CRAFT 51100 10x24x9 mm – Single Direction Thrust Ball Bearing
search
  • Thrust Ball Bearing 51100 CRAFT 10x24x9 – One-Way Axial Load Bearing
  • CRAFT 51100 10x24x9 mm – Single Direction Thrust Ball Bearing

CRAFT 51100 10x24x9 mm – Single Direction Thrust Ball Bearing

3005 pcs.
€0.33 (net)
Price for: 1pcs.

CRAFT 51100 10x24x9 mm single direction thrust ball bearing from the 511 series. Inside diameter 10 mm, outside diameter 24 mm and overall height 9 mm. Separable construction with shaft washer, housing washer and ball-and-cage assembly. Designed for axial loads acting in one direction; not suitable for radial loads. Open construction requiring lubrication. Specialist B2B industrial trading platform simmering.pl, with worldwide shipping from stock in Poland.

Quantity

Technical Specifications

Parameter

Specification

Brand

CRAFT

Full designation

51100

Bearing type

Thrust ball bearing

Construction

Single direction

Dimensional series

511

Inside diameter (d)

10 mm

Outside diameter (D)

24 mm

Overall height (H)

9 mm

Rolling elements

Balls

Number of ball rows

1

Axial load direction

One direction

Radial load capacity

None

Separable construction

Yes

Sealing arrangement

Open, without integrated seals

Lubrication

Grease or oil

Nominal dimensions

10x24x9 mm

The basic dynamic load rating C, basic static load rating C0, permissible rotational speed, bearing weight, cage material and detailed tolerances must be confirmed using CRAFT technical documentation for the exact 51100 designation. Specifications from other manufacturers must not be assigned to this version without verification.

Understanding the CRAFT 51100 Designation

Designation element

Meaning

5

Thrust ball bearing family

51

Single direction thrust ball bearing

511

Thrust bearing dimensional series

00

Bore code corresponding to 10 mm

CRAFT

Bearing brand

Series 511

The 511 series includes single direction thrust ball bearings whose primary function is to accommodate forces acting parallel to the shaft axis.

Unlike deep groove ball bearings, their raceways are located on the axial faces of the bearing washers.

This geometry provides axial support for rotating components.

Bore Code 00

Bore code 00 corresponds to a nominal bore diameter of 10 mm.

This is one of the exceptions in the standard bearing bore designation system:

  • 00 = 10 mm.

  • 01 = 12 mm.

  • 02 = 15 mm.

  • 03 = 17 mm.

For codes 04 and above, the nominal bore diameter is generally calculated by multiplying the code by 5.

Absence of Additional Suffixes

The 51100 designation does not contain suffixes identifying a special cage construction, precision class or other modifications.

Therefore, a specific cage material should not automatically be assigned to the product without confirmation from the manufacturer.

CRAFT 51100 Bearing Construction

Shaft Washer

The shaft washer operates with the rotating shaft.

Its axial face contains a ball raceway through which axial loading is transmitted to the rolling elements.

Correct support of the washer is important for uniform load distribution.

Housing Washer

The housing washer operates against the stationary part of the assembly, usually the housing.

It transmits axial force from the balls to the corresponding supporting surface.

This surface should provide proper support and adequate perpendicularity to the shaft axis.

Balls

The balls transmit loads between the shaft washer and housing washer.

In a thrust bearing, their arrangement is designed for axial rather than radial loading.

Cage

The cage maintains appropriate spacing between the balls and limits direct contact between adjacent rolling elements.

Its exact design and material should be confirmed using the technical documentation for CRAFT 51100.

Separable Construction

The bearing consists of three principal components:

  • Shaft washer.

  • Ball-and-cage assembly.

  • Housing washer.

The separable design facilitates installation and inspection of individual components.

However, it does not mean that components from different manufacturers can be combined indiscriminately.

Axial and Radial Loads

Axial Loads

CRAFT 51100 is designed to accommodate forces acting along the shaft axis.

The load is transmitted through the shaft washer, balls and housing washer.

This construction is suitable for mechanisms requiring axial support of rotating components.

Single Direction Operation

The bearing accommodates axial loading in one direction only.

It cannot independently provide axial shaft location when forces act alternately in opposite directions.

If the arrangement requires axial load capacity in both directions, an appropriate double direction design or two correctly arranged single direction bearings must be used.

No Radial Load Capacity

CRAFT 51100 is not designed to accommodate radial loads.

If radial forces also act on the shaft, they must be supported by a separate bearing arrangement.

The 51100 bearing cannot replace a deep groove ball bearing or another radial bearing.

Minimum Axial Load

Thrust ball bearings require an appropriate minimum axial load during operation, particularly at higher rotational speeds.

Insufficient loading may cause ball skidding and unfavourable rolling conditions.

The minimum required load must be determined from the manufacturer's recommendations and operating conditions.

Dimensions and Mounting Significance

Inside Diameter: 10 mm

The nominal bore diameter is 10 mm.

During installation, compatibility between the shaft and shaft washer must be checked, together with the mounting clearance requirements.

Outside Diameter: 24 mm

The outside diameter of 24 mm defines the main radial mounting dimension.

Proper support of the housing washer is important.

Overall Height: 9 mm

The height of 9 mm refers to the complete bearing.

It is not the thickness of an individual washer.

When designing the bearing arrangement, the overall axial installation space and supporting surfaces must be considered.

Lubrication and Operating Conditions

Open Construction

The 51100 bearing features an open construction without integrated seals.

Protection against dust, moisture and other contaminants should be provided by the surrounding machine assembly.

Grease Lubrication

Grease lubrication may be used under suitable operating conditions.

Grease selection should consider loading, temperature, rotational speed and operating frequency.

Oil Lubrication

In applications requiring oil lubrication, an adequate supply of lubricant must reach the raceways and balls.

The oil type should be selected according to operating conditions.

Rotational Speed

Permissible rotational speed depends on axial loading, lubrication, temperature and cage construction.

It must not be determined solely from the nominal dimensions of 10x24x9 mm.

Operating Temperature

The operating temperature range depends on the bearing materials, lubricant and operating conditions.

Temperature limits must be confirmed using CRAFT technical documentation.

Alternative Designations and Reference Numbers

The following designation variations may appear in catalogues and search results:

  • CRAFT 51100

  • 51100 CRAFT

  • 51100 10x24x9

  • CRAFT 51100 thrust bearing

  • 51100 thrust ball bearing

  • Axial ball bearing 10x24x9

  • CRAFT 51100 single direction thrust ball bearing

  • 51100 single direction axial bearing

Dimensional Equivalents from Other Manufacturers

Manufacturer

Basic designation

Dimensions

CRAFT

51100

10x24x9 mm

SKF

51100

10x24x9 mm

FAG

51100

10x24x9 mm

NSK

51100

10x24x9 mm

NTN

51100

10x24x9 mm

KOYO

51100

10x24x9 mm

ZKL

51100

10x24x9 mm

The table indicates matching basic designations and nominal dimensions within the 51100 series.

It does not establish complete technical interchangeability between all versions.

Before selecting a replacement, compare load ratings, tolerances, cage construction and mounting requirements.

CRAFT 51100 Compared with Other 511 Series Bearings

Designation

Inside diameter

Outside diameter

Height

51100

10 mm

24 mm

9 mm

51101

12 mm

26 mm

9 mm

51102

15 mm

28 mm

9 mm

51103

17 mm

30 mm

9 mm

51104

20 mm

35 mm

10 mm

These bearings belong to the same construction series but differ in mounting dimensions.

They are not directly interchangeable.

CRAFT 51100 vs Deep Groove Ball Bearing 6000

Feature

CRAFT 51100

Bearing 6000

Bearing type

Thrust ball bearing

Deep groove ball bearing

Dimensions

10x24x9 mm

10x26x8 mm

Primary loading

Axial

Radial

Axial load direction

One direction

Both directions, within design limits

Radial load capacity

None

Yes

Construction

Separable

Non-separable

Function

Axial support

Shaft guidance

Bearings 51100 and 6000 have the same nominal bore diameter of 10 mm but differ in construction, dimensions and intended function.

They are not interchangeable.

Selection and Interchangeability of CRAFT 51100

Before purchasing or installing the bearing, verify:

  • Complete designation 51100.

  • Inside diameter of 10 mm.

  • Outside diameter of 24 mm.

  • Overall height of 9 mm.

  • Direction of axial loading.

  • Maximum axial load.

  • Minimum required axial load.

  • Dynamic and static load ratings.

  • Rotational speed.

  • Lubrication method.

  • Washer supporting conditions.

  • Perpendicularity of supporting surfaces.

  • Alignment requirements.

  • Method of accommodating radial loads.

  • Operating temperature and environmental conditions.

The most important construction characteristic is the ability to accommodate axial loads in one direction, without radial load capacity.

CRAFT 51100 Bearing Applications

Thrust ball bearings of the 511 series are used in mechanisms requiring axial support of a shaft or rotating component.

Typical applications for this bearing construction include:

  • Small mechanical gearboxes.

  • Adjustment mechanisms.

  • Lead screw assemblies.

  • Axial shaft support units.

  • Workshop equipment.

  • Manufacturing machinery.

  • Lifting mechanisms.

  • Industrial equipment with limited mounting space.

These are characteristic applications of thrust ball bearings and do not represent a confirmed list of equipment fitted with the specific CRAFT 51100 model.

Installation and Operation

Mounting Surface Preparation

Before installation, inspect the shaft, housing and axial supporting surfaces.

Surfaces should be clean and free from burrs, corrosion and damage.

Shaft Washer Installation

The shaft washer must be installed according to the equipment design.

Proper support and correct positioning relative to the shaft axis are essential.

Housing Washer Installation

The housing washer should be supported by the corresponding housing surface.

Incorrect support may cause uneven loading of the raceways.

Ball Assembly Installation

The ball-and-cage assembly must be positioned between the corresponding raceways.

Rolling elements must be protected against damage and contamination during installation.

Alignment Verification

The bearing requires correct alignment of the washers relative to the shaft axis.

It is not designed to compensate for substantial misalignment.

Operating Condition Monitoring

During operation, temperature, noise, vibration and lubrication condition should be monitored.

Excessive vibration or temperature increases may indicate incorrect loading, installation errors or lubrication problems.

FAQ – Frequently Asked Questions

What are the dimensions of CRAFT 51100?

The bearing has an inside diameter of 10 mm, an outside diameter of 24 mm and an overall height of 9 mm.

Is CRAFT 51100 a thrust bearing?

Yes. It is a single direction thrust ball bearing, also known as an axial ball bearing.

What loads can CRAFT 51100 accommodate?

The bearing accommodates axial loads acting in one direction. It is not designed to support radial loads.

Can CRAFT 51100 operate with axial loads in both directions?

Not as a single bearing. An appropriately designed pair of single direction bearings or a double direction thrust bearing is required to accommodate axial forces in both directions.

Is CRAFT 51100 separable?

Yes. The shaft washer, housing washer and ball-and-cage assembly can be separated during installation.

Does CRAFT 51100 have integrated seals?

No. It is an open bearing requiring appropriate lubrication and protection against contamination.

Can SKF 51100 replace CRAFT 51100?

Both designations refer to the same basic dimensional series, measuring 10x24x9 mm. However, technical specifications, tolerances and mounting requirements must be compared before substitution.

Can CRAFT 51100 be replaced with bearing 6000?

No. Bearing 51100 is designed for axial loads, whereas 6000 is a deep groove ball bearing with different dimensions and a different mechanical function.

CRAFT 51100 10x24x9 – Key Information

CRAFT 51100 is a single direction thrust ball bearing measuring 10x24x9 mm. It consists of a shaft washer, housing washer and ball-and-cage assembly. The bearing accommodates axial loads in one direction but is not designed to support radial loads. Its separable, open construction requires proper support, alignment and lubrication for reliable operation.

The specialist B2B industrial trading platform simmering.pl supplies CRAFT bearings for industrial, maintenance and technical applications, supporting component selection based on complete catalogue designations, dimensions and operating requirements, with worldwide shipping from stock in Poland.

CRAFT
51100 CRAFT
3005 pcs.

Data sheet

Diameter in. (mm)
10
Diameter out. (mm)
24
Height (mm)
9
Mark
CRAFT