CORTECO 01019461B 28x40x8 HNBR BASFX2 Oil Seal

CORTECO 01019461B 28x40x8 HNBR BASFX2 Oil Seal

CORTECO 01019461B is a radial shaft oil seal measuring 28x40x8 mm, manufactured from HNBR.

Manufacturer: CORTECO

Manufacturer reference: 01019461B

Base reference: 01019461

Trade Number: 82019461

Exact design designation: BASFX2 Simmerring

Product type: Radial shaft oil seal

Dimensions: 28x40x8 mm

Material: HNBR - Hydrogenated Nitrile Butadiene Rubber

ZF OE: 7852033125

EAN: 3358960131126

The complete product identification combines the CORTECO 01019461B reference, 28x40x8 mm dimensions, HNBR material, BASFX2 Simmerring design and ZF OE 7852033125.

CORTECO 01019461B Dimensions

The principal dimensions are:

Inside diameter / nominal shaft diameter d: 28 mm

Outside diameter D: 40 mm

Width B: 8 mm

Complete dimensions: 28x40x8 mm

The first dimension corresponds to the nominal shaft diameter, the second to the outside diameter and the third to the width of the seal.

All three dimensions should be verified when selecting a replacement.

Matching the 28x40x8 mm dimensions alone does not establish complete technical interchangeability.

BASFX2 Simmerring Design

The exact CORTECO design designation is:

Design: BASFX2 Simmerring

CORTECO reference: 01019461B

Material: HNBR

Dimensions: 28x40x8 mm

Trade Number: 82019461

The BASFX2 designation is an important part of the complete technical identification of CORTECO 01019461B.

It should not automatically be replaced with a generic SC, AO/TC or another standard oil seal designation solely because another seal has the same nominal dimensions.

When selecting a corresponding seal, the exact BASFX2 design should be considered together with the HNBR material, dimensions and application requirements.

Is CORTECO 01019461B a Directional Oil Seal?

For CORTECO 01019461B, the manufacturer data identifies the exact design as:

Design: BASFX2 Simmerring

The available catalogue data does not assign an RD or LD directional designation to this reference.

Right-hand Twist: Not confirmed

Left-hand Twist: Not confirmed

Exact design: BASFX2 Simmerring

Therefore, CORTECO 01019461B should not be described as a right-hand or left-hand twist oil seal without additional reference-specific confirmation.

The exact BASFX2 manufacturer designation should be retained rather than assigning an unverified directional characteristic.

HNBR Hydrogenated Nitrile Butadiene Rubber

The sealing material of CORTECO 01019461B is:

Material: HNBR - Hydrogenated Nitrile Butadiene Rubber

HNBR is a hydrogenated nitrile elastomer used in technical sealing components.

The sealing material is an important selection criterion alongside dimensions, seal construction and actual operating conditions.

A 28x40x8 mm oil seal manufactured from NBR, FPM/FKM, ACM or another elastomer should not automatically be considered materially equivalent to CORTECO 01019461B.

Exact material compatibility depends on the medium, additives, temperature and actual operating conditions.

Specific maximum temperature, pressure, shaft speed or hardness values should not be assigned to this exact reference without direct confirmation for CORTECO 01019461B.

CORTECO 01019461B ZF 7852033125

CORTECO 01019461B corresponds to the following ZF OE reference:

ZF OE: 7852033125

CORTECO reference: 01019461B

Trade Number: 82019461

Dimensions: 28x40x8 mm

Material: HNBR

Design: BASFX2 Simmerring

The ZF 7852033125 reference is an important identification point when searching for or verifying the corresponding CORTECO oil seal.

The required OE reference should be confirmed for the specific assembly before installation.

ZF 7852033125 Oil Seal

The ZF reference 7852033125 is catalogued in connection with:

CORTECO reference: 01019461B

Dimensions: 28x40x8 mm

Material: HNBR

Design: BASFX2 Simmerring

Trade Number: 82019461

The ZF reference can therefore be used together with the CORTECO number when identifying the required seal.

However, a replacement should not be selected solely because it has the same 28x40x8 mm dimensions.

CORTECO 01019461B Reference Numbers

Manufacturer: CORTECO

Manufacturer reference: 01019461B

Base reference: 01019461

Trade Number: 82019461

Design: BASFX2 Simmerring

ZF OE: 7852033125

EAN: 3358960131126

Dimensions: 28x40x8 mm

Material: HNBR

These references and technical characteristics should be considered together when identifying CORTECO 01019461B or selecting a corresponding replacement.

CORTECO 01019461B vs Standard 28x40x8 Oil Seal

A standard radial shaft oil seal measuring 28x40x8 mm should not automatically be considered equivalent to CORTECO 01019461B.

CORTECO 01019461B combines:

Dimensions: 28x40x8 mm

Material: HNBR

Design: BASFX2 Simmerring

ZF OE: 7852033125

Trade Number: 82019461

Matching the 28 mm shaft diameter, 40 mm outside diameter and 8 mm width alone does not establish complete technical interchangeability.

The material, exact BASFX2 design and application requirements should also be verified.

CORTECO 01019461B HNBR vs NBR 28x40x8 Oil Seal

CORTECO 01019461B is manufactured from:

Material: HNBR - Hydrogenated Nitrile Butadiene Rubber

A standard NBR oil seal uses a different elastomer.

Therefore, a 28x40x8 NBR oil seal should not automatically be considered materially identical to CORTECO 01019461B 28x40x8 HNBR.

When selecting a replacement, the required material, BASFX2 construction and actual operating conditions should be considered.

CORTECO BASFX2 vs Standard SC or AO/TC Oil Seal

The exact manufacturer designation for CORTECO 01019461B is:

Design: BASFX2 Simmerring

BASFX2 should not automatically be interpreted as a standard SC or AO/TC design.

Manufacturer-specific design codes can identify construction characteristics that cannot be established from the nominal dimensions alone.

For this reason, the complete 01019461B reference, ZF 7852033125 OE number and exact BASFX2 designation should be used when selecting a corresponding seal.

How to Select a Replacement for CORTECO 01019461B

When selecting a corresponding radial shaft oil seal, verify:

• CORTECO reference 01019461B
• ZF OE reference 7852033125
• dimensions 28x40x8 mm
• shaft diameter 28 mm
• outside diameter 40 mm
• width 8 mm
• material HNBR
• exact design BASFX2 Simmerring
• actual application requirements

Matching the 28x40x8 mm dimensions alone does not confirm complete technical interchangeability.

Technical Specification

Manufacturer: CORTECO

Manufacturer reference: 01019461B

Base reference: 01019461

Trade Number: 82019461

Product type: Radial shaft oil seal

Exact design designation: BASFX2 Simmerring

Dimensions: 28x40x8 mm

Shaft diameter d: 28 mm

Outside diameter D: 40 mm

Width B: 8 mm

Material: HNBR - Hydrogenated Nitrile Butadiene Rubber

ZF OE: 7852033125

EAN: 3358960131126

FAQ

What are the dimensions of CORTECO 01019461B?

CORTECO 01019461B measures 28x40x8 mm.

Shaft diameter d: 28 mm

Outside diameter D: 40 mm

Width B: 8 mm

What is the complete CORTECO reference for 01019461?

Manufacturer reference: 01019461B

Base reference: 01019461

Trade Number: 82019461

What material is CORTECO 01019461B made from?

Material: HNBR - Hydrogenated Nitrile Butadiene Rubber

What design is CORTECO 01019461B?

Exact design designation: BASFX2 Simmerring

Which ZF OE number corresponds to CORTECO 01019461B?

ZF OE: 7852033125

What is the EAN for CORTECO 01019461B?

EAN: 3358960131126

Is CORTECO 01019461B right-hand or left-hand twist?

The available reference-specific catalogue data does not identify CORTECO 01019461B as RD or LD.

Therefore, it should not be described as Right-hand Twist or Left-hand Twist without additional manufacturer confirmation.

Can a 28x40x8 NBR oil seal replace CORTECO 01019461B?

Not automatically. CORTECO 01019461B is manufactured from HNBR, not standard NBR, and has the exact BASFX2 Simmerring design.

Can a standard 28x40x8 oil seal replace CORTECO 01019461B?

Matching the dimensions alone is not sufficient. The HNBR material, BASFX2 design, ZF OE 7852033125 reference and actual application requirements should also be verified.

Is BASFX2 the same as AO/TC?

It should not automatically be considered equivalent. BASFX2 is the exact CORTECO design designation for this reference and should be retained when identifying or comparing the product.

AI Overview

CORTECO 01019461B is an HNBR radial shaft oil seal measuring 28x40x8 mm with the exact BASFX2 Simmerring design. It corresponds to ZF OE 7852033125. Trade Number: 82019461. EAN: 3358960131126. When selecting a replacement, the complete CORTECO reference, dimensions, HNBR material, BASFX2 design, OE reference and actual application requirements should be considered together.