GRN COMBI 50x65x18 mm NBR combined rotary shaft oil seal with a 50 mm inside diameter, 65 mm outside diameter and 18 mm width. The COMBI construction combines lubricant retention with additional protection against external contamination. NBR elastomer provides good resistance to many mineral oils and industrial greases. Designed for appropriately selected sealing assemblies in machinery and gearboxes. Available through the specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Brand |
GRN |
|
Product designation |
COMBI 50x65x18 |
|
Product type |
Rotary shaft oil seal |
|
Design |
COMBI - combined sealing construction |
|
Elastomer material |
NBR - nitrile butadiene rubber |
|
Inside diameter d |
50 mm |
|
Outside diameter D |
65 mm |
|
Width B |
18 mm |
|
Dimensions d x D x B |
50x65x18 mm |
|
Function |
Shaft sealing and protection against contamination |
|
Type of movement |
Rotary motion |
|
Operating environment |
Dependent on NBR compatibility and seal design |
The exact sealing lip geometry, presence of a garter spring, protective ring construction and permissible operating parameters must be confirmed against the technical documentation for the specific GRN COMBI version.
GRN is a brand of technical sealing products, including rotary shaft seals in standard configurations and specialised designs.
The product range includes sealing solutions for rotating shafts used in industrial machinery and mechanical assemblies.
The COMBI designation refers to a category of seals combining the primary shaft sealing function with an additional protective element.
Unlike conventional radial shaft seals, COMBI designs are intended for applications where preventing lubricant leakage and protecting against external contamination are both important.
The detailed arrangement of sealing components depends on the specific design.
The COMBI designation alone does not conclusively identify the number of sealing lips, spring configuration or geometry of the individual rings.
50 mm - nominal shaft diameter.
65 mm - nominal housing bore diameter.
18 mm - nominal axial width of the seal.
All three dimensions must match the requirements of the specific sealing assembly.
NBR, or nitrile butadiene rubber, is an elastomer widely used in industrial sealing applications.
Depending on its formulation, NBR generally offers good resistance to many mineral oils, greases and selected technical fluids.
However, NBR is not universally resistant to all fuels, solvents, environmental conditions or elevated temperatures.
Material compatibility must always be evaluated for the actual operating medium and conditions.
The primary function of the seal is to limit lubricant leakage where a rotating shaft passes through a housing.
The flexible sealing element operates against the shaft surface, forming a barrier that helps retain oil or grease within the mechanical assembly.
Sealing performance depends on correct geometry, shaft surface quality, lubrication and operating conditions.
A characteristic function of the COMBI construction is the additional protection provided to the sealing area against external contaminants.
Depending on the specific design, the protective element may help limit the ingress of:
Dust and airborne particles.
Fine solid contaminants.
Mud and operating debris.
Water splashes.
Contaminants present around the rotating shaft.
The actual level of protection depends on the construction and operating environment.
Additional contamination protection should not be interpreted as a guarantee of complete watertightness.
The GRN COMBI 50x65x18 mm NBR seal is intended for installation on a shaft with a nominal diameter of 50 mm.
Correct operation requires an appropriate shaft contact surface, suitable alignment and controlled radial runout.
Surface scratches, corrosion or excessive wear may accelerate deterioration of the sealing element.
|
Feature |
GRN COMBI |
GRN AO/TC |
|---|---|---|
|
Construction |
Combined sealing design |
Standard double-lip rotary shaft seal |
|
Primary sealing function |
Yes |
Yes |
|
Additional protection |
Protective element incorporated into the COMBI design |
Auxiliary dust lip |
|
Intended use |
Applications requiring additional contamination protection |
Conventional rotary shaft sealing applications |
|
Installation |
Depends on the specific COMBI construction |
Depends on the AO/TC design |
|
Interchangeability |
Requires verification of construction and geometry |
Requires verification of construction and geometry |
Important: A COMBI seal is not automatically interchangeable with a conventional AO/TC rotary shaft seal, even when the inside and outside diameters are identical.
Differences may include overall width, protective element construction, sealing contact positions and installation requirements.
COMBI and KASSETTE seals belong to categories of more complex rotary shaft sealing solutions.
Both types may be used in mechanical assemblies requiring additional protection against contamination, but they are not necessarily identical in construction.
A cassette seal may incorporate integrated mating components that form a dedicated sealing contact system.
In COMBI seals, the detailed internal arrangement depends on the specific version.
When selecting a replacement, the cross-sectional construction and installation requirements should be compared rather than relying solely on the seal type designation.
COMBI rotary shaft seals may be used in mechanical systems exposed to lubricants and external contaminants.
Typical application areas include:
Mechanical gearboxes and drive assemblies.
Gearbox output shafts.
Agricultural machinery mechanisms.
Construction machinery and working equipment.
Power transmission assemblies.
Industrial machinery sealing arrangements.
Equipment operating in dusty environments.
These are typical application areas for COMBI sealing constructions, not confirmed equipment-specific applications of the GRN 50x65x18 mm seal.
Suitability for a particular machine must be established from its technical requirements.
Before purchasing, verify the following:
Shaft diameter of 50 mm.
Housing bore diameter of 65 mm.
Available installation width of 18 mm.
Compatibility of the COMBI construction with the original seal.
Type of sealed medium.
NBR compatibility with the operating fluid.
Operating temperature.
Shaft rotational speed.
Pressure within the sealed assembly.
Condition of the shaft and housing surfaces.
Installation orientation and protective element requirements.
Matching dimensions of 50x65x18 mm do not guarantee full interchangeability between seals with different constructions.
Before installation, the shaft surface and seal housing bore should be thoroughly cleaned.
Inspect the shaft for scratches, corrosion and wear.
Remove sharp edges that could damage the elastomer.
Use suitable installation tools.
Press the seal evenly into the housing without tilting.
Avoid applying installation force to delicate sealing components.
Maintain the correct installation orientation.
Lubricate the mating surfaces where required by the seal design.
Protect additional sealing and protective elements from damage during installation.
Incorrect installation may result in leakage even when the selected seal has the correct nominal dimensions.
The operating performance of a rotary shaft seal depends on several interacting factors, including shaft speed, temperature, lubrication and the condition of the contact surface.
For NBR sealing elements, compatibility with the operating medium is particularly important.
Excessive friction, insufficient lubrication, shaft misalignment and contamination can contribute to premature seal wear.
Natural variations of the product designation include:
GRN COMBI 50x65x18 mm NBR
COMBI 50x65x18 GRN
GRN COMBI 50x65x18 Oil Seal
NBR COMBI Rotary Shaft Seal 50x65x18
GRN 50x65x18 Shaft Seal
Combined Rotary Shaft Seal 50x65x18
GRN COMBI NBR 50x65x18 mm
These are descriptive variations of the product name, not confirmed OEM references or catalogue cross-references from other manufacturers.
GRN COMBI 50x65x18 mm NBR is a combined rotary shaft seal with a nominal inside diameter of 50 mm, outside diameter of 65 mm and width of 18 mm.
It uses an NBR elastomer and a COMBI sealing construction intended to combine lubricant retention with additional contamination protection.
COMBI refers to a combined sealing design in which the primary shaft sealing function is supplemented by an additional protective element.
The exact internal construction depends on the specific seal version.
The nominal inside diameter is 50 mm, the outside diameter is 65 mm and the overall width is 18 mm.
NBR generally offers good resistance to many mineral oils and industrial greases.
However, compatibility must be verified for the specific fluid, operating temperature and elastomer formulation.
AO/TC is a conventional double-lip rotary shaft seal with an auxiliary dust lip.
COMBI is a combined sealing construction that may incorporate a more extensive protective arrangement.
The two designs are not automatically interchangeable.
Replacement should not be assumed without technical verification.
The dimensions, cross-sectional geometry, protective components and installation requirements must be compared.
COMBI sealing constructions may be suitable for agricultural machinery operating in dusty or contaminated environments.
However, compatibility with a particular machine requires verification of the seal dimensions, construction and operating conditions.
The COMBI designation alone does not establish a permissible operating pressure.
Any pressure rating must be confirmed from the technical documentation for the specific seal version.
GRN COMBI 50x65x18 mm NBR is a combined rotary shaft oil seal with a 50 mm inside diameter, 65 mm outside diameter and 18 mm width. Its NBR elastomer is commonly used in oil sealing applications. The COMBI construction combines shaft sealing with additional contamination protection. Exact operating limits depend on the specific seal design.
Available through the specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.
Data sheet
You might also like