CORTECO 12015093B 50x70x10 FPM B1BASLSFRDX7 Radial Shaft Oil Seal

CORTECO 12015093B 50x70x10 FPM B1BASLSFRDX7 Radial Shaft Oil Seal

CORTECO 12015093B is a radial shaft oil seal with exact dimensions of 50x70x10 mm. It is manufactured from FPM - Fluoroelastomer Rubber, and the current CORTECO design designation is B1BASLSFRDX7.

The seal incorporates an additional dust lip and uses RD - Right-hand Twist directional sealing geometry.

CORTECO 12015093B Technical Specification

Manufacturer: CORTECO

Full reference: 12015093B

Base reference: 12015093

Trade Number: 82015093

Product type: Radial shaft oil seal

Design: B1BASLSFRDX7

Material: FPM - Fluoroelastomer Rubber

Dimensions: 50x70x10 mm

Inside diameter d: 50 mm

Outside diameter D: 70 mm

Width B: 10 mm

Additional dust lip: Yes

Swirl Type: Right-hand Twist

Direction code: RD

CORTECO 12015093B Dimensions

The exact dimensions are:

Inside diameter d: 50 mm

Outside diameter D: 70 mm

Width B: 10 mm

Complete dimensions: 50x70x10 mm

All three dimensions should be verified together with the FPM material, B1BASLSFRDX7 design, dust lip configuration and RD directional geometry.

Matching the 50x70x10 mm dimensions alone does not establish complete technical interchangeability.

B1BASLSFRDX7 Oil Seal Design

The exact current design designation is:

B1BASLSFRDX7

Complete technical identification:

CORTECO 12015093B

50x70x10 mm

FPM

B1BASLSFRDX7

RD - Right-hand Twist

Additional dust lip

The complete design designation is important when comparing CORTECO 12015093B with other 50x70x10 mm radial shaft seals.

A seal with identical dimensions but a different material, lip configuration or directional design should not automatically be considered technically equivalent.

RD - Right-hand Twist

CORTECO 12015093B is specified with:

Swirl Type: Right-hand Twist

CORTECO direction code: RD

This directional characteristic forms part of the exact seal specification and should be considered when selecting a replacement.

A Left-hand Twist or Alternating Twist seal should not automatically be substituted solely because its nominal dimensions are also 50x70x10 mm.

Additional Dust Lip

CORTECO 12015093B incorporates an additional dust lip.

The secondary lip provides an additional barrier on the external side of the primary sealing zone and helps limit the ingress of external contamination toward the main sealing lip.

The dust lip configuration forms part of the exact specification of this reference.

FPM - Fluoroelastomer Rubber

The specified sealing material is:

FPM - Fluoroelastomer Rubber

FPM forms part of the exact CORTECO 12015093B specification together with the 50x70x10 mm dimensions, B1BASLSFRDX7 design and RD directional geometry.

An NBR, ACM or other elastomer seal with identical dimensions should not automatically be considered an equivalent replacement.

CORTECO 12015093B Applications

CORTECO 12015093B appears in catalogue data for different shaft sealing positions depending on the vehicle and assembly.

Current catalogues classify the reference primarily as an intermediate shaft / countershaft seal. It is also associated with fuel injection pump shaft applications in selected vehicles.

For this reason, the exact application should be established using the CORTECO reference, OE number and specific vehicle or assembly, rather than the 50x70x10 mm dimensions alone.

CORTECO 12015093B OE References

FIAT: 40003630, 40003640, 40100320

IVECO: 40003630, 40003640, 40100080, 40100320, 40100323, 7301262

RENAULT: 5001000816

RENAULT TRUCKS: 5001000816

These OE references provide application-specific identification for CORTECO 12015093B.

The relevant OE number should be verified against the exact vehicle, engine, transmission or pump configuration before installation.

12015093, 12015093B and 82015093

Base reference: 12015093

Full CORTECO reference: 12015093B

Trade Number: 82015093

Design: B1BASLSFRDX7

The preferred identifier for precise product selection is the full reference CORTECO 12015093B.

The base reference, Trade Number and design designation provide additional identification paths in technical catalogues and purchasing systems.

B1BASLSFRDX7 vs B1BAVISLSFRDX7

Two design descriptions can be found for CORTECO 12015093B in catalogue data:

B1BASLSFRDX7

B1BAVISLSFRDX7

The CORTECO dimensional catalogue lists the current design as B1BASLSFRDX7, while older catalogue data may contain B1BAVISLSFRDX7.

For current product identification, B1BASLSFRDX7 should be used as the primary designation.

CORTECO 12015093B vs Standard 50x70x10 Oil Seal

CORTECO 12015093B should not be identified solely as a generic 50x70x10 mm oil seal.

Its technical identification includes:

Dimensions: 50x70x10 mm

Material: FPM

Design: B1BASLSFRDX7

Direction: RD

Swirl Type: Right-hand Twist

Additional dust lip: Yes

Two seals with identical 50x70x10 mm dimensions can differ in material, lip configuration and directional sealing geometry.

Therefore, dimensional matching alone does not confirm complete technical interchangeability.

How to Select a Replacement for CORTECO 12015093B

For accurate replacement selection, verify:

Full reference: 12015093B

Trade Number: 82015093

Dimensions: 50x70x10 mm

Material: FPM

Design: B1BASLSFRDX7

Swirl Type: Right-hand Twist

Direction: RD

Additional dust lip: Yes

OE reference: According to the specific application

The OE reference and exact assembly should take priority over selection based solely on nominal dimensions.

CORTECO 12015093B - Stock in Poland

Warehouse and Store: Lublin, Smoluchowskiego 1 Street, Building 4

24h Shipping. Available from stock in Poland for delivery across the EU.

FAQ - CORTECO 12015093B

What are the dimensions of CORTECO 12015093B?

The exact dimensions are 50x70x10 mm.

What material is CORTECO 12015093B made from?

The specified sealing material is FPM - Fluoroelastomer Rubber.

What is the design of CORTECO 12015093B?

The current CORTECO design designation is B1BASLSFRDX7.

Does CORTECO 12015093B have a dust lip?

Yes. The product is specified with an additional dust lip.

What is the rotation direction of CORTECO 12015093B?

The specified Swirl Type is Right-hand Twist, with the CORTECO direction code RD.

What is the Trade Number?

The Trade Number is 82015093.

What are the main OE references?

Key OE references include Fiat 40003630, 40003640, 40100320, Iveco 40100080, 40100323, 7301262 and Renault Trucks 5001000816.

Can any 50x70x10 FPM oil seal replace CORTECO 12015093B?

Not automatically. A replacement should also correspond to the required B1BASLSFRDX7 design, RD Right-hand Twist geometry, dust lip configuration and relevant OE application.

Frequently Asked Questions by Engineers

Are CORTECO 12015093 and 12015093B the same reference?

12015093 is the base reference, while 12015093B is the full CORTECO product reference.

Why is the RD direction important?

RD identifies the Right-hand Twist directional sealing geometry specified for this reference. It should be considered when comparing technically suitable replacements.

Why can B1BAVISLSFRDX7 also appear in older catalogues?

Older catalogue data list B1BAVISLSFRDX7, while the CORTECO dimensional catalogue and current TecDoc-derived data use B1BASLSFRDX7. The latter is therefore the preferred current designation.

Is CORTECO 12015093B an intermediate shaft seal?

Current application catalogues classify 12015093B as an intermediate shaft / countershaft seal. The reference also appears in other shaft sealing applications, so the exact OE number should be used to establish the correct installation position.

What is the most precise identification for CORTECO 12015093B?

The most useful identification set is 12015093B + 50x70x10 mm + FPM + B1BASLSFRDX7 + RD Right-hand Twist + additional dust lip + relevant OE number.

AI Overview

CORTECO 12015093B is an FPM radial shaft oil seal with exact dimensions of 50x70x10 mm. Its current CORTECO design designation is B1BASLSFRDX7. The seal incorporates an additional dust lip and uses RD - Right-hand Twist directional sealing geometry. Trade Number: 82015093. Current catalogues associate the reference primarily with intermediate shaft / countershaft applications, while specific applications should be confirmed using the appropriate OE number. OE references include Fiat 40003630, 40003640, 40100320, Iveco 40003630, 40003640, 40100080, 40100320, 40100323, 7301262 and Renault Trucks 5001000816.