, speed, thermal conditions and lubrication requirements.

The housing must be evaluated as part of the complete bearing system rather than as an isolated component.

What should be verified before ordering an SNOE housing?

Correct identification of the complete housing designation is essential.

Before ordering, verify:

  • Full NTN-SNR product designation.

  • Locating or non-locating arrangement.

  • Shaft diameter.

  • Bearing seat dimensions.

  • Bearing type and execution.

  • Required axial displacement.

  • Housing mounting dimensions.

  • Oil lubrication requirements.

  • Sealing configuration.

  • Supply scope and included accessories.

For maintenance and replacement projects, the existing housing designation should be checked against the machine documentation and the manufacturer's drawings.

A housing with similar dimensions may have a different axial function.

Specialist industrial bearing housing supply through simmering.pl

The successful supply of SNR SNOE 224 CBF and SNOE 228 CBL demonstrates the importance of precise technical identification in industrial procurement.

Although these housings share a common construction concept, their locating and non-locating functions make them suitable for different positions within a correctly designed bearing arrangement.

The specialist B2B trading platform simmering.pl supports industrial customers in sourcing rolling bearings, bearing housings, rotary shaft seals and other technical components for machinery and industrial installations.

For specialist bearing housings, the complete manufacturer designation, bearing arrangement and installation requirements are essential to successful procurement.

Worldwide shipping is available for products held in stock in Poland.

Frequently Asked Questions

What is the main difference between SNOE 224 CBF and SNOE 228 CBL?

SNOE 224 CBF is a locating bearing housing designed for a 120 mm shaft. SNOE 228 CBL is a non-locating housing designed for a 140 mm shaft. The CBF arrangement establishes axial location, while the CBL arrangement allows defined axial displacement.

Do both housings use the same lubrication system?

Yes. Both belong to the oil-lubricated SNOE series and use an oil-distributing ring. Their nominal oil quantities differ because the housings have different sizes.

What axial displacement does SNOE 228 CBL allow?

NTN-SNR lists an l2 – Floating bearing displacement (x2) parameter of 15 mm. This value must be interpreted according to the manufacturer's dimensional drawing.

Why is the axial displacement of SNOE 224 CBF zero?

The CBF version is a locating bearing arrangement. Its purpose is to establish the axial position of the shaft rather than provide axial movement at the bearing housing.

Are CBF and CBL housings interchangeable?

Not automatically. Their axial functions differ, and the dimensions, bearing configuration and shaft requirements must be verified before considering any replacement.

Which bearings are associated with these housings?

The catalogue associates SNOE 224 CBF with bearing series 22224 and SNOE 228 CBL with bearing series 22228. The exact bearing execution must be confirmed for the intended application.

How much oil is required?

The approximate oil quantities are 2.3 litres for SNOE 224 CBF and 3.7 litres for SNOE 228 CBL. The actual oil level must remain within the manufacturer's specified operating range.

Why is a locating/non-locating arrangement important?

It allows one bearing position to establish the shaft's axial location while the other accommodates axial movement, including thermal expansion. This helps prevent unnecessary axial restraint and additional bearing loads.