Rotary Shaft Oil Seal 130x160x13 FKM/FPM Viton AO/ TC - Double-Lip Design
search
  • Rotary Shaft Oil Seal 130x160x13 FKM/FPM Viton AO/ TC - Double-Lip Design

Rotary Shaft Oil Seal 130x160x13 FKM/FPM Viton AO/ TC - Double-Lip Design

2 pcs.
€26.37 (net)
Price for: 1pcs.

The 130x160x13 mm FKM/FPM Viton AO is a double-lip radial shaft oil seal designed for lubricant retention and additional dust protection. Its AO construction features a spring-loaded primary sealing lip and an additional dust exclusion lip. Dimensions: 130 mm inner diameter, 160 mm outer diameter and 13 mm width. FKM/FPM fluorocarbon rubber offers resistance to many oils, fuels and elevated temperatures. The seal helps reduce lubricant leakage and external contamination. Available through the specialist B2B platform simmering.pl, with worldwide shipping from stock in Poland.

Quantity

Technical Specifications

Parameter

Specification

Product type

Radial shaft oil seal

Design designation

AO (TC-type design)

Inner diameter (d)

130 mm

Outer diameter (D)

160 mm

Width (B)

13 mm

Nominal dimensions

130x160x13 mm

Elastomer material

FKM/FPM - Fluorocarbon Rubber

Material name used in product listings

Viton

Seal construction

Double-lip

Primary sealing lip

Spring-loaded

Additional lip

Dust exclusion lip

Sealing principle

Radial contact sealing

Intended function

Rotary shaft sealing

Material identification: FKM and FPM are designations for fluorocarbon elastomers. Viton™ is a trademark associated with specific fluoroelastomer products. An FKM/FPM designation alone does not confirm that the seal contains genuine Viton-branded material.

What Does 130x160x13 FKM/FPM Viton AO Mean?

The complete product designation identifies the dimensions, elastomer material and sealing configuration.

  • 130 - Nominal shaft diameter of 130 mm.

  • 160 - Nominal housing bore diameter of 160 mm.

  • 13 - Nominal axial seal width of 13 mm.

  • FKM/FPM - Fluorocarbon rubber offering enhanced thermal and chemical resistance compared with many conventional elastomers.

  • Viton - A trade name associated with fluorocarbon elastomers.

  • AO - Double-lip construction with a primary sealing lip and an additional dust exclusion lip.

  • TC - A commonly used designation for a comparable double-lip rotary shaft oil seal configuration.

When selecting a replacement, the dimensions, elastomer material, sealing construction and equipment requirements must all be considered.

Construction and Operating Principle of the AO/ TC Oil Seal

The 130x160x13 FKM/FPM AO oil seal uses a double-lip design that combines lubricant retention with additional protection against external contamination.

Primary Sealing Lip

The primary sealing lip, manufactured from fluorocarbon elastomer, operates in direct contact with the rotating shaft surface.

A garter spring helps maintain radial contact pressure between the sealing lip and the shaft, reducing oil or grease leakage from the mechanical assembly.

Effective sealing performance depends on:

  • Suitable shaft surface condition

  • Correct installation procedures

  • Compatibility between FKM/FPM and the operating medium

  • Appropriate lubrication

  • Operating temperature and rotational speed

  • Equipment operating conditions

Additional Dust Exclusion Lip

The secondary lip provides an additional barrier between the surrounding environment and the primary sealing lip.

It helps limit the entry of:

  • Dust and airborne particles

  • Fine dirt and debris

  • Contaminants present in industrial working environments

The additional dust exclusion lip does not automatically guarantee resistance to pressurized water or continuous liquid immersion.

FKM/FPM Viton - Material Properties

FKM/FPM is a family of fluorocarbon elastomers commonly used in sealing applications involving demanding thermal and chemical conditions.

Main Characteristics of FKM/FPM

  • Good resistance to many mineral and synthetic oils

  • Compatibility with numerous fuels and industrial lubricants, depending on the compound

  • Higher thermal resistance than standard NBR elastomers

  • Good resistance to ageing under suitable operating conditions

  • Suitability for demanding mechanical sealing applications

Chemical resistance depends on the specific FKM compound, operating medium and temperature.

Certain ketones, amines and other aggressive chemicals may be incompatible with particular FKM formulations.

FKM/FPM vs NBR - Material Comparison

Property

FKM/FPM

NBR

Resistance to many mineral oils

Good

Good

Elevated temperature resistance

Generally higher

Generally lower

Resistance to various fuels

Good, compound-dependent

Compound-dependent

Chemical resistance

Broad, but not universal

Medium-dependent

Typical applications

Demanding thermal and chemical environments

Conventional oil and grease sealing systems

Exact permissible temperature, pressure and rotational speed limits for this particular oil seal require confirmation from its technical documentation.

Typical Applications of the 130x160x13 FKM/FPM AO Oil Seal

Double-lip fluorocarbon rotary shaft oil seals are commonly used in mechanical systems requiring lubricant retention and suitable material resistance.

Typical applications of this sealing category include:

  • Industrial gearboxes

  • Rotating shafts in industrial machinery

  • Mechanical drive assemblies

  • Bearing housings

  • Oil-lubricated systems

  • Equipment operating at elevated temperatures

  • Mechanical assemblies requiring additional dust protection

These are general applications of this sealing category and do not represent confirmed compatibility with specific equipment models.

AO/ TC vs A/ SC - Construction Comparison

Feature

AO/ TC

A/ SC

Seal construction

Double-lip

Single-lip

Primary sealing lip

Yes

Yes

Garter spring

Yes

Yes

Additional dust exclusion lip

Yes

No

Oil and grease retention

Yes

Yes

Additional dust protection

Yes

No

The main difference: The AO/ TC construction includes an additional dust exclusion lip, while the A/ SC design does not.

Oil seals with identical dimensions may differ in construction and are not necessarily interchangeable.

How to Select the 130x160x13 FKM/FPM AO Oil Seal

Before purchasing, verify the following parameters:

  1. Shaft diameter: 130 mm.

  2. Housing bore diameter: 160 mm.

  3. Installation width: 13 mm.

  4. Seal construction: AO - double-lip.

  5. Elastomer material: FKM/FPM.

  6. Operating medium: Compatibility with the specific oil, grease or other fluid.

  7. Operating conditions: Temperature, rotational speed, pressure and environmental contamination.

Particular attention should be paid to the difference between FKM/FPM and NBR materials.

An NBR 130x160x13 oil seal should not automatically be considered an equivalent replacement for an FKM/FPM version, even when the nominal dimensions are identical.

Installation Guidelines

Correct installation is essential for reliable sealing performance and service life.

  • Thoroughly clean the shaft and housing bore.

  • Inspect the shaft surface for scratches, grooves and other damage.

  • Remove burrs and sharp edges.

  • Protect both sealing lips during installation.

  • Use an assembly lubricant compatible with FKM/FPM.

  • Press the seal evenly into the housing without deforming its structure.

  • Follow the installation orientation specified in the equipment documentation.

In standard applications, the spring-loaded primary sealing lip should face the sealed medium unless the equipment manufacturer specifies otherwise.

Frequently Asked Questions (FAQ)

What are the dimensions of the 130x160x13 FKM/FPM AO oil seal?

The seal has an inner diameter of 130 mm, an outer diameter of 160 mm and a width of 13 mm. Its complete dimensional designation is 130x160x13 mm.

What does FKM/FPM mean in an oil seal designation?

FKM and FPM are designations for fluorocarbon elastomers that offer resistance to many oils and elevated temperatures.

Are FKM/FPM and Viton the same material?

Viton™ is a trademark associated with a family of fluoroelastomers. FKM/FPM identifies the material category, so not every FKM oil seal necessarily contains genuine Viton-branded elastomer.

Is the 130x160x13 AO oil seal a double-lip design?

Yes. The AO construction features a spring-loaded primary sealing lip and an additional dust exclusion lip.

Is FKM more temperature-resistant than NBR?

Generally, yes. FKM elastomers typically provide higher thermal resistance than standard NBR compounds. Exact limits depend on the specific material formulation and seal construction.

Is FKM/FPM suitable for synthetic oils?

FKM offers good resistance to many synthetic oils, but compatibility must be verified for the specific lubricant.

Can an NBR 130x160x13 oil seal be replaced with an FKM/FPM version?

Not automatically. In addition to dimensions, the sealing construction, operating medium and equipment requirements must be checked.

Which direction should an AO double-lip oil seal face during installation?

In standard applications, the spring-loaded primary sealing lip should face the sealed oil or grease unless the equipment documentation specifies otherwise.

130x160x13 FKM/FPM AO - Key Product Information

The 130x160x13 FKM/FPM AO is a double-lip radial shaft oil seal measuring 130x160x13 mm. Its fluorocarbon elastomer provides resistance to many oils, fuels and elevated temperatures. The spring-loaded primary lip helps retain lubricants, while the additional dust exclusion lip limits external contamination. Suitability depends on the operating medium and equipment requirements.

The oil seal is available through the specialist B2B trading platform simmering.pl, with worldwide shipping from stock in Poland.

GRN
130X160X13 FPM
2 pcs.

Data sheet

Diameter in. (mm)
60
Diameter out. (mm)
100
Height (mm)
10
Mark
GRN

You might also like