Simrit 50x65x18 COMBI NBR SF8 combined rotary shaft oil seal. Inside diameter 50 mm, outside diameter 65 mm, width 18 mm. The COMBI SF8 profile combines shaft sealing with additional protection against external contamination. NBR elastomer is suitable for appropriately selected oil and grease sealing applications. Freudenberg catalogue reference 12018616. Available through the specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Brand |
Simrit |
|
Manufacturer associated with the brand |
Freudenberg Sealing Technologies |
|
Product designation |
50x65x18 COMBI NBR SF8 |
|
Product type |
Rotary shaft oil seal |
|
Seal design |
COMBI |
|
Profile designation |
SF8 |
|
Elastomer material |
NBR - nitrile butadiene rubber |
|
Inside diameter d |
50 mm |
|
Outside diameter D |
65 mm |
|
Width B |
18 mm |
|
Dimensions d x D x B |
50x65x18 mm |
|
Type of movement |
Rotary |
|
Primary function |
Lubricant retention and protection against contamination |
|
Catalogue reference |
12018616 |
The specifications identify the product according to its stated designation. The exact SF8 profile geometry, number of sealing lips, spring arrangement and permissible operating conditions should be confirmed against the manufacturer's documentation for the specific version.
Simrit is a brand associated with Freudenberg sealing technology.
The brand covers technical sealing solutions designed for various industrial applications, including rotary shaft seals and specialised sealing systems for mechanical assemblies.
The dimensions describe the principal installation measurements of the seal:
50 mm - nominal shaft diameter.
65 mm - nominal housing bore diameter.
18 mm - nominal axial width of the sealing ring.
All three dimensions are essential when identifying a replacement seal.
The COMBI designation refers to a sealing solution combining the primary radial shaft sealing function with additional protection of the contact area between the shaft and the sealing element.
Compared with a conventional rotary shaft oil seal, this construction may provide a more extensive protective arrangement against external contamination.
The exact design depends on the specific profile and manufacturer execution.
NBR is an elastomer widely used in rotary shaft seals operating with mineral oils and lubricating greases.
Its typical characteristics include:
Good resistance to many mineral-based lubricants.
Suitable mechanical properties for dynamic sealing applications.
Resistance to wear under appropriately controlled operating conditions.
Compatibility with a wide range of industrial oil sealing applications.
However, NBR is not universally resistant to all chemicals, solvents or elevated temperatures.
Material suitability depends on the elastomer compound, operating medium and service conditions.
SF8 identifies a specific sealing profile within the Freudenberg Simrit product range.
This designation is important when selecting a replacement seal.
It should not be omitted or treated as interchangeable with every COMBI seal having dimensions of 50x65x18 mm.
The exact construction features of the SF8 profile should be verified using the manufacturer's technical documentation.
The sealing ring limits lubricant leakage where a rotating shaft passes through a stationary housing.
The elastomeric sealing element operates against the shaft surface, creating a contact zone responsible for retaining oil or grease within the mechanical assembly.
Sealing performance depends on the condition of the shaft surface, correct installation and operating conditions.
An important feature of combined COMBI sealing constructions is their additional protection against contaminants entering the sealing area.
Depending on the specific design, this protective arrangement may help limit the ingress of:
Dust and airborne particles.
Mud and operating debris.
Fine solid contaminants.
Water splashes.
Contamination around rotating mechanical components.
The actual protection level depends on the sealing profile, installation and operating environment.
Additional contamination protection does not automatically mean that the seal is suitable for continuous immersion or pressurised operation.
The Simrit COMBI SF8 seal with dimensions of 50x65x18 mm is designed for a nominal shaft diameter of 50 mm.
Its operating life and sealing performance are influenced by:
Shaft surface roughness and condition.
Shaft and housing alignment.
Radial shaft runout.
Operating temperature.
Rotational speed.
Lubricant type.
Environmental contamination.
An unsuitable shaft surface or excessive runout can accelerate sealing element wear and lead to leakage.
|
Seal type |
Construction |
Main characteristics |
|---|---|---|
|
COMBI SF8 |
Combined sealing design |
Specific profile with additional contamination protection |
|
COMBI F6 |
Different combined sealing profile |
Requires comparison of cross-section and dimensions |
|
AO/TC |
Double-lip rotary shaft seal |
Primary sealing lip and auxiliary dust lip |
|
A/SC |
Single-lip rotary shaft seal |
Primary sealing lip without a standard auxiliary dust lip |
|
KASSETTE |
Cassette-type seal |
Integrated sealing system with a distinct construction |
Differences in construction affect installation requirements and operating characteristics.
Seals should not be considered fully interchangeable solely because their nominal dimensions match.
In Freudenberg Simrit catalogue documentation, the COMBI SF8 50x65x18 mm seal is associated with catalogue number 12018616 and material designation 72 NBR 902.
The Freudenberg product database also associates this catalogue reference with the COMBI F8 designation and material specification 75 NBR 106200.
Catalogue number 12018616 is therefore an important reference when identifying this sealing product.
Before confirming complete interchangeability, the material specification, construction and exact product version should be compared.
Combined rotary shaft seals are used in mechanical assemblies where rotating shafts require both lubricant retention and protection against external contamination.
Typical application areas include:
Mechanical gearboxes.
Power transmission assemblies.
Rotating shafts in industrial machinery.
Agricultural equipment.
Construction machinery.
Mechanical systems operating in dusty environments.
Bearing arrangements requiring additional contamination protection.
These are typical applications of COMBI sealing constructions, not confirmed equipment-specific applications of this exact Simrit seal.
Compatibility with a particular machine must be verified against its technical requirements.
Before purchasing or replacing the seal, verify the following:
Nominal shaft diameter of 50 mm.
Housing bore diameter of 65 mm.
Available installation width of 18 mm.
SF8 sealing profile.
NBR material and exact elastomer compound.
Original manufacturer catalogue reference.
Type of sealed oil or grease.
Operating temperature and rotational speed.
Environmental contamination conditions.
Shaft surface and housing condition.
Important: Identical dimensions of 50x65x18 mm do not automatically guarantee interchangeability between COMBI SF8, COMBI F6 and conventional rotary shaft oil seals.
Differences in sealing geometry, protective components and material specifications may affect performance and installation.
Before installation, inspect the shaft surface and thoroughly clean the seal housing.
Remove burrs and sharp edges.
Protect the sealing lips against mechanical damage.
Use a suitable installation sleeve or mounting tool.
Press the seal evenly into the housing without tilting.
Maintain the correct sealing orientation.
Follow the manufacturer's shaft surface requirements.
Lubricate the sealing contact area according to the technical documentation.
Avoid damaging any protective elements during assembly.
Incorrect installation may cause leakage even when the seal dimensions are correct.
Excessive shaft runout, unsuitable surface roughness and installation errors can contribute to premature wear.
Correct lubricant compatibility and operating conditions are essential for maintaining the service life of the sealing system.
Natural designation variations include:
Simrit 50x65x18 COMBI NBR SF8
Simrit COMBI SF8 50x65x18
SIMRIT 50X65X18 COMBI
Freudenberg COMBI SF8 50x65x18
Simmerring COMBI SF8 50x65x18
COMBI SF8 50x65x18 Rotary Shaft Seal
Freudenberg 12018616
Catalogue number 12018616 is associated with this dimension and profile in Freudenberg documentation.
Additional OEM references or cross-manufacturer equivalents require separate verification.
Simrit 50x65x18 COMBI NBR SF8 is a combined rotary shaft oil seal with nominal dimensions of 50x65x18 mm.
It uses an NBR elastomer and the COMBI SF8 profile, designed to combine shaft sealing with additional contamination protection.
The nominal inside diameter is 50 mm, the outside diameter is 65 mm and the width is 18 mm.
SF8 is a specific sealing profile designation used in the Freudenberg Simrit product range.
It is important when identifying a replacement because different COMBI sealing profiles may have different constructions.
Freudenberg Simrit documentation associates the COMBI SF8 profile in dimensions of 50x65x18 mm with catalogue number 12018616.
NBR generally offers good resistance to many mineral oils and lubricating greases.
The exact compatibility depends on the elastomer compound, operating fluid and temperature.
Interchangeability should not be assumed.
The sealing cross-section, protective arrangement, dimensions and installation requirements must be compared before selecting a replacement.
COMBI sealing constructions may be suitable for machinery operating in dusty or contaminated environments.
Compatibility with a particular agricultural machine requires verification of the seal dimensions, construction and operating conditions.
Freudenberg product information associates catalogue number 12018616 with both COMBI SF8 and COMBI F8 designations.
However, this does not mean that all products identified as F8 and SF8 are automatically interchangeable without checking the exact catalogue number, material and construction.
Simrit 50x65x18 COMBI NBR SF8 is a combined rotary shaft oil seal associated with Freudenberg sealing technology. It has a 50 mm inside diameter, 65 mm outside diameter and 18 mm width. The COMBI SF8 profile combines shaft sealing with additional contamination protection. Manufacturer documentation associates this seal with catalogue reference 12018616.
Available through the specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.
Data sheet
You might also like