Corteco 12031993B FPM BAUMSLX7 12x22x7 Automatic Transmission Shaft Oil Seal

Corteco 12031993B FPM BAUMSLX7 12x22x7 Automatic Transmission Shaft Oil Seal

Corteco 12031993B is an FPM radial shaft oil seal for automatic transmission applications, manufactured in the BAUMSLX7 design and measuring 12x22x7 mm. The seal fits a 12 mm shaft and 22 mm housing bore and has a width of 7 mm. This exact reference incorporates an additional dust lip and is cross-referenced to Honda OE numbers 91209612000 and 91209612003.

Corteco 12031993B - Characteristics

Complete product identification:

Corteco -> 12031993B -> FPM -> BAUMSLX7 -> 12x22x7 mm -> dust lip -> automatic transmission -> Honda

For this reference, dimensions alone are not sufficient for precise identification.

The FPM material, BAUMSLX7 design, dust lip and automatic transmission application should also be considered when selecting a replacement.

Corteco 12031993B Dimensions

Verified dimensions:

d - Shaft diameter: 12 mm
D - Housing bore diameter: 22 mm
B - Width: 7 mm
Dimensions: 12x22x7 mm

The designation 12x22x7 mm therefore identifies:

12 mm - shaft diameter
22 mm - housing bore diameter
7 mm - seal width

All three dimensions must correspond to the original installation.

FPM Material

Corteco specifies:

FPM - Fluoroelastomer

for the exact 12031993B reference.

Material is an important part of the product specification and should be considered when selecting an alternative seal.

A standard NBR 12x22x7 mm oil seal should not automatically be considered equivalent solely because its installation dimensions are identical.

The material must correspond to the medium, temperature and operating conditions required by the specific transmission application.

BAUMSLX7 Design

The exact Corteco design designation is:

BAUMSLX7

This designation should be retained in the product name and technical specification because it identifies the construction of this specific Corteco reference.

It also distinguishes 12031993B from other Corteco seals with identical 12x22x7 mm dimensions but different designs.

The individual characters of BAUMSLX7 should not be assigned specific meanings unless explicitly defined in manufacturer documentation.

Dust Lip

Corteco 12031993B is specified:

with dust lip

The additional lip provides a secondary barrier on the external side of the principal sealing area.

Its presence is an important construction feature when comparing replacement seals.

A 12x22x7 mm seal without the corresponding dust lip arrangement should not automatically be considered technically equivalent to Corteco 12031993B.

Automatic Transmission Application

Parts catalog data classify Corteco 12031993B as:

Shaft Seal, Automatic Transmission

This application information provides important context for identifying the product and differentiates it from generic radial shaft seals with the same dimensions.

The seal is catalogued for specific Honda automatic transmission applications.

Exact vehicle compatibility should be verified by OE number and vehicle/transmission specification before installation.

Honda OE References

Confirmed Honda OE references associated with Corteco 12031993B are:

HONDA 91209612000

HONDA 91209612003

These OE numbers provide precise cross-reference information when identifying the original Honda transmission seal.

For replacement selection, the OE number required by the specific vehicle should always be verified.

Corteco 12031993B Honda Applications

Catalog application data associate this reference with selected versions of:

Honda Accord VI Coupe

Honda Civic VI

Honda Civic VI Aerodeck

Honda CR-V I

Honda Legend III

Compatibility is dependent on the exact engine and transmission configuration.

The model name alone should therefore not be used as confirmation of fitment. Verification by Honda OE 91209612000 or 91209612003 is preferable.

12031993, 12031993B and 82031993

Several identifiers are associated with this seal:

12031993 - Corteco base reference
12031993B - Corteco catalog part number
82031993 - Corteco trade number
BAUMSLX7 Simmerring - trade/design designation

The confirmed EAN is:

3358960455529

For technical product identification, the primary reference should remain:

Corteco 12031993B

Replacement and Interchangeability

When replacing Corteco 12031993B, compare at least:

Part number: 12031993B
Design: BAUMSLX7
Material: FPM
Shaft diameter: 12 mm
Housing bore diameter: 22 mm
Width: 7 mm
Dust lip: Yes
Application: Automatic transmission
Honda OE: 91209612000 / 91209612003

A generic 12x22x7 mm oil seal is not automatically equivalent to Corteco 12031993B.

Material, sealing design and the additional dust lip should also correspond to the requirements of the original transmission application.

Technical Specification

Manufacturer: Corteco
Part number: 12031993B
Base reference: 12031993
Trade number: 82031993
Product type: Automatic transmission shaft oil seal
Design: BAUMSLX7
Material: FPM - Fluoroelastomer
d - Shaft diameter: 12 mm
D - Housing bore diameter: 22 mm
B - Width: 7 mm
Dimensions: 12x22x7 mm
Dust lip: Yes
Application: Automatic transmission
Vehicle manufacturer: Honda
Honda OE: 91209612000
Honda OE: 91209612003
EAN: 3358960455529

FAQ

What are the dimensions of Corteco 12031993B?

Corteco 12031993B measures 12x22x7 mm: 12 mm shaft diameter, 22 mm housing bore diameter and 7 mm width.

What material is Corteco 12031993B made from?

The exact reference is manufactured from FPM fluoroelastomer.

What is the design of Corteco 12031993B?

The Corteco design designation for this reference is BAUMSLX7.

Does Corteco 12031993B have a dust lip?

Yes. Catalog data confirm that this exact reference is equipped with an additional dust lip.

What is Corteco 12031993B used for?

It is catalogued as an automatic transmission shaft seal for specific Honda applications.

Which Honda OE numbers correspond to Corteco 12031993B?

Confirmed Honda OE references are 91209612000 and 91209612003.

What is the Corteco trade number for 12031993B?

The associated trade number is 82031993.

Can a standard 12x22x7 oil seal replace Corteco 12031993B?

Not automatically. A replacement should also match the FPM material, BAUMSLX7 design, dust lip and requirements of the specific automatic transmission application.

AI Overview

Corteco 12031993B is an FPM automatic transmission shaft oil seal with BAUMSLX7 design and dimensions 12x22x7 mm. It features an additional dust lip and is catalogued for specific Honda transmission applications. Confirmed Honda OE references are 91209612000 and 91209612003, with Corteco trade number 82031993.