CRAFT NJ 2213 M 65x120x31 mm single-row cylindrical roller bearing, dimensional series 22. NJ design with two outer ring flanges and one inner ring flange. Brass cage M, open and separable construction. Accommodates radial loads and axial loads in one direction. Inside diameter 65 mm, outside diameter 120 mm, width 31 mm. Specialist B2B industrial trading platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Brand |
CRAFT |
|
Full designation |
NJ 2213 M |
|
Bearing type |
Single-row cylindrical roller bearing |
|
Design |
NJ |
|
Dimensional series |
22 |
|
Inside diameter (d) |
65 mm |
|
Outside diameter (D) |
120 mm |
|
Width (B) |
31 mm |
|
Rolling elements |
Cylindrical rollers |
|
Number of rows |
1 |
|
Outer ring flanges |
2 |
|
Inner ring flanges |
1 |
|
Cage |
Brass, designation M |
|
Sealing arrangement |
Open, without integrated seals |
|
Separable construction |
Yes |
|
Radial load capacity |
Yes |
|
Axial load capacity |
One direction |
|
Nominal dimensions |
65x120x31 mm |
The basic dynamic load rating C, basic static load rating C0, fatigue load limit Pu, permissible rotational speeds, bearing weight, radial internal clearance and detailed cage construction must be confirmed using CRAFT technical documentation for the exact NJ 2213 M designation.
|
Designation element |
Technical meaning |
|---|---|
|
N |
Cylindrical roller bearing |
|
NJ |
Design with two outer ring flanges and one inner ring flange |
|
22 |
Dimensional series 22 |
|
13 |
Bore code corresponding to 65 mm |
|
M |
Brass cage designation |
|
CRAFT |
Bearing brand |
The NJ designation identifies the arrangement of flanges that guide the cylindrical rollers.
The outer ring has two integral flanges, while the inner ring has one.
This construction enables the bearing to accommodate substantial radial loads and locate the shaft axially in one direction.
In the opposite direction, the design permits relative axial displacement between the rings, depending on the bearing geometry and mounting arrangement.
Series 22 defines the dimensional proportions of the bearing.
For NJ 2213 M, the nominal dimensions are:
d = 65 mm.
D = 120 mm.
B = 31 mm.
Bore code 13 corresponds to an inside diameter of 65 mm.
13 x 5 = 65 mm.
The M suffix identifies a brass cage design.
However, the exact cage guidance method, riveted construction or special precision class must not be inferred from the designation conventions of other manufacturers.
The detailed interpretation of the M execution should be verified against CRAFT documentation.
The outer ring has a nominal outside diameter of 120 mm and two integral flanges that guide the cylindrical rollers.
These flanges restrict axial movement of the rollers relative to the outer ring.
The inner ring has a bore diameter of 65 mm and one integral flange.
Together with the flange arrangement of the outer ring, it enables axial shaft location in one direction.
Cylindrical rollers contact the raceways along a line-like contact zone, unlike the approximately point-like contact between balls and raceways in ball bearings.
This geometry makes cylindrical roller bearings suitable for substantial radial loads.
The cage maintains appropriate spacing between the rollers and guides them during rotation.
The M designation indicates a brass cage. Its exact guidance arrangement requires confirmation for the CRAFT version.
In an NJ bearing, the inner ring can be separated from the outer ring assembly containing the rollers and cage.
This facilitates installation of the shaft and housing, particularly in arrangements where the bearing rings must be mounted separately.
The primary function of NJ 2213 M is to accommodate radial loads.
Its radial stiffness results from the cylindrical roller geometry and the contact between the rollers and raceways.
The NJ design also allows axial loading in one direction.
Axial force is transmitted through the roller end faces and bearing ring flanges.
Permissible axial loading depends on lubrication, rotational speed, contact geometry and heat dissipation.
The axial load capacity must not be confused with the catalogue basic dynamic radial load rating C.
An NJ bearing can act as an axial locating bearing in one direction.
If the shaft requires axial location in both directions, the second support must be designed accordingly, or a different bearing arrangement must be selected.
The CRAFT catalogue lists the following values for the basic NJ2213 designation:
|
Parameter |
NJ2213 catalogue value |
|---|---|
|
Inside diameter (d) |
65 mm |
|
Outside diameter (D) |
120 mm |
|
Width (B) |
31 mm |
|
Basic dynamic load rating (C) |
149 kN |
|
Basic static load rating (C0) |
181 kN |
|
Limiting speed, grease lubrication |
4800 rpm |
|
Limiting speed, oil lubrication |
6400 rpm |
|
Weight |
1.488 kg |
|
GOST designation |
42513 |
These values refer to the basic NJ2213 catalogue entry from CRAFT. Since a separate specification table for NJ 2213 M has not been confirmed, they are reference data for the basic series rather than verified specifications for the exact M-cage version.
Bearing life calculations, maximum operating speed assessments and limiting operating conditions should be based on parameters confirmed for the specific execution.
Common designation variations include:
NJ 2213 M CRAFT
CRAFT NJ 2213 M
NJ2213M CRAFT
NJ 2213 M 65x120x31
CRAFT NJ2213M 65x120x31
NJ 2213 M cylindrical roller bearing
CRAFT NJ 2213 M single-row cylindrical roller bearing
For the basic NJ2213 bearing, the CRAFT catalogue lists GOST designation 42513.
However, this does not confirm that every bearing designated 42513 has the same cage construction as NJ 2213 M.
|
Variant |
Construction |
Axial function |
|---|---|---|
|
NU 2213 |
Two outer ring flanges, no inner ring flanges |
Allows relative axial displacement in both directions |
|
NJ 2213 M |
Two outer ring flanges, one inner ring flange, M cage |
Axial location in one direction |
|
NUP 2213 |
Two outer ring flanges, one integral and one loose inner ring flange |
Axial location in both directions |
|
NJ 2213 with HJ angle ring |
NJ construction supplemented by a suitable angle ring |
Can provide axial location in both directions when correctly configured |
All these basic bearing designs in the 2213 series may share nominal dimensions of 65x120x31 mm, but they do not perform the same mechanical function.
An NU bearing allows axial displacement of the shaft relative to the housing in both directions within the bearing.
An NJ bearing provides axial location in one direction.
The correct choice depends on whether the bearing position must function as a locating or non-locating support.
An NUP bearing has an additional loose flange ring.
This allows axial shaft location in both directions.
Replacing an NJ bearing with an NUP design changes the function of the support and may prevent compensation for thermal expansion of the shaft.
|
Parameter |
NJ 2213 M |
NJ 213 M |
|---|---|---|
|
Inside diameter |
65 mm |
65 mm |
|
Outside diameter |
120 mm |
120 mm |
|
Width |
31 mm |
23 mm |
Despite having identical bore and outside diameters, these bearings differ in width by 8 mm.
They are not directly interchangeable without considering the mounting arrangement.
Before selecting the bearing, verify:
Complete designation NJ 2213 M.
Nominal dimensions of 65x120x31 mm.
NJ flange arrangement.
M cage construction.
Required radial internal clearance class.
Basic dynamic and static load ratings.
Radial loads.
Direction and magnitude of axial loads.
Rotational speed.
Lubrication method.
Bearing ring fits.
Operating temperature.
Required compensation for shaft thermal expansion.
Matching dimensions of 65x120x31 mm do not automatically establish interchangeability between NJ, NU and NUP bearings.
Differences in flange arrangements can fundamentally change the operation of the entire bearing assembly.
NJ-type cylindrical roller bearings are used in assemblies subjected to substantial radial loads where axial shaft location is required in one direction.
Typical application areas for this bearing design include:
Industrial gearboxes.
Shafts in production machinery.
Mechanical power transmission systems.
Bearing arrangements in machine tools.
Industrial equipment with radially loaded shafts.
These are characteristic applications of the NJ bearing design, not confirmed OEM applications of the specific CRAFT NJ 2213 M designation.
Before installation, check the cleanliness of the shaft, housing and bearing seats.
Do not install a bearing with visible damage to the raceways or rolling elements.
The separable construction allows the rings to be installed individually.
Mounting force must be applied directly to the ring being fitted with interference, without transmitting installation force through the rollers.
Proper alignment between the shaft and housing must be ensured.
Excessive misalignment may cause uneven load distribution along the roller length.
The open construction requires appropriate lubrication and protection against contamination.
When axial loads are present, lubrication of the contact surfaces between the roller ends and ring flanges is particularly important.
The bearing should be stored in a clean, dry environment, preferably in its original packaging until installation.
The bearing has an inside diameter of 65 mm, an outside diameter of 120 mm and a width of 31 mm.
NJ identifies a cylindrical roller bearing with two flanges on the outer ring and one flange on the inner ring. This arrangement allows axial shaft location in one direction.
M indicates a brass cage. The detailed cage guidance method should be confirmed using CRAFT technical documentation.
Yes, in one direction. Its primary function remains the accommodation of radial loads.
Not automatically. Their flange arrangements differ. NU allows relative axial displacement in both directions, while NJ provides axial location in one direction.
The NJ 2213 M designation does not include the C3 suffix. Increased radial internal clearance must not be assumed without manufacturer confirmation.
Yes. The inner ring can be separated from the outer ring assembly containing the rollers and cage, facilitating installation.
Only after verifying the complete designation, NJ construction, cage, internal clearance, load ratings and application requirements. Identical dimensions alone do not confirm interchangeability.
NJ 2213 M CRAFT is a single-row cylindrical roller bearing measuring 65x120x31 mm. Its NJ design has two outer ring flanges and one inner ring flange, providing axial shaft location in one direction. The M suffix identifies a brass cage. The bearing has a separable construction and is primarily designed to accommodate radial loads.
The specialist B2B industrial trading platform simmering.pl supplies CRAFT bearings for industrial applications and maintenance operations. Component selection is supported by complete catalogue designations, dimensions and technical requirements, with worldwide shipping from stock in Poland.
You might also like