CORTECO 12014136 FPM B1BASLRDX7 40x62x7

CORTECO 12014136 FPM B1BASLRDX7 40x62x7 mm - Radial Shaft Oil Seal with Dust Lip

CORTECO 12014136 FPM B1BASLRDX7 40x62x7 mm is a radial shaft oil seal designed for sealing rotating mechanical components, including compatible gearbox shafts. Manufactured from FPM/FKM fluoroelastomer, the seal has a nominal inside diameter of 40 mm, outside diameter of 62 mm and axial width of 7 mm. Its design includes an additional dust protection lip that helps prevent lubricant leakage and reduces the entry of external contaminants into the sealing area. The manufacturer part number is CORTECO 12014136, with 215290960 supplied as a cross-reference number associated with DEUTZ-FAHR, HÜRLIMANN, LAMBORGHINI and SAME agricultural machinery.

Technical Specifications - CORTECO 12014136

The dimensions listed above are nominal.

Exact dimensional tolerances, elastomer hardness, permissible operating temperatures, rotational speeds and pressure limits must be verified against the manufacturer's technical documentation.

The complete designation B1BASLRDX7 should be retained when identifying replacement parts. Without the relevant technical drawing, individual elements of this designation should not be assigned specific construction characteristics.

What Does CORTECO 12014136 FPM B1BASLRDX7 40x62x7 Mean?

The product designation contains the essential information required to identify the shaft seal:

• CORTECO - manufacturer brand associated with industrial sealing products.

• 12014136 - manufacturer part number.

• FPM - fluorocarbon rubber used as the elastomeric sealing material.

• FKM - another commonly used designation for the fluoroelastomer material family.

• B1BASLRDX7 - complete construction designation supplied for the product.

• 40 - nominal shaft diameter of 40 mm.

• 62 - nominal housing bore diameter of 62 mm.

• 7 - nominal axial width of 7 mm.

The dimensions 40x62x7 mm refer respectively to the inside diameter, outside diameter and width of the shaft seal.

What Do FPM and FKM Mean?

FPM and FKM are designations used for fluorocarbon elastomers.

In commercial sealing product descriptions, these terms are often used interchangeably. However, individual fluoroelastomer compounds may have different properties.

These differences may include:

• Resistance to specific oils and operating fluids.

• Operating temperature range.

• Chemical compatibility.

• Hardness.

• Aging resistance.

• Compression set.

• Mechanical properties.

Therefore, the FPM/FKM material designation alone does not replace the technical documentation for the specific finished product.

B1BASLRDX7 Construction - Rotary Shaft Sealing with Dust Protection

CORTECO 12014136 is a radial shaft oil seal designed to operate against the surface of a rotating shaft.

According to the supplied product description, it features a primary sealing lip and an additional dust protection lip.

Primary Sealing Lip

The primary sealing lip contacts the rotating shaft surface and creates a sealing interface designed to retain lubricant inside the mechanical assembly.

Its performance depends on:

• Shaft surface quality.

• Appropriate sealing contact pressure.

• Lubrication.

• Rotational speed.

• Operating temperature.

• Type of oil.

• Correct installation.

Additional Dust Protection Lip

The additional dust lip helps prevent external contaminants from reaching the main sealing area.

This is particularly important in equipment operating in environments containing dust, dirt and other airborne particles.

An additional dust lip may improve protection of the primary sealing edge, but it does not guarantee complete resistance to all contaminants, high-pressure water or submerged operation.

Importance of the B1BASLRDX7 Designation

The complete designation B1BASLRDX7 should be treated as an important construction identifier.

When searching for a replacement, it is necessary to verify not only the dimensions of 40x62x7 mm but also:

• Seal body construction.

• Sealing lip configuration.

• Dust lip arrangement.

• Possible directional features.

• Installation requirements.

• Housing fit.

Without verified manufacturer documentation, the RDX7 suffix should not be interpreted as indicating a specific rotation direction or other particular construction feature.

FPM/FKM Fluoroelastomer - Material Properties

Resistance to Elevated Temperatures

FPM/FKM fluoroelastomers are commonly used in sealing applications involving demanding thermal conditions.

Compared with standard NBR compounds, many FKM materials can provide more favorable performance at elevated temperatures.

This can be particularly important in mechanical assemblies where gearbox oil and surrounding components become hot during operation.

However, the exact operating temperature range of CORTECO 12014136 must be confirmed using the manufacturer's technical documentation.

Resistance to Oils and Lubricants

FPM/FKM is widely used in seals operating in contact with many mineral oils and industrial lubricants.

When selecting a gearbox shaft seal, compatibility with the specific transmission oil should be checked, including its additives and operating conditions.

Chemical Resistance

Fluoroelastomers offer favorable resistance to many chemical substances, but they are not universally compatible with all media.

Compatibility should be verified for:

• Gearbox oils.

• Lubricant additives.

• Fuels.

• Solvents.

• Cleaning agents.

• Industrial process fluids.

• Operating temperature and exposure duration.

Aging Resistance

The properties of fluoroelastomers make them suitable for many sealing applications requiring durability under demanding thermal and chemical conditions.

However, the service life of a particular shaft seal also depends on shaft condition, lubrication, mechanical loading and installation quality.

Material Limitations

Not every FKM compound is suitable for contact with every operating medium.

Compatibility with certain chemical compounds, fluids containing amines, ketones and selected water-based media may be limited.

Material selection should always be based on the characteristics of the specific compound rather than the FPM designation alone.

CORTECO 12014136 FPM vs NBR Shaft Seals

A 40x62x7 mm FPM shaft seal is not automatically interchangeable with a 40x62x7 mm NBR shaft seal.

Material, construction type, sealing lip geometry, sealed medium and operating conditions must all be considered.

CORTECO 12014136 - OEM and Cross-Reference Numbers

In the supplied reference information, part number 215290960 is associated with four agricultural machinery brands.

These references are intended to assist with replacement part identification.

Important: The cross-references are based on the supplied product information and do not constitute independently verified compatibility with every machine model from these manufacturers. Before ordering, confirm the original part number, machine model, serial number and seal construction.

DEUTZ-FAHR 215290960

Reference number 215290960 is listed for DEUTZ-FAHR.

When selecting a replacement, verify whether the specific gearbox requires CORTECO 12014136 with dimensions of 40x62x7 mm and B1BASLRDX7 construction.

HÜRLIMANN 215290960

HÜRLIMANN 215290960 appears in the product's cross-reference information.

Compatibility with a specific tractor should be verified against the manufacturer's parts catalog or the identification of the removed seal.

LAMBORGHINI 215290960

Reference number 215290960 is also listed for LAMBORGHINI agricultural machinery.

This reference should not be assumed to apply to Lamborghini sports cars without appropriate technical documentation.

SAME 215290960

SAME 215290960 is listed as a cross-reference number.

Before installation, confirm dimensional, construction and material compatibility with the original sealing component.

Gearbox Shaft Oil Seal 40x62x7 - Typical Applications

Radial shaft seals measuring 40x62x7 mm and manufactured from FPM may be used in appropriately designed mechanical assemblies.

Potential applications include:

• Gearbox input and output shafts, where specified by the assembly design.

• Mechanical transmissions.

• Power transmission assemblies.

• Rotating shaft housings.

• Agricultural machinery mechanisms.

• Gear oil retention systems.

• Mechanical components requiring additional dust protection.

These are general examples of applications for this category of shaft seals.

They do not establish confirmed compatibility between CORTECO 12014136 and every gearbox or machine produced by the listed manufacturers.

How to Select a Replacement for CORTECO 12014136

When choosing a replacement shaft seal, compare the following parameters:

1. CORTECO manufacturer part number 12014136.

2. Original reference number 215290960, where applicable.

3. Shaft diameter of 40 mm.

4. Housing bore diameter of 62 mm.

5. Axial width of 7 mm.

6. FPM/FKM elastomer material.

7. Complete construction designation B1BASLRDX7.

8. Presence of an additional dust protection lip.

9. Seal body geometry and material.

10. Type of oil and operating conditions.

11. Rotational speed and direction, if required by the seal design.

12. Condition of the shaft surface and housing bore.

Can CORTECO 12014136 Be Replaced with a Standard 40x62x7 Oil Seal?

Not automatically.

Matching nominal dimensions alone is insufficient to confirm interchangeability.

Sealing lip construction, elastomer material, installation requirements and any directional features must also be checked.

Can an FPM 40x62x7 Shaft Seal Be Replaced with NBR?

Not always.

NBR and FPM differ in their thermal, chemical and mechanical properties.

Substitution requires verification of the lubricant type, temperature and operating conditions.

Can a 40x62x8 Shaft Seal Replace a 40x62x7 Seal?

Not automatically.

A 1 mm difference in width may change the sealing lip position on the shaft and affect installation within the housing.

The housing depth and position of the sealing contact surface must be verified.

Installation of CORTECO 12014136

Correct installation directly affects gearbox shaft seal reliability and service life.

Shaft Preparation

Before installation:

• Clean the shaft surface.

• Check for scratches and wear grooves.

• Inspect for corrosion and other damage.

• Verify the nominal shaft diameter of 40 mm.

• Check the condition of the sealing contact surface.

Housing Preparation

The housing bore should be clean and free from burrs and damage.

Verify the nominal housing bore diameter of 62 mm and the required installation depth.

Installing the Shaft Seal

The seal should be pressed evenly into the housing using an appropriate installation tool that does not deform the seal body.

The primary sealing lip should face the correct direction according to the assembly design, normally toward the oil being retained.

Before operation, ensure appropriate lubrication of the sealing contact area in accordance with the manufacturer's recommendations.

If the original shaft seal incorporates directional features, the correct orientation must be maintained.

Common Installation Mistakes

• Installing the seal at an angle.

• Damaging the sealing lip on sharp shaft edges.

• Incorrect orientation of the sealing lip.

• Using a seal with the wrong axial width.

• Installing the seal on a worn shaft.

• Insufficient initial lubrication.

• Deforming the seal body during installation.

• Ignoring directional construction features.

Alternative Product Names and Commercial Designations

The product may appear under the following names:

• CORTECO 12014136

• CORTECO 12014136 FPM

• CORTECO B1BASLRDX7

• CORTECO Oil Seal 40x62x7

• CORTECO 12014136 Simmerring

• Simmerring 40x62x7 FPM

• Gearbox Shaft Oil Seal 40x62x7

• FPM Shaft Seal 40x62x7 with Dust Lip

• CORTECO Radial Shaft Seal 12014136

• DEUTZ-FAHR 215290960 Oil Seal

• HÜRLIMANN 215290960 Shaft Seal

• LAMBORGHINI 215290960 Agricultural Shaft Seal

• SAME 215290960 Oil Seal

• CORTECO 12014136 Radial Shaft Seal

• CORTECO 40x62x7 FKM Oil Seal

• CORTECO Gearbox Shaft Seal 40x62x7

• Radialwellendichtring 40x62x7 FPM

• Simmerring B1BASLRDX7 40x62x7

Frequently Asked Questions - CORTECO 12014136

1. What are the dimensions of CORTECO 12014136?

The seal has a nominal inside diameter of 40 mm, outside diameter of 62 mm and axial width of 7 mm.

2. What material is CORTECO 12014136 made from?

Its elastomeric sealing component is manufactured from FPM fluoroelastomer, also commonly designated FKM.

3. What does B1BASLRDX7 mean?

It is the complete construction designation supplied for the shaft seal. The exact meaning of its individual elements should be confirmed using CORTECO technical documentation.

4. Does CORTECO 12014136 have an additional dust lip?

Yes. According to the supplied product description, the seal features an additional lip designed to reduce the entry of external contaminants.

5. Is CORTECO 12014136 a gearbox shaft oil seal?

The product is described as a gearbox shaft seal. Compatibility with a specific gearbox must be verified using the original part number and machine documentation.

6. Does CORTECO 12014136 correspond to DEUTZ-FAHR 215290960?

Part number 215290960 is supplied as a cross-reference. Compatibility with the specific machine model must be confirmed before installation.

7. Is this shaft seal suitable for SAME tractors?

SAME 215290960 appears in the supplied reference list, but compatibility with a particular tractor model requires verification.

8. Is the seal compatible with HÜRLIMANN and LAMBORGHINI agricultural machinery?

Reference number 215290960 is also listed for these brands. This does not establish compatibility with every model.

9. Is FPM better than NBR for gearbox applications?

FPM may offer more favorable properties at elevated temperatures and with certain operating fluids. The correct choice depends on the oil, temperature, seal construction and operating conditions.

10. Can an FPM 40x62x7 shaft seal be replaced with an NBR seal?

Not automatically. Interchangeability requires verification of material properties and construction compatibility.

11. Is CORTECO 12014136 designed for rotating shafts?

Yes. It is a radial shaft seal designed to operate against the surface of a rotating shaft.

12. Which OEM reference numbers are associated with CORTECO 12014136?

The supplied cross-reference list identifies number 215290960 for DEUTZ-FAHR, HÜRLIMANN, LAMBORGHINI and SAME. Compatibility must be confirmed using the relevant parts catalog.

CORTECO 12014136 FPM B1BASLRDX7 40x62x7 - Key Product Information

CORTECO 12014136 is a radial shaft oil seal measuring 40x62x7 mm, manufactured from FPM/FKM fluoroelastomer. According to the supplied product description, its B1BASLRDX7 construction includes an additional dust protection lip. The seal is indicated for gearbox shaft applications, subject to confirmation of compatibility with the specific assembly. Cross-reference number 215290960 is listed for DEUTZ-FAHR, HÜRLIMANN, LAMBORGHINI and SAME agricultural machinery.

The CORTECO 12014136 FPM B1BASLRDX7 40x62x7 mm shaft seal is available from simmering.pl, a specialist supplier of industrial sealing products and bearings operated by TG Ersatzteile Polska Sp. z o.o. The company maintains a warehouse in Lublin, Poland, serving industrial customers, agricultural machinery repair services, maintenance departments and technical procurement teams, with shipping across Poland and other European Union countries.