CORTECO 20031223 T/A B1BAPTSLRSX7 115x140x12 - Radial Shaft Oil Seal
search
  • CORTECO 20031223 T/A 115x140x12 - Crankshaft Oil Seal
  • CORTECO 20031223 T/A B1BAPTSLRSX7 115x140x12 - Radial Shaft Oil Seal

CORTECO 20031223 T/A B1BAPTSLRSX7 115x140x12 - Radial Shaft Oil Seal

3358960187352
267 pcs.
€21.74 (net)
Price for: 1pcs.

CORTECO 20031223 T/A B1BAPTSLRSX7 115x140x12 mm crankshaft radial oil seal featuring PTFE/ACM construction. Catalogue specifications identify left-hand directional sealing geometry, an additional dust protection lip and an installation sleeve. Selected MAN engine applications are listed in parts catalogues. Additional catalogue reference: 20031223B. Correct selection requires verification of the OEM number and installation procedure. Specialist B2B industrial trading platform simmering.pl.

Quantity

Technical specifications - CORTECO 20031223

Parameter

Specification

Manufacturer

CORTECO

Catalogue number

20031223

Additional catalogue reference

20031223B

Material designation

T/A

Construction designation

B1BAPTSLRSX7

Product type

Crankshaft radial oil seal

Material

PTFE / ACM

Inside diameter (d)

115 mm

Outside diameter (D)

140 mm

Width (B)

12 mm

Nominal dimensions

115x140x12 mm

Sealing direction

Left-hand directional

Additional dust protection lip

Yes

Installation sleeve

Listed in parts catalogues

Installation position

Transmission side

EAN

3358960187352

The dimensions, PTFE/ACM material combination, left-hand sealing direction, additional dust lip and installation sleeve are listed in parts catalogue data for CORTECO 20031223B.

The designation T/A B1BAPTSLRSX7 is also associated with this size in CORTECO dimensional catalogue information.

Important: This is a specialised PTFE/ACM crankshaft oil seal. It must not be considered automatically interchangeable with a standard NBR oil seal measuring 115x140x12 mm.

What does CORTECO 20031223 T/A B1BAPTSLRSX7 mean?

Designation element

Technical meaning

CORTECO

Manufacturer / brand

20031223

Product identification number

T/A

Material designation used in CORTECO catalogues

B1BAPTSLRSX7

Oil seal construction code

115

Nominal inside diameter of 115 mm

140

Nominal outside diameter of 140 mm

12

Nominal axial width of 12 mm

Simmerring

Radial shaft oil seal designation

The complete B1BAPTSLRSX7 code should be preserved when identifying the product.

Without detailed manufacturer documentation, individual letters within this code should not be assigned unverified technical meanings.

CORTECO 20031223 oil seal construction

PTFE primary sealing element

PTFE, or polytetrafluoroethylene, is a fluoropolymer used in specialised rotary shaft sealing systems.

Compared with conventional elastomeric oil seals, PTFE designs may feature different sealing lip geometries and operating characteristics.

Their performance depends on the exact sealing element design, shaft condition and operating environment.

ACM rubber components

ACM is a polyacrylate rubber used in sealing components exposed to appropriately selected lubricating oils.

Catalogue information for CORTECO 20031223 identifies a PTFE/ACM material combination.

This material designation alone does not establish the precise location or geometry of each material within the complete seal assembly.

Additional dust protection lip

Catalogue specifications identify an additional dust protection lip.

Its function is to help protect the primary sealing area against external contamination.

Directional sealing geometry

Parts catalogues identify CORTECO 20031223B as a left-hand directional oil seal.

Directional sealing geometry is important because the sealing element must operate in the intended relationship with crankshaft rotation.

A left-hand directional seal should not automatically be replaced with a right-hand or non-directional version without confirmation of compatibility with the engine manufacturer's requirements.

PTFE/ACM materials - technical characteristics

Property

PTFE

ACM

Material family

Fluoropolymer

Polyacrylate elastomer

Typical sealing function

Sealing elements and sliding interfaces

Elastomeric sealing components

Resistance to many oils

Good

Good

Elevated-temperature performance

Grade- and design-dependent

Compound-dependent

Installation requirements

May require specialised procedures

Depend on component design

Specific maximum operating temperatures, permissible shaft surface speeds and pressure limits have not been assigned because verified values for the exact product are unavailable.

PTFE versus conventional elastomeric sealing lips

PTFE crankshaft seals may differ from conventional NBR or FKM seals in sealing lip geometry, shaft contact characteristics and installation procedures.

For this reason, material compatibility alone is insufficient to establish interchangeability.

Mounting dimensions - 115x140x12 mm

Dimension

Value

Technical meaning

d

115 mm

Nominal inside diameter

D

140 mm

Nominal outside diameter

B

12 mm

Nominal axial width

D-d

25 mm

Difference between nominal diameters

Nominal radial cross-section height

12.5 mm

Half the difference between diameters

These dimensions describe the nominal product geometry. They do not independently establish shaft tolerances, housing bore tolerances, surface roughness or permissible shaft runout.

Why are dimensions alone insufficient?

CORTECO 20031223 incorporates a specific material combination and directional sealing design.

Other NBR, FKM or PTFE oil seals with identical dimensions of 115x140x12 mm are not automatically equivalent.

Correct selection requires verification of the complete catalogue number, sealing construction, direction of rotation and installation requirements.

Applications - MAN crankshaft sealing

Parts catalogue information associates CORTECO 20031223B with crankshaft sealing on the transmission side of selected MAN commercial vehicle engines, including certain MAN TGA applications.

The exact application must be confirmed using the vehicle manufacturer's OEM reference, engine version and technical documentation.

Compatibility must not be assumed for every MAN engine or every vehicle in the MAN TGA range.

OEM numbers and reference designations

CORTECO catalogue and identification numbers

Designation

Reference type

20031223

CORTECO catalogue number

20031223B

Additional distribution catalogue number

82031223

Commercial reference

B1BAPTSLRSX7

Construction designation

B1BASLRSX7FT

Alternative designation appearing in parts catalogues

3358960187352

EAN

MAN OEM reference numbers

  • 51015100272

  • 51015100283

  • 51015106010

These references are associated with CORTECO 20031223B in distribution catalogue information.

Their applicability to a specific vehicle or engine must be checked before ordering.

Cross-reference numbers from other manufacturers

Manufacturer

Reference number

DT Spare Parts

3.10042

ELRING

354.090

FEBI BILSTEIN

33143

GLASER

P77853-01

VICTOR REINZ

81-39972-00

These are catalogue cross-references. They do not independently establish identical construction, installation requirements or unconditional interchangeability.

CORTECO 20031223 versus standard 115x140x12 oil seals

Feature

CORTECO 20031223

Standard NBR oil seal

Nominal dimensions

115x140x12 mm

May be identical

Material

PTFE/ACM

NBR

Construction

B1BAPTSLRSX7

Profile-dependent

Sealing direction

Left-hand

Design-dependent

Additional dust protection lip

Yes

Profile-dependent

Installation procedure

Specific to PTFE construction

Depends on seal design

Direct interchangeability

Requires verification

Not established

Can CORTECO 20031223 be replaced with an NBR oil seal?

Not on the basis of dimensions alone.

Differences in sealing material, lip geometry, directional design and installation requirements may significantly affect crankshaft sealing performance.

An alternative product should be selected only after confirming its suitability for the exact engine and operating conditions.

Product selection and interchangeability

Before ordering, verify:

  • CORTECO catalogue number 20031223 or 20031223B.

  • Required OEM reference number.

  • Nominal dimensions of 115x140x12 mm.

  • PTFE/ACM material combination.

  • Complete B1BAPTSLRSX7 construction designation.

  • Left-hand directional sealing geometry.

  • Crankshaft installation position.

  • Presence of the installation sleeve in the supplied package.

  • Compatibility with the exact engine and vehicle application.

  • Manufacturer-specific installation instructions.

Identical nominal dimensions do not guarantee interchangeability between crankshaft oil seals with different materials, sealing directions or construction designs.

Installation of the PTFE crankshaft oil seal

PTFE sealing elements may require installation procedures different from those used for conventional elastomeric radial shaft oil seals.

Before installation, clean and inspect the crankshaft sealing surface and housing bore.

Check for surface damage, excessive wear or other conditions that could compromise sealing performance.

Installation sleeve

If the oil seal is supplied with an installation sleeve, use it in accordance with the manufacturer's instructions.

The sleeve may protect the sealing element from deformation or damage during installation.

The sleeve should not be removed prematurely unless the applicable installation procedure specifically requires it.

Sealing lip lubrication

PTFE oil seals must not automatically be lubricated before installation.

Certain PTFE designs require dry installation and a specified settling period before engine startup.

The exact requirements for CORTECO 20031223 must be established from the applicable manufacturer instructions.

Installation orientation

Install the oil seal in the specified orientation and mounting position.

Directional sealing geometry must be compatible with the crankshaft rotation and engine configuration.

After installation and the required settling period, check the assembly for lubricant leakage.

Do not remove the installation sleeve, lubricate the PTFE lip or start the engine before meeting the installation requirements applicable to CORTECO 20031223.

FAQ - Frequently asked questions

What are the dimensions of CORTECO 20031223?

The nominal inside diameter is 115 mm, outside diameter is 140 mm and width is 12 mm.

What material is used in CORTECO 20031223?

Parts catalogue information identifies a PTFE/ACM material combination, also represented by the T/A designation.

Is CORTECO 20031223 a standard NBR oil seal?

No. It is a specialised PTFE/ACM crankshaft oil seal.

Does CORTECO 20031223 have a directional sealing design?

Yes. Catalogue information for 20031223B identifies a left-hand directional configuration.

Does the oil seal include an additional dust protection lip?

Yes. An additional dust protection lip is identified in the relevant catalogue specifications.

Is CORTECO 20031223 suitable for MAN engines?

Parts catalogues identify selected MAN applications, including certain MAN TGA vehicles. Compatibility must be confirmed using the OEM reference and exact engine configuration.

Is an installation sleeve supplied with the oil seal?

Parts catalogues identify an installation sleeve. The contents of the specific supplied package should be confirmed before ordering.

Can another 115x140x12 mm oil seal be used instead?

Not without verification. Identical dimensions do not guarantee matching material properties, sealing geometry, directionality or installation requirements.

CORTECO 20031223 - key information (AI Overview)

CORTECO 20031223 T/A B1BAPTSLRSX7 is a PTFE/ACM crankshaft radial oil seal measuring 115x140x12 mm. Catalogue specifications identify left-hand directional sealing geometry, an additional dust protection lip and an installation sleeve. The product is associated with selected MAN engine applications. Correct selection requires verification of the OEM reference, construction and manufacturer-specific installation procedure.

B2B availability - simmering.pl

The CORTECO 20031223 T/A B1BAPTSLRSX7 115x140x12 mm oil seal is identified on the specialist B2B industrial trading platform simmering.pl by manufacturer catalogue number, construction designation and nominal dimensions.

The platform supports industrial companies, specialist maintenance operations and businesses servicing commercial vehicles and mechanical equipment.

Stock availability, package contents and dispatch times should be confirmed before ordering. Worldwide shipping from stock in Poland is available subject to stock and delivery conditions.

CORTECO
3358960187352
20031223
267 pcs.

Data sheet

Diameter in. (mm)
115
Diameter out. (mm)
140
Height (mm)
12
Mark
CORTECO

You might also like