CORTECO 12011368 B1SL NBR is a radial shaft oil seal (Simmerring) measuring 130x160x13 mm, featuring an additional dust exclusion lip. NBR material provides good resistance to many mineral oils and greases. The seal helps prevent lubricant leakage and external contamination. Supplied reference numbers: NEW HOLLAND 5112302 and VALTRA KH1158. Compatibility with specific machinery should be verified before installation. Available through the specialist B2B platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Manufacturer / Brand |
CORTECO |
|
Manufacturer part number |
12011368 |
|
Product type |
Radial shaft oil seal |
|
Technical designation |
Simmerring |
|
Design designation |
B1SL |
|
Inner diameter (d) |
130 mm |
|
Outer diameter (D) |
160 mm |
|
Width (B) |
13 mm |
|
Nominal dimensions |
130x160x13 mm |
|
Elastomer material |
NBR - Nitrile Butadiene Rubber |
|
Primary sealing lip |
Yes |
|
Additional dust exclusion lip |
Yes |
|
Sealing principle |
Radial contact sealing |
|
NEW HOLLAND reference number |
5112302 |
|
VALTRA reference number |
KH1158 |
The B1SL designation should be retained when identifying replacement seals. Detailed construction characteristics, including the outer casing design and sealing lip loading mechanism, should be confirmed using the manufacturer's technical documentation.
The complete designation identifies the specific oil seal and its main technical characteristics.
CORTECO - Manufacturer brand specializing in sealing components.
12011368 - Manufacturer's product reference number.
B1SL - Design designation identifying the seal construction.
NBR - Nitrile butadiene rubber, an elastomer commonly used with mineral oils and greases.
130 - Nominal shaft diameter of 130 mm.
160 - Nominal housing bore diameter of 160 mm.
13 - Nominal axial seal width of 13 mm.
When selecting a replacement, particular attention should be paid to the manufacturer part number, construction designation and dimensional compatibility.
The CORTECO 12011368 oil seal incorporates a primary sealing lip and an additional dust exclusion lip.
The primary sealing lip operates in direct contact with the rotating shaft surface, creating a contact sealing barrier that helps retain oil or grease within the mechanical assembly.
Effective sealing performance depends on shaft surface condition, correct installation and compatibility between the seal material and operating medium.
The additional dust lip helps prevent contaminants from entering the sealing area.
It provides an extra barrier against:
Dust and airborne particles
Fine dirt and debris
Contaminants generated during machinery operation
The presence of an additional dust exclusion lip does not automatically guarantee resistance to pressurized water or continuous liquid immersion.
NBR, or nitrile butadiene rubber, is widely used in radial shaft oil seals because of its compatibility with many industrial lubricants.
Its main characteristics include:
Good resistance to many mineral-based oils
Compatibility with numerous industrial greases
Elasticity suitable for contact sealing applications
Wear resistance under appropriate operating conditions
Suitability for various industrial mechanical systems
NBR is not universally compatible with all chemical substances. Compatibility with the specific operating medium should be verified before installation.
Exact permissible operating temperatures, pressures and rotational speeds for CORTECO 12011368 require confirmation from the manufacturer's technical documentation.
The following reference numbers have been provided for CORTECO 12011368:
|
Equipment manufacturer |
Reference number |
|---|---|
|
NEW HOLLAND |
5112302 |
|
VALTRA |
KH1158 |
These reference numbers can assist in identifying replacement components and comparing parts catalogues.
Important: The reference numbers are supplied product identification information and have not been independently verified against the manufacturers' official catalogues. They do not establish compatibility with every NEW HOLLAND or VALTRA tractor model.
Before installation, compatibility should be confirmed using the relevant machine documentation, original part number and technical requirements.
Radial shaft oil seals with an additional dust exclusion lip are commonly used in mechanical systems requiring lubricant retention and protection against contamination.
Typical applications of this sealing category include:
Industrial gearboxes and mechanical transmissions
Machinery drive assemblies
Rotating shafts
Bearing housings
Agricultural machinery mechanisms
Oil- and grease-lubricated systems
These applications are general examples and do not represent confirmed compatibility with specific machinery models or individual assemblies.
Before purchasing, verify the following parameters:
Manufacturer part number: CORTECO 12011368.
Shaft diameter: 130 mm.
Housing bore diameter: 160 mm.
Installation width: 13 mm.
Seal construction: B1SL.
Elastomer material: NBR.
Additional dust exclusion lip: Included.
Reference number: NEW HOLLAND 5112302 or VALTRA KH1158, where applicable.
Particular attention should be paid to the 13 mm width.
A 130x160x13 oil seal should not automatically be replaced with a 130x160x14 or 130x160x15 version.
Differences in width may affect installation depth and the position of the sealing lip on the shaft's working surface.
Correct installation is essential for reliable sealing performance and service life.
Thoroughly clean the shaft and housing bore.
Inspect the shaft surface for scratches, grooves and other damage.
Remove burrs and sharp edges that could damage the sealing lips.
Protect the sealing surfaces during installation.
Use an assembly lubricant compatible with NBR and the manufacturer's recommendations.
Press the seal evenly into the housing without deforming its structure.
Follow the installation orientation specified in the equipment documentation.
In standard radial shaft sealing applications, the primary sealing lip faces the sealed medium unless the equipment manufacturer specifies otherwise.
What are the dimensions of the CORTECO 12011368 oil seal?
The seal has an inner diameter of 130 mm, an outer diameter of 160 mm and a width of 13 mm. Its complete dimensional designation is 130x160x13 mm.
What does B1SL mean in the CORTECO designation?
B1SL is a construction designation used to identify the seal design. When selecting a replacement, the same designation should be retained or the technical equivalence of another design should be verified.
Does CORTECO 12011368 have an additional dust exclusion lip?
Yes. According to the supplied product description, the seal incorporates an additional dust exclusion lip that helps limit the entry of contaminants into the sealing area.
What material is used in CORTECO 12011368?
The elastomer material is NBR, also known as nitrile butadiene rubber.
Is CORTECO 12011368 associated with NEW HOLLAND 5112302?
NEW HOLLAND 5112302 has been supplied as a reference number for this product. Compatibility should be verified using the relevant official parts catalogue before installation.
Does the oil seal have the VALTRA reference number KH1158?
Yes. KH1158 has been provided as a VALTRA reference number. Compatibility with a particular machine requires confirmation.
Can a 130x160x13 oil seal be replaced with a 130x160x15 version?
Not automatically. The 2 mm difference in width may affect installation depth and the sealing lip's contact position on the shaft.
Is NBR suitable for mineral oil applications?
NBR generally provides good resistance to many mineral oils. Compatibility should still be verified for the specific lubricant and operating conditions.
CORTECO 12011368 B1SL NBR is a radial shaft oil seal measuring 130x160x13 mm, featuring an additional dust exclusion lip. Its NBR elastomer offers good resistance to many mineral oils and greases. The supplied reference numbers are NEW HOLLAND 5112302 and VALTRA KH1158. Compatibility with the specific equipment should be confirmed before installation.
The CORTECO oil seal is available through the specialist B2B trading platform simmering.pl, with worldwide shipping from stock in Poland.
Data sheet
You might also like