CRAFT 51101 12x26x9 mm single direction thrust ball bearing from the 511 series. Inside diameter 12 mm, outside diameter 26 mm and overall height 9 mm. Separable construction with shaft washer, housing washer and ball-and-cage assembly. Designed for axial loads acting in one direction; not suitable for radial loads. Open construction requiring lubrication. Specialist B2B industrial trading platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Brand |
CRAFT |
|
Full designation |
51101 |
|
Bearing type |
Thrust ball bearing |
|
Construction |
Single direction |
|
Dimensional series |
511 |
|
Inside diameter (d) |
12 mm |
|
Outside diameter (D) |
26 mm |
|
Overall height (H) |
9 mm |
|
Rolling elements |
Balls |
|
Number of ball rows |
1 |
|
Axial load direction |
One direction |
|
Radial load capacity |
None |
|
Separable construction |
Yes |
|
Sealing arrangement |
Open, without integrated seals |
|
Lubrication |
Oil or grease |
|
Nominal dimensions |
12x26x9 mm |
The basic dynamic load rating C, basic static load rating C0, fatigue load limit Pu, limiting speed, bearing weight and cage material must be confirmed using the manufacturer's technical documentation for the exact CRAFT 51101 version.
|
Designation element |
Technical meaning |
|---|---|
|
5 |
Thrust ball bearing |
|
51 |
Single direction thrust ball bearing |
|
511 |
Thrust ball bearing dimensional series |
|
01 |
Bore code corresponding to 12 mm |
|
CRAFT |
Bearing brand |
The 511 series includes thrust ball bearings designed to accommodate axial loads acting in one direction.
Unlike radial bearings, their ball raceways are located on the axial faces of two washers.
The load is transmitted along the axis of rotation, allowing these bearings to provide axial shaft support.
Bore code 01 indicates a nominal bore diameter of 12 mm.
The standard bearing designation system includes the following exceptions:
|
Bore code |
Nominal diameter |
|---|---|
|
00 |
10 mm |
|
01 |
12 mm |
|
02 |
15 mm |
|
03 |
17 mm |
For standard bore codes 04 and above, the nominal bore diameter is generally calculated by multiplying the code by 5.
The 51101 designation does not contain additional symbols identifying a special cage design, precision class or material modifications.
Therefore, a specific cage material must not be assigned to this product without confirmation from CRAFT technical documentation.
The shaft washer operates with the rotating shaft and transmits axial force to the balls.
Its axial face contains the raceway on which the rolling elements operate.
The washer must be correctly supported and positioned relative to the shaft axis.
The housing washer operates against the stationary part of the assembly, usually the housing.
It transfers axial loading from the balls to the supporting surface of the equipment.
Adequate rigidity and perpendicularity of the supporting surface are important for correct load distribution.
The balls transmit forces between the shaft washer and housing washer.
Their arrangement allows axial loading but does not provide radial load capacity.
The cage maintains appropriate spacing between the balls and prevents direct contact between adjacent rolling elements.
The cage material and detailed construction require confirmation for the specific CRAFT 51101 product.
The bearing consists of three main components:
Shaft washer.
Ball-and-cage assembly.
Housing washer.
These components can be separated during installation.
This facilitates mounting but does not mean that parts from different bearings can be combined indiscriminately.
CRAFT 51101 accommodates loads acting parallel to the shaft axis.
Force is transmitted through the shaft washer, balls and housing washer.
This is the fundamental mechanical function of a thrust bearing.
The 51101 bearing is a single direction design.
This means it can accommodate axial force acting in only one direction.
It cannot independently provide axial shaft location when forces alternate between opposite directions.
In such applications, an appropriately arranged pair of single direction bearings or a double direction thrust bearing is required.
CRAFT 51101 is not designed to accommodate radial loads.
If the shaft is also subjected to radial forces, a separate bearing arrangement must provide radial guidance.
The 51101 bearing should not be the only component responsible for shaft location.
Thrust ball bearings require an appropriate minimum axial load, particularly at higher rotational speeds.
Insufficient loading may cause ball skidding and unfavourable rolling conditions.
The required minimum load must be determined according to the manufacturer's recommendations.
The nominal bore diameter is 12 mm.
Bearing selection must consider the shaft dimensions and the mounting arrangement of the shaft washer.
The outside diameter is 26 mm.
This dimension determines the main radial installation space required for the bearing.
The overall height of the complete bearing is 9 mm.
This must not be confused with the thickness of an individual washer.
The bearing arrangement must also provide suitable supporting surfaces and mounting conditions.
CRAFT 51101 has no integrated seals.
Protection against contamination must be provided by the equipment design or additional sealing components.
The bearing may operate with grease lubrication under suitable operating conditions.
Grease selection should consider temperature, rotational speed, loading and operating frequency.
Oil lubrication is also possible.
An adequate lubricant supply must reach the contact surfaces between the balls and raceways.
Permissible rotational speed depends on axial loading, lubrication, temperature and cage construction.
The limiting speed must be confirmed using CRAFT catalogue data.
The permissible temperature range depends on bearing materials, lubricant and operating conditions.
Specific temperature limits must not be assigned without manufacturer data.
Common designation variations include:
CRAFT 51101
51101 CRAFT
51101 12x26x9
CRAFT 51101 thrust bearing
51101 thrust ball bearing
Axial ball bearing 12x26x9
CRAFT 51101 single direction thrust ball bearing
51101 single direction thrust bearing
|
Manufacturer |
Basic designation |
Dimensions |
|---|---|---|
|
CRAFT |
51101 |
12x26x9 mm |
|
SKF |
51101 |
12x26x9 mm |
|
FAG |
51101 |
12x26x9 mm |
|
NSK |
51101 |
12x26x9 mm |
|
NTN |
51101 |
12x26x9 mm |
|
KOYO |
51101 |
12x26x9 mm |
|
ZKL |
51101 |
12x26x9 mm |
The table presents basic dimensional compatibility within the 51101 series.
It does not confirm complete technical interchangeability between all versions.
Before selecting a replacement, check load ratings, tolerances, cage construction and mounting requirements.
|
Designation |
Inside diameter |
Outside diameter |
Height |
|---|---|---|---|
|
51100 |
10 mm |
24 mm |
9 mm |
|
51101 |
12 mm |
26 mm |
9 mm |
|
51102 |
15 mm |
28 mm |
9 mm |
|
51103 |
17 mm |
30 mm |
9 mm |
|
51104 |
20 mm |
35 mm |
10 mm |
All listed bearings belong to the same construction family.
However, their mounting diameters differ, so they are not directly interchangeable.
|
Feature |
CRAFT 51101 |
Bearing 6001 |
|---|---|---|
|
Bearing type |
Thrust ball bearing |
Deep groove ball bearing |
|
Dimensions |
12x26x9 mm |
12x28x8 mm |
|
Primary loading |
Axial |
Radial |
|
Axial load direction |
One direction |
Both directions, within design limits |
|
Radial load capacity |
None |
Yes |
|
Construction |
Separable |
Non-separable |
|
Primary function |
Axial support |
Shaft guidance |
Both bearings have a nominal bore diameter of 12 mm but differ in construction, external dimensions and function.
They are not interchangeable.
Before purchasing or installing the bearing, verify:
Complete designation 51101.
Inside diameter of 12 mm.
Outside diameter of 26 mm.
Overall height of 9 mm.
Direction of axial loading.
Maximum axial force.
Minimum required axial load.
Dynamic and static load ratings.
Rotational speed.
Lubrication method.
Washer support arrangement.
Perpendicularity of supporting surfaces.
Alignment of components.
Method of accommodating radial loads.
Operating temperature and environmental conditions.
The primary selection criteria are unidirectional axial loading and the provision of independent radial shaft guidance.
Thrust ball bearings of the 511 series are used in mechanisms requiring axial support of rotating components.
Typical application areas include:
Small mechanical gearboxes.
Adjustment mechanisms.
Lead screw assemblies.
Axial shaft support arrangements.
Workshop equipment.
Manufacturing machinery.
Lifting mechanisms.
Compact industrial equipment.
These applications refer to the general thrust bearing family and do not represent a confirmed list of equipment fitted with the specific CRAFT 51101 model.
Before installation, clean the shaft, housing and axial supporting surfaces.
Remove contamination, burrs and traces of corrosion.
The shaft washer must be installed according to the equipment's design requirements.
It should be properly supported and aligned with the axis of rotation.
The housing washer must be positioned against the appropriate supporting surface.
Uneven support may result in unfavourable load distribution.
The ball-and-cage assembly must be placed between the corresponding raceways.
Damage to the rolling elements must be avoided during installation.
The washers must be correctly aligned relative to the shaft axis.
The bearing is not designed to compensate for substantial misalignment.
During operation, temperature, noise, vibration and lubrication condition should be monitored.
Incorrect operating conditions may lead to accelerated wear of the raceways and balls.
The bearing has an inside diameter of 12 mm, an outside diameter of 26 mm and an overall height of 9 mm.
Yes. It is a single direction thrust ball bearing, also known as an axial ball bearing.
The bearing accommodates axial loads in one direction. It is not designed to support radial loads.
Not as a single bearing. An appropriately arranged pair of single direction bearings or a double direction thrust bearing is required.
Yes. It consists of a shaft washer, housing washer and ball-and-cage assembly that can be separated during installation.
No. It is an open bearing requiring lubrication and protection against contamination.
Both designations refer to the same basic dimensional series, measuring 12x26x9 mm. However, technical specifications and mounting requirements must be checked before substitution.
No. Bearing 51101 is a thrust bearing, whereas 6001 is a deep groove ball bearing with different dimensions and a different intended function.
CRAFT 51101 is a single direction thrust ball bearing with dimensions of 12x26x9 mm. Its separable construction includes a shaft washer, housing washer and ball-and-cage assembly. It accommodates axial loads acting in one direction but is not designed to support radial loads. Proper support, alignment and lubrication are essential for reliable operation.
The specialist B2B industrial trading platform simmering.pl supplies CRAFT bearings for industrial, maintenance and technical applications, supporting component selection based on complete catalogue designations, dimensions and operating requirements, with worldwide shipping from stock in Poland.
Data sheet