GE 80 LO NAF 80x120x80 mm is a radial spherical plain bearing with an 80 mm bore, 120 mm outside diameter and stated 80 mm inner ring width. Its spherical sliding surfaces accommodate radial loads, oscillating movements and angular misalignment. The LO version requires manufacturer confirmation of outer ring width, sliding contact materials, load ratings and lubrication requirements. Available through simmering.pl, a specialist B2B industrial supply platform, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Brand |
NAF |
|
Product designation |
GE 80 LO |
|
Bearing category |
Spherical plain bearing |
|
Bearing type |
Radial |
|
Nominal bore diameter (d) |
80 mm |
|
Nominal outside diameter (D) |
120 mm |
|
Stated inner ring width (B) |
80 mm |
|
Outer ring width (C) |
Requires manufacturer confirmation |
|
Rolling elements |
None |
|
Operating principle |
Sliding contact |
|
Contact geometry |
Spherical |
|
Inner ring material |
Requires NAF confirmation |
|
Outer ring material |
Requires NAF confirmation |
|
Sliding contact combination |
Requires NAF confirmation |
|
Lubrication requirements |
Require confirmation |
|
Dynamic load rating |
Requires manufacturer confirmation |
|
Static load rating |
Requires manufacturer confirmation |
|
Permissible misalignment angle |
Requires manufacturer confirmation |
|
Operating temperature range |
Requires manufacturer confirmation |
|
Bearing mass |
Requires manufacturer confirmation |
|
Sealing arrangement |
Not confirmed |
|
Dimensional standard |
Not confirmed for this specific version |
Technical note: The dimensions are taken from the supplied product designation. Before installation or substitution, the complete dimensional drawing and technical specifications of the NAF GE 80 LO version should be verified.
|
Symbol |
Dimension |
Description |
|---|---|---|
|
d |
80 mm |
Nominal bore diameter |
|
D |
120 mm |
Nominal outside diameter |
|
B |
80 mm |
Stated inner ring width |
|
C |
Not confirmed |
Outer ring width |
The designation 80x120x80 mm identifies the three supplied dimensions.
Unlike many conventional rolling bearings, spherical plain bearings may have different inner and outer ring widths.
The outer ring width must therefore be checked separately when designing or verifying the installation.
A radial spherical plain bearing uses mating spherical sliding surfaces to accommodate relative angular movement.
Typical construction consists of:
An inner ring with a convex spherical sliding surface.
An outer ring with a matching concave spherical sliding surface.
A sliding interface that transfers load between the rings.
Geometry that permits angular displacement between the inner and outer ring axes.
Unlike rolling bearings, spherical plain bearings do not use balls or rollers to transfer loads.
The spherical contact surfaces transmit load through sliding contact.
Bearing performance depends on the sliding material combination, lubrication, load, oscillation angle, movement frequency and environmental conditions.
The exact sliding contact combination used in the NAF GE 80 LO must be confirmed from manufacturer documentation.
The inner ring is typically mounted on a shaft or pin.
Its convex spherical surface allows angular movement relative to the outer ring.
The nominal bore diameter of the GE 80 LO is 80 mm.
The outer ring is typically installed in a housing or connecting component.
Its concave spherical surface supports the inner ring and transfers load into the surrounding structure.
The exact outer ring width and construction require verification.
|
Designation element |
Meaning |
|---|---|
|
GE |
Radial spherical plain bearing family |
|
80 |
Nominal bore diameter of 80 mm |
|
LO |
Manufacturer-specific design variant requiring confirmation |
|
NAF |
Product brand |
The LO suffix should not automatically be interpreted as equivalent to E, ES, ES-2RS, UK or other spherical plain bearing variants.
Differences may involve ring widths, sliding contact materials, lubrication arrangements and mounting geometry.
The GE 80 LO belongs to the radial spherical plain bearing category.
Its primary function is to accommodate radial loads.
Depending on the specific design, radial spherical plain bearings may also accommodate certain axial loads.
However, permissible axial loading must be determined using the manufacturer's technical data.
Radial loads act perpendicular to the bearing bore axis.
They are transmitted through the spherical contact surfaces between the inner and outer rings.
Axial load capacity depends on the spherical contact geometry, ring construction and direction of the applied force.
A specific permissible axial load must not be assigned to the NAF GE 80 LO without verified manufacturer data.
|
Parameter |
Description |
|---|---|
|
C |
Dynamic load rating according to the applicable manufacturer methodology |
|
C0 |
Static load rating |
|
Fr |
Applied radial load |
|
Fa |
Applied axial load |
|
β |
Angular displacement |
|
p |
Contact pressure |
|
v |
Sliding velocity |
Permissible loading and bearing service life depend on the construction and sliding contact materials.
The dynamic and static load ratings of the GE 80 LO NAF require manufacturer confirmation.
Conventional rolling bearing fatigue life calculations should not be applied directly to spherical plain bearings.
Spherical plain bearings allow angular displacement between the inner and outer ring axes.
This capability is useful in assemblies involving:
Oscillating movements.
Changing alignment between connected components.
Geometric misalignment.
Structural deflection.
Changes in joint angle during operation.
The maximum permissible misalignment angle for the GE 80 LO NAF must be verified in the manufacturer's documentation.
It cannot be determined solely from the dimensions 80x120x80 mm.
Depending on their construction, spherical plain bearings may be:
Designed for periodic relubrication.
Equipped with lubrication holes or grooves.
Manufactured with self-lubricating sliding contact materials.
The GE 80 LO NAF designation alone does not establish its lubrication arrangement.
Before operation, verify:
Whether relubrication is required.
The recommended lubricant.
The presence of lubrication holes or grooves.
Recommended maintenance intervals.
Permissible environmental conditions.
A maintenance-free design must not be assumed without manufacturer confirmation.
Spherical plain bearings are commonly used in assemblies involving oscillating and angular movements.
Their service life is influenced by:
Applied load.
Oscillation angle.
Movement frequency.
Sliding velocity.
Sliding contact material.
Lubrication.
Operating temperature.
Environmental contamination.
Condition of mating surfaces.
Bearing selection must account for the type of movement as well as the installation dimensions.
|
Designation |
General characteristics |
Interchangeability |
|---|---|---|
|
GE 80 LO NAF |
Radial spherical plain bearing, supplied dimensions 80x120x80 mm |
Reference product |
|
GE 80 ES |
Radial spherical plain bearing, ES variant |
Requires dimensional and construction verification |
|
GE 80 ES-2RS |
Variant with seals on both sides |
Requires verification |
|
GE 80 UK |
Variant with a different sliding contact arrangement |
Requires verification |
|
GE 80 LO from other brands |
Similar designation |
Complete compatibility must be confirmed |
The LO and ES suffixes may identify different bearing constructions.
Differences can include ring widths, sliding contact materials and lubrication requirements.
Matching bore and outside diameters do not establish interchangeability.
A spherical plain bearing transmits load through sliding contact between spherical surfaces.
A rolling bearing uses balls or rollers moving between raceways.
These bearing types have different operating characteristics, service life calculation methods and maintenance requirements.
Large radial spherical plain bearings may be used in appropriately designed:
Hydraulic cylinder joints.
Articulated mechanisms.
Construction machinery.
Agricultural machinery.
Material handling equipment.
Lever and linkage systems.
Industrial suspension mechanisms.
Oscillating mechanical joints.
These are general applications of radial spherical plain bearings, not a verified list of equipment compatible with the NAF GE 80 LO.
Before ordering or installation, verify:
Shaft or pin diameter of 80 mm.
Housing bore diameter of 120 mm.
Inner ring width of 80 mm.
Outer ring width.
Sliding contact material combination.
Lubrication requirements.
Radial and axial loads.
Permissible angular misalignment.
Type and frequency of movement.
Operating temperature.
Exposure to dust and moisture.
Required mounting fits.
Important: Full compatibility must be established using the complete geometry and technical specifications of the LO version, not only its three nominal dimensions.
Correct installation depends on suitable mating components.
Important considerations include:
Shaft or pin dimensional accuracy.
Housing bore dimensional accuracy.
Appropriate surface condition.
Correct mounting fits.
Adequate support of the bearing rings.
Prevention of unwanted ring movement.
Sufficient clearance for angular displacement.
Exact mounting tolerances should follow the manufacturer's recommendations and the equipment design.
During installation:
Clean all mounting surfaces.
Verify shaft, pin and housing dimensions.
Check the required fits.
Use appropriate installation tools.
Avoid damaging the spherical sliding surfaces.
Apply mounting forces to the correct bearing ring.
Ensure proper support of both rings.
Check that the bearing can articulate freely.
Provide lubrication where required by the design.
Inspect the joint after commissioning.
Incorrect installation may cause excessive friction, localized overloading and premature wear.
Excessive loading: May deform or damage the sliding surfaces.
Insufficient lubrication: In bearings requiring lubrication, it can increase friction and accelerate wear.
Contamination: Abrasive particles can damage the spherical contact surfaces.
Incorrect mounting fits: May cause unwanted movement between the bearing rings and their mounting surfaces.
Excessive angular displacement: May cause unintended contact between structural components.
Corrosion: Can damage the sliding surfaces and restrict movement.
Incorrect bearing selection: May result in overloading and reduced service life.
GE 80 LO NAF 80x120x80
GE80LO NAF
GE80 LO
NAF GE 80 LO
GE 80 LO spherical plain bearing
NAF GE80LO radial spherical plain bearing
GE 80 LO plain bearing
GE 80 LO articulated bearing
GE 80 LO 80 mm bore spherical bearing
These alternative designations support product identification in international technical catalogues, ERP systems and industrial search engines.
What are the dimensions of the GE 80 LO NAF bearing?
The supplied dimensions are 80x120x80 mm: 80 mm bore diameter, 120 mm outside diameter and 80 mm stated inner ring width. The outer ring width requires separate confirmation.
Is the GE 80 LO a ball bearing?
No. It is a spherical plain bearing that transfers loads through mating spherical sliding surfaces rather than rolling elements.
Can the GE 80 LO NAF accommodate radial loads?
Yes. It is a radial spherical plain bearing designed primarily to accommodate radial loading.
Does the bearing allow angular misalignment?
Yes. Its spherical sliding geometry permits angular displacement between the rings. The maximum permissible angle must be confirmed for the NAF version.
Does the GE 80 LO require lubrication?
Lubrication requirements depend on the sliding contact materials and specific construction. Manufacturer documentation is required to determine whether relubrication is necessary.
Can the GE 80 LO replace a GE 80 ES bearing?
Direct interchangeability should not be assumed. All dimensions, sliding materials and operating characteristics must be compared.
What is the dynamic load rating of the GE 80 LO NAF?
The exact dynamic load rating requires confirmation from the manufacturer.
Can the GE 80 LO be used in a hydraulic cylinder?
Radial spherical plain bearings are commonly used in hydraulic cylinder joints. However, compatibility of the specific GE 80 LO NAF depends on load requirements, mounting dimensions and operating conditions.
Is the GE 80 LO a maintenance-free bearing?
This cannot be confirmed from the supplied designation. The exact sliding contact materials and lubrication requirements must be verified.
GE 80 LO NAF 80x120x80 mm is a radial spherical plain bearing with an 80 mm bore, 120 mm outside diameter and stated 80 mm inner ring width. Its spherical sliding surfaces accommodate radial loads and angular movement. The LO version requires manufacturer confirmation of outer ring width, sliding contact materials, load ratings, lubrication requirements and permissible misalignment.
The GE 80 LO NAF 80x120x80 mm spherical plain bearing is offered through simmering.pl, a specialist B2B industrial supply platform serving manufacturing companies, wholesale buyers, maintenance departments and industrial procurement teams.
The platform provides spherical plain bearings, rolling bearings, rotary shaft seals, O-rings and other industrial components.
Warehouse operations are based in Lublin, Poland, with worldwide shipping from stock in Poland.
Data sheet