GRN 40x62x7 VMQ/MVQ TC AO is a double-lip silicone rotary shaft oil seal featuring a spring-loaded primary sealing lip, an auxiliary dust lip, metal reinforcement and an elastomer-coated outside diameter. Silicone rubber offers excellent low-temperature flexibility and good resistance to elevated temperatures. Selection requires verification of lubricant compatibility, operating temperature, shaft speed and lubrication conditions. Specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Manufacturer / brand |
GRN |
|
Product designation |
40x62x7 TC AO VMQ/MVQ |
|
Product type |
Radial rotary shaft oil seal |
|
Technical description |
Double-lip silicone oil seal |
|
Seal design |
TC / AO |
|
Inside diameter d |
40 mm |
|
Outside diameter D |
62 mm |
|
Width b |
7 mm |
|
Nominal dimensions |
40x62x7 mm |
|
Elastomer material |
VMQ / MVQ - silicone rubber |
|
Number of lips |
2 |
|
Primary sealing lip |
Spring-loaded |
|
Auxiliary lip |
Dust-exclusion lip |
|
Garter spring |
Yes |
|
Reinforcing case |
Metal, according to TC construction |
|
Outside surface |
Elastomer-coated |
|
Sealing principle |
Dynamic contact sealing |
|
Application |
Rotating shafts |
|
Nominal shaft diameter |
40 mm |
|
Nominal housing bore diameter |
62 mm |
|
Diameter difference D-d |
22 mm |
|
Nominal radial installation space |
11 mm |
|
Directional pumping features |
Not specified in the designation |
|
Primary lip lubrication |
Required |
|
Operating temperature range |
Depends on the specific VMQ compound |
|
Maximum shaft surface speed |
Requires confirmation for the specific execution |
|
Permissible operating pressure |
Requires confirmation for the specific execution |
|
Elastomer hardness |
Not specified in the designation |
|
Chemical compatibility |
Depends on the medium and silicone compound |
The dimensions, material and basic construction characteristics are identified by the product designation. Specific operating limits must be confirmed in the technical documentation for the exact GRN execution.
The first number identifies the nominal shaft diameter of 40 mm.
The primary sealing lip operates against the rotating shaft surface, forming a dynamic contact seal.
Correct sealing performance depends on shaft diameter, dimensional tolerance, surface roughness, hardness, concentricity and the condition of the working surface.
Damage, corrosion or wear grooves may cause leakage even after installing a new oil seal.
The second number identifies the nominal outside diameter of the seal, which is 62 mm.
This corresponds to the nominal housing bore diameter.
The elastomer-coated outside surface helps establish static sealing between the seal body and the housing.
The third number identifies the nominal axial width of 7 mm.
This dimension is important for installation depth and the available mounting space.
When replacing an existing seal, the position of the primary sealing lip relative to the shaft contact surface must also be considered.
The TC and AO designations refer to a radial shaft seal featuring an additional dust-exclusion lip.
In GRN terminology:
TC - construction featuring an elastomer-coated outside diameter, a spring-loaded primary sealing lip and an auxiliary dust lip.
AO - double-lip seal construction.
These designations describe corresponding basic construction types.
However, they do not automatically establish interchangeability between products from different manufacturers.
VMQ identifies silicone rubber based on methyl-vinyl siloxane polymers.
The alternative designation MVQ is also encountered in commercial product descriptions.
The main material characteristics include:
Excellent flexibility at low temperatures.
Good resistance to elevated temperatures.
Resistance to ozone and atmospheric oxygen.
Resistance to atmospheric aging.
Retention of elastic properties across a broad temperature range.
However, silicone rubber has limitations concerning abrasion resistance, tear resistance and compatibility with certain chemical media.
The primary sealing lip restricts lubricant leakage along the rotating shaft.
Its flexible working edge remains in contact with the shaft surface.
Under correct operating conditions, a thin lubricating film should be maintained between the lip and shaft.
This film reduces friction, heat generation and material wear.
Dry running may cause overheating and premature sealing lip damage.
The circumferential garter spring helps maintain appropriate contact pressure between the primary sealing lip and the shaft.
It supports consistent sealing contact during temperature changes and gradual wear of the working surface.
The spring must not be removed or modified.
The second lip is positioned on the external side of the seal.
It restricts dust and other contaminants from entering the primary sealing area.
It is not a second independent oil-retaining seal.
It also does not automatically provide protection against pressurized water.
The metal reinforcing case strengthens the seal construction.
It helps maintain the correct geometry during installation and operation.
The outside surface is coated with elastomer.
This helps restrict leakage between the seal body and the housing bore.
Sealing effectiveness also depends on the dimensional tolerance and surface condition of the housing.
VMQ silicone rubber provides good thermal resistance.
Depending on the formulation, general material operating ranges may extend to approximately +200°C.
This is not a confirmed maximum operating temperature for the GRN 40x62x7 oil seal.
In dynamic sealing applications, permissible operating temperature also depends on:
Shaft surface speed.
Sealing lip contact pressure.
Lubricant type and quantity.
Heat dissipation conditions.
Shaft surface roughness.
Equipment operating conditions.
The temperature at the lip-to-shaft contact may exceed the surrounding ambient temperature.
VMQ retains favorable elastic properties at low temperatures.
For selected silicone compounds, general lower operating temperature limits may approach -50°C.
This is a general material characteristic, not a confirmed minimum operating temperature for the exact GRN product.
Silicone rubber provides good resistance to oxygen, ozone and atmospheric exposure.
These properties can help limit elastomer degradation during storage and operation.
Compared with certain other elastomers, silicone rubber may exhibit lower abrasion and tear resistance.
Therefore, VMQ should not automatically be selected for applications involving high shaft surface speeds, severe dust exposure or insufficient lubrication.
|
Medium or operating condition |
General VMQ characteristics |
|---|---|
|
Air |
Very good resistance |
|
Ozone |
Very good resistance |
|
Low temperatures |
Excellent flexibility |
|
Elevated temperatures |
Good material resistance |
|
Selected mineral oils |
Potential compatibility depending on composition |
|
Industrial greases |
Verification required |
|
Gasoline |
Generally not recommended |
|
Aromatic solvents |
Generally not recommended |
|
Strong acids and alkalis |
Individual assessment required |
|
Steam |
Potential limitations depending on conditions |
This table describes general VMQ material properties and does not confirm chemical resistance for the exact GRN seal.
Industrial oils differ in their base fluid composition and chemical additives.
Certain components may cause elastomer swelling, changes in hardness or deterioration of mechanical properties.
For this reason, compatibility must be checked against the specific lubricant.
|
Material |
Main advantages |
Typical limitations |
|---|---|---|
|
VMQ/MVQ |
Low-temperature flexibility and heat resistance |
Lower abrasion and tear resistance |
|
NBR |
Good resistance to many mineral oils and favorable mechanical properties |
Lower high-temperature resistance |
|
FKM/FPM |
High thermal and chemical resistance with compatible media |
Low-temperature limitations depending on compound |
|
ACM |
Good resistance to hot oils in suitable applications |
Limitations involving certain media and low temperatures |
NBR is widely used in shaft sealing applications involving mineral oils.
VMQ may be more suitable where flexibility at very low temperatures is important.
However, silicone rubber should not automatically be expected to provide a longer service life under all conditions.
FKM is frequently used in demanding oil-sealing applications at elevated temperatures.
VMQ offers favorable properties at low temperatures.
Replacing one material with the other requires verification of chemical compatibility and mechanical operating conditions.
|
Feature |
TC / AO |
SC |
|---|---|---|
|
Primary sealing lip |
Yes |
Yes |
|
Garter spring |
Yes |
Yes |
|
Additional dust lip |
Yes |
No |
|
Elastomer-coated outside diameter |
Yes |
Yes |
|
Dust protection |
Additional lip |
No additional lip |
|
Frictional resistance |
May be higher |
Generally lower |
|
Primary application |
Shaft sealing with additional contamination protection |
Standard rotary shaft sealing |
The TC/AO construction combines two functions:
The primary lip restricts lubricant leakage.
The auxiliary lip helps prevent contaminants from entering the sealing area.
This can be beneficial in equipment exposed to moderate dust contamination.
However, the additional lip does not replace specialized sealing systems designed for severe dust exposure, mud or pressurized water.
The GRN 40x62x7 oil seal has a nominal diameter difference of 22 mm.
This corresponds to a nominal radial installation space of 11 mm between the shaft and the housing bore.
The value is calculated as follows:
This is a geometric dimension, not the actual thickness of the elastomer or metal reinforcing case.
The radial installation space determines the space available for the seal body and its construction elements.
When selecting a replacement, the shaft diameter, housing bore diameter, seal width and construction type must all be considered.
A 40x62x7 oil seal is not directly interchangeable with a 40x60x7 seal because the outside diameters are different.
Common product designation variations include:
GRN 40x62x7 VMQ TC AO
GRN 40x62x7 MVQ TC AO
GRN 40x62x7 silicone oil seal
40x62x7 VMQ rotary shaft seal
40x62x7 VMQ TC
40x62x7 MVQ AO
GRN TC 40x62x7 silicone
40x62x7 VMQ double-lip oil seal
40x62x7 TC AO silicone shaft seal
GRN 40x62x7 silicone rotary shaft seal
These are alternative product descriptions and search variations, not verified replacement part numbers from other manufacturers.
Before ordering the GRN 40x62x7 VMQ/MVQ TC AO oil seal, verify:
Nominal shaft diameter: 40 mm.
Nominal housing bore diameter: 62 mm.
Seal width: 7 mm.
TC/AO construction.
VMQ/MVQ silicone material.
Presence of the garter spring.
Presence of the auxiliary dust lip.
Type of sealed medium.
Operating temperature.
Shaft surface speed.
Shaft surface condition and roughness.
Pressure inside the sealed housing.
Lubrication conditions.
Matching dimensions of 40x62x7 mm do not automatically establish interchangeability between seals manufactured from different elastomers.
Such a replacement may be possible, but it requires verification of chemical compatibility, operating temperature, shaft surface speed and mechanical operating conditions.
These seals are not directly interchangeable.
They have different outside diameters: 62 mm and 60 mm.
They require housing bores with different nominal diameters.
Direct interchangeability should not be assumed.
The difference in width can affect the position of the sealing lip relative to the shaft and how the seal is seated inside the housing.
VMQ/MVQ silicone rotary shaft seals may be used in appropriately designed equipment where low-temperature flexibility or resistance to elevated temperatures is important.
Potential application categories include:
Industrial rotating assemblies.
Production machinery.
Mechanisms with 40 mm diameter shafts.
Equipment operating under changing temperature conditions.
Selected gearboxes and mechanical assemblies using media compatible with VMQ.
Equipment requiring additional protection of the sealing area against dust.
These are general application categories, not a confirmed list of OEM applications for the exact GRN seal.
The shaft surface should be clean, smooth and free from damage.
Inspect the sealing contact area for wear grooves, corrosion and sharp edges.
A damaged shaft surface can cause leakage even after installing a new seal.
The sealing lip should not be pulled directly across threads, grooves or sharp edges.
Use a protective installation sleeve where necessary.
Silicone rubber can be vulnerable to mechanical damage caused by incorrect installation.
Before starting the equipment, provide suitable lubrication at the primary sealing lip.
The lubricant must be compatible with VMQ silicone rubber.
Dry running must be avoided.
In a typical application, the primary spring-loaded sealing lip should face the medium being retained.
The auxiliary dust lip should face the external environment.
Press the seal evenly into the housing using an appropriate installation tool.
Do not strike the elastomer directly or deform the metal reinforcing case.
After installation, verify correct seating and the position of the garter spring.
The nominal dimensions are 40x62x7 mm. The seal is designed for a 40 mm shaft and a 62 mm housing bore.
VMQ/MVQ identifies silicone rubber used in industrial sealing applications. It offers low-temperature flexibility and good resistance to elevated temperatures.
TC/AO identifies a double-lip construction with a spring-loaded primary sealing lip and an auxiliary dust-exclusion lip.
Yes. The TC/AO construction includes a circumferential garter spring supporting the primary sealing lip.
It may be suitable for selected oils, but compatibility depends on the silicone compound, lubricant composition and operating conditions.
Not in every application. VMQ offers favorable temperature-related properties, while NBR may provide better mechanical resistance and compatibility with many mineral oils.
Yes. The additional lip helps restrict dust from entering the primary sealing area. However, it does not provide complete protection against all contaminants.
No. They have different outside diameters and require housing bores with different dimensions.
GRN 40x62x7 TC AO VMQ/MVQ is a double-lip silicone rotary shaft oil seal. It features a spring-loaded primary sealing lip, an auxiliary dust lip, metal reinforcement and an elastomer-coated outside diameter. VMQ provides low-temperature flexibility and good heat resistance. Proper selection requires verification of medium compatibility, operating temperature, shaft speed and lubrication conditions.
The product is offered through the specialist B2B industrial supply platform simmering.pl, serving industrial procurement departments, technical distributors and maintenance teams, with worldwide shipping from stock in Poland.
Data sheet
You might also like