CORTECO 12032093 85x110x12 mm FPM BAUMSLX7 is a radial rotary shaft oil seal, also known as a Simmerring. Nominal shaft diameter 85 mm, housing bore diameter 110 mm and axial width 12 mm. FPM fluoroelastomer sealing material provides good resistance to many mineral oils and industrial greases. The BAUMSLX7 profile is an important construction characteristic and must be considered when selecting replacements. CORTECO sealing component for appropriately designed rotating shaft applications. Available at simmering.pl, stock in Poland and worldwide shipping.
The CORTECO 12032093 rotary shaft seal is designed for a nominal shaft diameter of 85 mm and a housing bore diameter of 110 mm.
Its nominal axial width is 12 mm.
The product belongs to the category of radial shaft seals, commonly referred to as oil seals, rotary shaft seals or Simmerrings.
Key features:
Manufacturer: CORTECO.
Manufacturer part number: 12032093.
Dimensions: 85x110x12 mm.
Sealing material: FPM fluoroelastomer.
Seal profile: BAUMSLX7.
Product type: radial rotary shaft oil seal.
Designed to seal rotating shafts in suitable housings.
Intended for installation in a cylindrical housing bore.
Selection requires verification of dimensions, profile and operating conditions.
| Parameter | Specification |
|---|---|
| Manufacturer | CORTECO |
| Manufacturer part number | 12032093 |
| Full designation | CORTECO 12032093 FPM BAUMSLX7 |
| Product type | Radial rotary shaft oil seal |
| Technical name | Simmerring |
| Seal profile | BAUMSLX7 |
| Elastomer material | FPM |
| Material family | Fluoroelastomer |
| Nominal shaft diameter (d) | 85 mm |
| Nominal housing bore diameter (D) | 110 mm |
| Nominal seal width (B) | 12 mm |
| Dimensions | 85x110x12 mm |
| Brand | CORTECO |
Specific operating temperature limits, pressure ratings, permissible shaft speeds, hydrodynamic pumping direction, spring material and product weight are not stated because these parameters have not been individually confirmed for part number 12032093.
CORTECO is a brand specializing in sealing technology, including radial rotary shaft seals and other industrial sealing components.
12032093 is the manufacturer's catalogue number identifying this specific CORTECO product.
The complete part number should be retained when searching, ordering or comparing replacement seals.
The dimensional designation identifies:
85 mm - nominal shaft diameter.
110 mm - nominal housing bore diameter.
12 mm - nominal axial width of the seal.
FPM identifies the fluoroelastomer sealing material.
Fluoroelastomers are used in sealing applications requiring appropriate chemical and thermal resistance.
The designation FKM is also commonly used internationally for this elastomer family.
BAUMSLX7 identifies the seal's construction profile.
The complete designation is technically significant and should not automatically be treated as equivalent to BA, BASL, BAUMX7 or other seal profiles with identical nominal dimensions.
Without a detailed manufacturer drawing for this specific part number, individual letters should not be assigned unverified characteristics such as a particular pumping direction or special lip geometry.
FPM is a sealing material used in applications requiring resistance to appropriately selected oils, lubricants and chemical substances.
Typical properties of suitable FPM compounds include:
Good resistance to many mineral oils.
Compatibility with numerous industrial greases.
Resistance to many fuels and hydrocarbons.
Potential suitability for elevated operating temperatures compared with many standard NBR compounds.
Chemical resistance useful in selected industrial environments.
However, FPM is not universally resistant to every chemical.
Performance depends on the specific elastomer compound, operating temperature, exposure duration and sealed medium.
The exact permissible temperature range for CORTECO 12032093 must be confirmed using manufacturer documentation.
CORTECO 12032093 is a radial rotary shaft seal.
This type of seal operates at the interface between the surface of a rotating shaft and a sealing element installed in a stationary housing.
During operation, the sealing lip contacts the shaft surface and forms a barrier that helps restrict the movement of lubricant or other compatible media.
Correct operation depends on:
Shaft diameter.
Housing bore dimensions.
Condition of the shaft running surface.
Shaft and housing alignment.
Correct installation.
Elastomer compatibility with the sealed medium.
Rotational speed and lubrication conditions.
The specific BAUMSLX7 seal construction.
A rotary shaft oil seal does not support the mechanical loads acting on the shaft and cannot replace a bearing.
The dimensions 85x110x12 mm may also be found in other rotary shaft seal designs.
Examples of CORTECO catalogue references with the same nominal dimensions include:
| CORTECO Part Number | Material | Profile |
|---|---|---|
| 12032093 | FPM | BAUMSLX7 |
| 12032026 | FPM | BAUMX7 |
| 12011395 | FPM | B2VIDRW |
| 12011036 | NBR | BA |
| 12011206 | NBR | BASL |
| 12016477 | ACM | BASLDRW |
Identical nominal dimensions do not guarantee interchangeability.
Different versions may use different elastomer materials, sealing lip geometries or other construction features.
These differences can affect installation requirements, shaft contact conditions and operating performance.
Before substituting another part number, compare the relevant technical documentation and equipment requirements.
Common alternative descriptions include:
CORTECO 12032093
12032093 CORTECO
CORTECO 12032093 85x110x12
12032093 FPM BAUMSLX7
CORTECO 12032093 Simmerring
Rotary shaft seal 85x110x12 FPM BAUMSLX7
CORTECO 85x110x12 oil seal
These are alternative descriptions of the same catalogue reference, not separate OEM part numbers or verified equivalents from other manufacturers.
Before ordering CORTECO 12032093, verify:
Manufacturer part number 12032093.
Nominal shaft diameter of 85 mm.
Nominal housing bore diameter of 110 mm.
Axial installation width of 12 mm.
BAUMSLX7 seal profile.
FPM elastomer material.
Type of sealed medium.
Operating temperature.
Shaft rotational speed.
Pressure conditions inside the housing.
Shaft surface condition and lubrication.
Equipment manufacturer's requirements.
If the original seal uses a special lip geometry, pumping feature or other design characteristic, replacing it with a standard profile may be unsuitable even when the dimensions are identical.
FPM rotary shaft seals are used in appropriately designed mechanical systems where lubricant retention is required around a rotating shaft.
Typical application areas for this category of seals include:
Mechanical gearboxes.
Shaft housings.
Power transmission assemblies.
Industrial machinery.
Oil-lubricated mechanisms.
Selected agricultural and construction machinery assemblies.
These are general applications of FPM radial shaft seals and do not establish confirmed fitment of CORTECO 12032093 to any particular machine or vehicle model.
Before installation, inspect the shaft and housing bore.
Recommended precautions:
Clean the shaft surface and housing bore.
Check for wear grooves, burrs and other surface damage.
Protect the sealing lip from cutting during installation.
Use an appropriate installation tool that applies uniform pressure to the intended mounting surface.
Never apply installation force directly to the sealing lip.
Ensure correct axial positioning.
Follow the applicable lubrication requirements for the sealing lip.
Verify that the seal is properly seated in the housing.
Installation orientation should be determined from the seal design and equipment documentation.
Avoid operating conditions that could cause unacceptable dry running of the sealing lip.
The seal has a nominal inside diameter of 85 mm, outside diameter of 110 mm and axial width of 12 mm.
The specified elastomer material is FPM, a fluoroelastomer used in industrial sealing applications.
BAUMSLX7 is the seal's construction profile designation. The complete code is important when selecting a replacement and should not be substituted without technical verification.
Interchangeability cannot be assumed. Both references have nominal dimensions of 85x110x12 mm and use FPM, but their profile designations differ: BAUMSLX7 and BAUMX7.
Suitable FPM compounds generally offer good resistance to many mineral oils and industrial lubricants. Compatibility with the specific medium and temperature must still be verified.
Not automatically. NBR and FPM have different material characteristics, and identical dimensions do not establish equivalent construction or operating performance.
Yes. It is a radial rotary shaft oil seal, also commonly known as a Simmerring.
No. It is a CORTECO catalogue reference. Compatibility with a particular machine or vehicle requires separate verification.
CORTECO 12032093 is a radial rotary shaft oil seal with nominal dimensions of 85x110x12 mm. It uses FPM fluoroelastomer sealing material and carries the BAUMSLX7 construction profile designation. Designed to seal rotating shafts in suitable housings, it must be selected according to the complete part number, profile, dimensions and operating conditions.
simmering.pl supplies CORTECO rotary shaft oil seals, O-rings, bearings and other industrial sealing components for maintenance departments, machinery repair services and B2B customers.
For accurate identification, use the complete CORTECO part number 12032093 together with the BAUMSLX7 profile designation.
Our warehouse is located in Lublin, Poland, with stock in Poland and worldwide shipping.
Data sheet
You might also like
CORTECO 12032093 85x110x12 mm FPM BAUMSLX7 is a radial rotary shaft oil seal, also known as a Simmerring. Nominal shaft diameter 85 mm, housing bore diameter 110 mm and axial width 12 mm. FPM fluoroelastomer sealing material provides good resistance to many mineral oils and industrial greases. The BAUMSLX7 profile is an important construction characteristic and must be considered when selecting replacements. CORTECO sealing component for appropriately designed rotating shaft applications. Available at simmering.pl, stock in Poland and worldwide shipping.
