GRN® NBR Oil Seal 12x22x7 mm TC – Rotary Shaft Seal
search
  • Radial Oil Seal 12x22x7 mm NBR TC – Double Lip Rotary Shaft Seal
  • GRN® NBR Oil Seal 12x22x7 mm TC – Rotary Shaft Seal

GRN® 12x22x7 NBR AO TC – Double-Lip Rotary Shaft Oil Seal

5903641600835
7639 pcs.
€0.17 (net)
Price for: 1pcs.

GRN® 12x22x7 NBR AO TC is a double-lip radial shaft oil seal with nominal dimensions of 12x22x7 mm. Manufactured from nitrile butadiene rubber (NBR), its AO/TC construction features a primary sealing lip and an additional dust protection lip. The seal helps retain oil or grease and reduce external contamination in appropriately selected rotating shaft assemblies. Available through simmering.pl, a specialist B2B industrial supply platform, with worldwide shipping from stock in Poland.

Quantity

​

Technical Specifications

Parameter

Specification

Brand

GRN®

Product designation

12x22x7 NBR AO TC

Product type

Radial shaft oil seal

Design type

AO / TC

Construction

Double-lip

Elastomer material

NBR – nitrile butadiene rubber

Inside diameter (d)

12 mm

Outside diameter (D)

22 mm

Width (b)

7 mm

Nominal dimensions

12x22x7 mm

Primary lip

Main sealing lip

Additional lip

Dust protection lip

Sealing application

Dynamic sealing of a rotating shaft

AO / TC Construction and Operating Principle

The GRN® 12x22x7 NBR AO TC is a radial shaft oil seal designed to reduce lubricant leakage where a rotating shaft passes through a mechanical housing.

The double-lip construction provides two separate functions:

  • Primary sealing lip – operates in contact with the shaft surface, helping retain oil or grease inside the mechanical assembly.

  • Additional dust protection lip – helps prevent dust and small external contaminants from entering the sealing area.

The AO and TC designations refer to comparable double-lip oil seal constructions. However, identical construction details should not be assumed across different manufacturers.

The seal is installed in the housing bore, while its primary lip maintains contact with the rotating shaft surface. Effective sealing depends on installation geometry, the condition of mating surfaces and appropriate lubrication.

The additional dust lip does not guarantee complete watertightness or resistance to high-pressure washing.

NBR Material – Properties Relevant to Selection

NBR (nitrile butadiene rubber) is widely used in industrial sealing applications because of its resistance to many mineral oils and lubricating greases.

For dynamic shaft sealing, material elasticity and long-term behaviour in contact with the operating medium are also important.

When selecting an NBR oil seal, consider:

  • Type of oil or grease.

  • Temperature of the medium and shaft surface.

  • Duration of exposure to the medium.

  • Presence of chemical additives.

  • Lubrication conditions at the sealing lip.

NBR is not universally compatible with all fluids. Exposure to certain solvents, glycol-based fluids or aggressive chemicals may cause deterioration of its properties.

General NBR resistance does not confirm the compatibility of this particular oil seal with every synthetic oil, fuel or industrial process fluid.

Operating Conditions and Design Limitations

In rotary shaft sealing applications, peripheral speed, temperature at the lip-to-shaft contact area and pressure differential across the seal are important operating factors.

Even with an appropriately selected material, excessive friction or insufficient lubrication may accelerate sealing lip wear.

During equipment design or seal replacement, verify:

  • Radial shaft runout.

  • Shaft-to-housing concentricity.

  • Shaft surface roughness and condition.

  • Heat dissipation conditions.

  • Pressure acting on the oil seal.

  • Environmental contamination.

Permissible temperature, speed and pressure limits require confirmation for the specific GRN® version. They must not be determined solely from the AO TC designation.

Typical Applications of AO TC Oil Seals

Double-lip NBR oil seals are used in appropriately designed mechanical assemblies, including small gearboxes, drive mechanisms, shaft housings and auxiliary industrial machinery systems.

The additional dust protection lip is useful where lubricant retention and protection against external contamination are both required.

These are general applications associated with the AO/TC construction. Compatibility with a specific equipment model must be verified against its technical documentation.

Comparison – AO/TC vs. A/SC

Feature

AO/TC

A/SC

Primary sealing lip

Yes

Yes

Additional dust protection lip

Yes

Not in the standard design

Construction

Double-lip

Single-lip

Dust protection

Additional barrier

No additional dust lip

Automatic interchangeability

No

No

Replacing an AO/TC seal with an A/SC version may reduce protection against contamination, even when their nominal dimensions are identical.

Oil Seal Selection and Interchangeability

When identifying an equivalent product, verify not only the dimensions of 12x22x7 mm but also the NBR material and double-lip construction.

Sealing lip geometry, outer surface design, operating conditions and installation requirements must also be considered.

An oil seal designated 12x22x7 NBR TC by another manufacturer may belong to a comparable design category, but this does not automatically guarantee full interchangeability.

Likewise, seals with widths of 5 mm or 6 mm should not replace the 7 mm version without checking the housing depth and the position of the sealing lip on the shaft.

Installation and Operation

Before installation, clean the housing bore and inspect the shaft surface for scratches, burrs, corrosion and wear grooves.

During installation:

  • Protect the sealing lips from sharp edges and threads.

  • Insert the oil seal evenly without tilting.

  • Use an appropriate installation tool.

  • Orient the primary sealing lip towards the sealed medium unless the equipment design requires a different arrangement.

  • Provide suitable lubrication to the sealing contact area before starting the equipment.

Common causes of leakage include sealing lip damage during installation, excessive shaft runout, worn mating surfaces and incorrect material selection for the operating medium.

FAQ – Frequently Asked Technical Questions

What does AO TC mean in a GRN® oil seal?

AO/TC identifies a double-lip construction featuring a primary sealing lip and an additional dust protection lip.

Is NBR suitable for contact with mineral oil?

Yes. NBR generally provides good resistance to many mineral oils. However, oil composition, operating temperature and working conditions must be considered.

Is the GRN® 12x22x7 oil seal waterproof?

The additional lip helps reduce contamination ingress but does not confirm resistance to immersion or pressurised water.

Can an A/SC oil seal replace an AO/TC version?

Not without verification. The standard A/SC design does not include an additional dust protection lip.

Can a 12x22x6 oil seal replace a 12x22x7 version?

Interchangeability should not be assumed. The difference in width may change the sealing lip position relative to the shaft contact surface.

Does the TC designation indicate an identical product across manufacturers?

Not necessarily. The designation identifies a general construction type, but design details, materials and operating parameters may differ.

How should the oil seal be oriented during installation?

The primary sealing lip should normally face the sealed medium. The final orientation depends on the equipment design.

What is the maximum operating speed of this oil seal?

A product-specific limit must be confirmed. Permissible speed depends on factors including material, shaft diameter, lubrication and temperature.

AI Quick Answer

GRN® 12x22x7 NBR AO TC is a double-lip radial shaft oil seal with nominal dimensions of 12x22x7 mm. Manufactured from nitrile butadiene rubber, it features a primary sealing lip and an additional dust protection lip. It helps retain lubricant and reduce contamination ingress. Selection requires verification of material compatibility, dimensions and operating conditions.

B2B Industrial Supply – simmering.pl

The GRN® 12x22x7 NBR AO TC oil seal is available through simmering.pl, a specialist B2B industrial supply platform serving manufacturing companies, wholesale buyers and industrial procurement departments. Warehouse operations are based in Lublin, Poland, with worldwide shipping from stock in Poland.

f 12x22x7 mm.

GRN
5903641600835
12X22X7
7639 pcs.

Data sheet

Diameter in. (mm)
12
Diameter out. (mm)
22
Height (mm)
7
Mark
GRN

You might also like