CRAFT 9588217KC - Clutch Release Thrust Bearing for T-25 Wladimirec Tractor

CRAFT 9588217KC - Clutch Release Thrust Bearing for T-25 Wladimirec Tractor

CRAFT 9588217KC is a clutch release thrust bearing intended for the clutch mechanism of the T-25 Wladimirec agricultural tractor. The base reference 9588217 is catalogued for the T-25 as an old-type clutch release bearing. The bearing operates in the clutch release mechanism and carries axial load generated when the clutch release system is actuated.

Technical data - CRAFT 9588217KC

Dimensions, load ratings, limiting speed, mass and other bearing parameters are not stated here because sufficiently reliable manufacturer data for the exact CRAFT 9588217KC version has not been confirmed.

What does CRAFT 9588217KC mean?

The product should be identified using the complete designation:

CRAFT 9588217KC

CRAFT - bearing brand.

9588217KC - complete designation used to identify this particular clutch release bearing version.

9588217 - base reference widely used in T-25 tractor spare-parts catalogues for this clutch bearing family.

For replacement selection, the full 9588217KC designation, CRAFT brand and confirmed T-25 clutch application provide more reliable identification than dimensions taken from another 9588217 variant.

Clutch release thrust bearing

CRAFT 9588217KC is not a conventional radial bearing selected only according to its bore, outside diameter and width.

It is a bearing designed specifically for the:

clutch release mechanism

When the clutch is operated, the release mechanism applies axial force through the bearing while components of the clutch assembly are rotating.

The bearing allows this force to be transmitted while accommodating the relative rotational movement required by the clutch mechanism.

For this reason, correct selection depends on:

• complete bearing reference
• bearing construction
• clutch release mechanism design
• clutch version
• confirmed T-25 application

CRAFT 9588217KC for T-25 Wladimirec

The base reference:

9588217

is catalogued as a clutch release bearing for the:

T-25 Wladimirec tractor

The product belongs to the tractor's clutch system and is used in the clutch release mechanism.

This is a catalogued application of the 9588217 bearing family, rather than a generic application inferred solely from the bearing type.

Old-type T-25 clutch release bearing

The 9588217 reference is described in agricultural spare-parts catalogues as an:

old-type clutch release bearing

This distinction can be important when selecting a replacement for a T-25 tractor.

Not every clutch release bearing advertised for a T-25 should automatically be assumed to have the same construction.

Before ordering, compare the designation and construction of the bearing removed from the tractor with the replacement part.

Construction and function

CRAFT 9588217KC is designed to transfer the axial force generated by the clutch release mechanism.

Its operating role differs from that of a conventional radial bearing supporting a rotating shaft.

During clutch operation, the release bearing forms the functional interface between the clutch actuation mechanism and rotating clutch components.

Correct operation therefore depends not only on the bearing itself but also on the condition and alignment of the surrounding clutch release components.

Alternative designations and reference numbers

Natural designation variants include:

• CRAFT 9588217KC
• 9588217KC CRAFT
• 9588217KC
• CRAFT 9588217
• 9588217 CRAFT
• 9588217

The number 9588217 is the base reference associated with this clutch bearing family.

Other suffixes and extended versions of the 9588217 reference may also occur in agricultural spare-parts catalogues. They should not automatically be treated as identical to the exact CRAFT 9588217KC version without confirming construction and dimensions.

Why dimensions are not stated as confirmed data

Different dimensional values can be found in market listings associated with the 9588217 bearing family.

This creates a risk of assigning dimensions from another 9588217 version to the exact:

CRAFT 9588217KC

For this reason, dimensions should not be used as confirmed technical data for this SKU until they are verified directly for the CRAFT 9588217KC version.

For product identification, the safer reference set is:

CRAFT + 9588217KC + clutch release bearing + T-25 Wladimirec

This avoids transferring technical parameters from a similar but potentially different bearing.

CRAFT 9588217KC vs other 9588217 variants

Bearings based on the 9588217 reference can appear with different suffixes or catalogue extensions.

A similar base number does not by itself establish complete interchangeability.

Before replacing CRAFT 9588217KC with another 9588217 version, compare:

• complete part number
• bearing construction
• actual dimensions
• clutch release interface
• clutch version
• catalogue application

This is particularly important when different sources provide conflicting dimensional information for products within the 9588217 family.

How to select the correct T-25 clutch release bearing

Before ordering a replacement, check:

• designation on the removed bearing
• complete 9588217KC reference
• base reference 9588217
• clutch mechanism version
• construction of the existing bearing
• actual dimensions if the original marking cannot be read
• confirmed application for the T-25 Wladimirec

If the existing bearing has a different suffix from 9588217KC, the two versions should be compared before installation.

Identical application does not always mean identical construction

A listing stating:

clutch bearing for T-25

is not sufficient by itself to establish interchangeability.

Different replacement parts intended for the same tractor family can differ in construction or installation details.

For reliable identification, preference should be given to the complete reference:

CRAFT 9588217KC

and the construction of the bearing already installed in the tractor.

Typical symptoms associated with clutch release bearing wear

A worn clutch release bearing may produce abnormal noise when the clutch release mechanism is operated.

However, noise or poor clutch operation does not automatically prove that the bearing itself is the only defective component.

Diagnosis should include inspection of:

• clutch release bearing
• components contacting the bearing
• clutch actuation mechanism
• guide and support surfaces
• other clutch components

This helps distinguish bearing wear from problems elsewhere in the clutch mechanism.

Installation of CRAFT 9588217KC

Before installation, clean the bearing mounting area and inspect the components cooperating with the clutch release bearing.

Check:

• correct bearing seating
• alignment
• condition of contacting components
• free operation of the release mechanism
• absence of mechanical damage

Do not apply direct impact loads to the functional bearing elements during installation.

The clutch release mechanism should move correctly after assembly without binding or abnormal resistance.

Check surrounding clutch components

Replacing the bearing alone may not correct clutch problems if other parts of the release mechanism are worn.

During replacement, inspect the condition of the associated:

• release components
• bearing support surfaces
• guides
• contact surfaces
• clutch actuation components

Excessive wear, misalignment or damaged contact surfaces can shorten the service life of a newly installed bearing.

FAQ - CRAFT 9588217KC

What is CRAFT 9588217KC?

CRAFT 9588217KC is a clutch release thrust bearing intended for the clutch mechanism of the T-25 Wladimirec agricultural tractor.

Is CRAFT 9588217KC a thrust bearing?

Yes. It functions as a clutch release thrust bearing, transmitting axial force within the clutch release mechanism.

Does 9588217KC fit the T-25 Wladimirec?

The 9588217 bearing family is catalogued for the T-25 Wladimirec clutch system, and 9588217KC is offered as a CRAFT version for this application. The clutch version and existing bearing should still be checked before installation.

What is the difference between 9588217 and 9588217KC?

9588217 is the base reference used for this clutch bearing family. 9588217KC is a more specific designation identifying a particular version. The complete reference should be used whenever possible.

Is 9588217KC an old-type T-25 clutch bearing?

The base 9588217 reference is catalogued as an old-type clutch release bearing for the T-25.

What are the dimensions of CRAFT 9588217KC?

Dimensions are intentionally not stated as confirmed specifications here because market sources provide conflicting dimensional data for the 9588217 family. Dimensions should be verified directly for the exact CRAFT 9588217KC version.

Are all 9588217 bearings interchangeable?

This should not be assumed. Variants sharing the 9588217 base reference may differ in construction, dimensions or suffix. The complete designation and physical construction should be compared before substitution.

Can another T-25 clutch release bearing replace 9588217KC?

Only after confirming the bearing construction, dimensions, clutch release interface and application. A general description such as "for T-25" does not by itself confirm full interchangeability.

CRAFT 9588217KC - key information

CRAFT 9588217KC is a clutch release thrust bearing for the T-25 Wladimirec agricultural tractor. The base 9588217 reference is catalogued as an old-type T-25 clutch release bearing. Replacement selection should be based on the complete designation and clutch mechanism version because different 9588217 variants may not be technically identical.

Availability from simmering.pl

CRAFT 9588217KC clutch release bearing for the T-25 Wladimirec is available from simmering.pl for agricultural equipment maintenance, repair workshops, technical procurement, distributors and B2B customers.

Products are supplied from stock in Poland, with worldwide shipping available. simmering.pl specialises in industrial bearings, agricultural bearing applications and technical sealing solutions.