ZKL 51144 220x270x37 mm single direction thrust ball bearing from the 511 series. Inside diameter 220 mm, outside diameter 270 mm and overall height 37 mm. Separable construction with shaft washer, housing washer and ball-and-cage assembly. Designed for axial loads acting in one direction; not suitable for radial loads. Open construction requiring lubrication. Specialist B2B industrial trading platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Manufacturer / brand |
ZKL |
|
Full designation |
51144 |
|
Bearing type |
Thrust ball bearing |
|
Construction |
Single direction |
|
Dimensional series |
511 |
|
Inside diameter (d) |
220 mm |
|
Outside diameter (D) |
270 mm |
|
Overall height (H) |
37 mm |
|
Rolling elements |
Balls |
|
Number of ball rows |
1 |
|
Axial load directions |
1 |
|
Radial load capacity |
None |
|
Separable construction |
Yes |
|
Sealing arrangement |
Open, without integrated seals |
|
Lubrication |
Oil or grease |
|
Nominal dimensions |
220x270x37 mm |
The basic dynamic load rating C, basic static load rating C0, fatigue load limit Pu, permissible rotational speed, bearing weight and detailed cage construction must be confirmed using current ZKL technical documentation for the exact 51144 designation.
|
Designation element |
Technical meaning |
|---|---|
|
5 |
Thrust ball bearing |
|
51 |
Single direction thrust ball bearing family |
|
511 |
Dimensional series |
|
44 |
Bore code corresponding to 220 mm |
|
ZKL |
Manufacturer's brand |
The 511 series includes single direction thrust ball bearings designed to accommodate axial loads.
Their construction differs from conventional deep groove ball bearings because the raceways are shaped to transmit forces acting along the shaft axis.
For ZKL 51144, the nominal dimensions are:
Inside diameter: 220 mm.
Outside diameter: 270 mm.
Overall height: 37 mm.
In the standard bearing designation system, bore code 44 corresponds to a nominal diameter of 220 mm.
44 x 5 = 220 mm.
The 51144 designation does not contain additional suffixes identifying a special cage design, precision class or other construction modifications.
Therefore, a specific cage material or non-standard operating characteristics should not be assigned to this product without confirmation from the manufacturer's catalogue.
The shaft washer is designed to operate with the shaft and typically rotates together with it.
Its raceway transmits axial loading to the balls.
Correct washer support is important for uniform load distribution and bearing service life.
The housing washer operates against the corresponding axial locating surface of the housing.
It transfers axial force from the ball assembly to the stationary part of the mechanical structure.
The supporting surface should provide adequate rigidity and perpendicularity to the axis of rotation.
The balls are the rolling elements responsible for transmitting loads between the shaft washer and housing washer.
Their arrangement allows axial forces acting in one direction to be accommodated.
The construction is not designed to support radial loads.
The cage maintains appropriate spacing between the balls and limits direct contact between adjacent rolling elements.
The exact cage material and construction must be confirmed in the technical documentation for the specific ZKL 51144 bearing.
The bearing consists of three principal components:
Shaft washer.
Ball-and-cage assembly.
Housing washer.
The separable design facilitates installation and inspection of individual components.
However, it does not mean that washers and ball assemblies from different manufacturers can be combined indiscriminately.
ZKL 51144 is designed to accommodate loads acting parallel to the shaft axis.
Axial force is transmitted through the shaft washer, balls and housing washer.
This load transmission arrangement is characteristic of thrust ball bearings.
The 51144 bearing accommodates axial loading in only one direction.
It cannot independently locate a shaft when axial loads alternate between opposite directions.
If the mechanical arrangement requires bidirectional axial load capacity, an appropriately designed pair of single direction bearings or a double direction thrust bearing should be used.
ZKL 51144 is not designed to accommodate radial loads.
In an arrangement subjected to both radial and axial forces, radial loads must be supported by another bearing or a suitable shaft-guiding component.
The 51144 bearing must not be used as the sole component responsible for radial shaft location.
Thrust ball bearings require an appropriate minimum axial load during operation, particularly at higher rotational speeds.
Insufficient loading may cause unfavourable rolling conditions and rolling element skidding.
The required minimum load should be determined according to the manufacturer's recommendations.
The nominal inside diameter is 220 mm.
Bearing selection must consider how the shaft washer is mounted and how it interacts with the shaft.
The 270 mm outside diameter defines the principal mounting dimension of the housing washer.
This dimension is important when designing the housing seat and axial supporting surface.
The overall height of 37 mm represents the axial dimension of the complete bearing.
It must not be confused with the thickness of an individual washer.
The design of the bearing arrangement must also consider axial supporting surfaces and installation requirements.
ZKL 51144 features an open construction.
It requires appropriate lubrication and protection against contamination provided by the surrounding mechanical assembly.
Oil lubrication is possible in suitable applications.
The oil must reach the contact areas between the balls and raceways to maintain appropriate operating conditions.
The bearing may also operate with grease lubrication when permitted by the operating conditions.
Grease selection depends on load, temperature, rotational speed and equipment operating frequency.
Thrust ball bearings have rotational speed limitations resulting from their construction and load transmission characteristics.
The permissible speed of ZKL 51144 must not be determined solely from its dimensions.
The permissible operating temperature depends on bearing construction, cage material, lubricant and mounting conditions.
The temperature range should be confirmed using the manufacturer's documentation.
Common designation variations include:
ZKL 51144
51144 ZKL
51144 220x270x37
ZKL 51144 thrust ball bearing
Thrust bearing 220x270x37
Single direction thrust bearing 51144
ZKL 51144 axial ball bearing
51144 single direction thrust ball bearing
|
Manufacturer |
Basic designation |
Dimensions |
|---|---|---|
|
ZKL |
51144 |
220x270x37 mm |
|
SKF |
51144 |
220x270x37 mm |
|
FAG |
51144 |
220x270x37 mm |
|
NSK |
51144 |
220x270x37 mm |
|
NTN |
51144 |
220x270x37 mm |
|
KOYO |
51144 |
220x270x37 mm |
The table presents the basic designation and nominal dimensional compatibility of the 51144 series.
It does not confirm complete technical interchangeability between specific bearing versions.
Before selecting a replacement, compare load ratings, tolerances, cage construction, mounting dimensions and operating requirements.
|
Designation |
Inside diameter |
Outside diameter |
Height |
|---|---|---|---|
|
51140 |
200 mm |
250 mm |
37 mm |
|
51142 |
210 mm |
260 mm |
37 mm |
|
51144 |
220 mm |
270 mm |
37 mm |
|
51148 |
240 mm |
300 mm |
45 mm |
All listed bearings belong to the same construction family but differ in mounting dimensions.
They are not directly interchangeable.
|
Feature |
ZKL 51144 |
Deep groove ball bearing |
|---|---|---|
|
Bearing type |
Thrust ball bearing |
Radial ball bearing |
|
Primary loading |
Axial |
Radial |
|
Axial load direction |
One direction |
Both directions, within design limits |
|
Radial load capacity |
None |
Yes |
|
Construction |
Separable |
Usually non-separable |
|
Radial shaft location |
Requires additional bearing support |
Can provide radial shaft location |
|
Typical function |
Axial support |
Rotational shaft guidance |
These bearings perform different mechanical functions and should not be considered direct substitutes.
Before purchasing or installing the bearing, verify:
Complete designation 51144.
Nominal inside diameter of 220 mm.
Outside diameter of 270 mm.
Overall height of 37 mm.
Direction of axial loading.
Maximum and minimum axial loads.
Required dynamic and static load ratings.
Rotational speed.
Lubricant type and lubrication method.
Alignment requirements.
Perpendicularity of axial supporting surfaces.
Method of supporting radial loads.
Operating temperature and environmental conditions.
In applications requiring precise shaft guidance, separate radial bearing support must be provided.
Thrust ball bearings of the 511 series are used in mechanisms where axial loads acting in one direction are predominant.
Typical applications include:
Industrial vertical shaft assemblies.
Lifting mechanisms.
Lead screw assemblies.
Presses and processing equipment.
Adjustment mechanisms.
Industrial conveying equipment.
Manufacturing machinery.
Power transmission assemblies requiring axial support.
These are characteristic applications of thrust ball bearings and do not represent a confirmed list of equipment fitted with the specific ZKL 51144 model.
Before installation, inspect the shaft, housing and axial supporting surfaces.
Surfaces should be clean and free from burrs and damage.
The shaft washer must be mounted according to the equipment's design requirements.
Proper support and correct interaction with the shaft are essential.
The housing washer must be correctly supported by the housing surface.
Uneven support may lead to unfavourable load distribution across the raceways.
The ball-and-cage assembly must be positioned between the corresponding raceways.
Contamination and mechanical damage to the rolling elements must be avoided during installation.
Thrust ball bearings require appropriate alignment of the mating components.
They are not designed to compensate for substantial misalignment between the shaft and housing.
During operation, temperature, noise, vibration and lubrication condition should be monitored.
Incorrect operating conditions may cause increased friction, raceway damage and premature wear.
The bearing has an inside diameter of 220 mm, an outside diameter of 270 mm and an overall height of 37 mm.
Yes. It is a single direction thrust ball bearing, also referred to as an axial ball bearing.
The bearing accommodates axial loads acting in one direction. It is not designed to support radial loads.
Not as a single bearing. An appropriately designed bearing arrangement or a double direction thrust bearing is required to accommodate axial forces acting in both directions.
Yes. The shaft washer, housing washer and ball-and-cage assembly can be separated during installation.
No. It is an open bearing requiring appropriate lubrication and protection against contamination.
Both designations refer to the same basic dimensional series, measuring 220x270x37 mm. However, technical specifications, tolerances and operating requirements must be compared before substitution.
Yes, if the shaft is subjected to radial loads or requires radial guidance. The 51144 bearing provides axial support rather than radial shaft location.
ZKL 51144 is a single direction thrust ball bearing with dimensions of 220x270x37 mm. Its separable construction consists of a shaft washer, housing washer and ball-and-cage assembly. The bearing accommodates axial loads in one direction but is not designed to support radial loads. Proper axial support, alignment and lubrication are essential for reliable operation and service life.
The specialist B2B industrial trading platform simmering.pl supplies ZKL bearings for industrial, maintenance and technical applications, supporting component selection based on complete catalogue designations, dimensions and operating requirements, with worldwide shipping from stock in Poland.
Data sheet