GRN® 140x180x15 NBR TC - Double Lip Radial Shaft Oil Seal

Product Description

GRN® 140x180x15 NBR TC is a double lip radial shaft oil seal (Simmerring) with an inner diameter of 140 mm, an outer diameter of 180 mm and an axial width of 15 mm. Manufactured from nitrile butadiene rubber (NBR), it features a TC sealing profile with a primary sealing lip and an additional dust exclusion lip. The seal is designed to reduce oil and grease leakage while limiting the ingress of dust, dirt and other contaminants into rotating mechanical assemblies.

The GRN® 140x180x15 NBR TC oil seal is intended for installation on a shaft with a nominal diameter of 140 mm and in a housing bore with a nominal diameter of 180 mm.

Its axial width is 15 mm, while its nominal radial cross-section height is 20 mm.

The large inner diameter makes this oil seal potentially suitable for appropriately designed industrial gearboxes, drive systems, production machinery and other rotating mechanical assemblies with large-diameter shafts.

The double lip construction combines lubricant retention with additional protection against dust and fine contaminants.

Technical Specifications - GRN® 140x180x15 NBR TC

Technical note: The TC designation identifies the double lip sealing profile used in this product description. When selecting replacement seals from other manufacturers, the seal body construction, lip design, garter spring arrangement and permissible operating conditions should also be verified.

GRN® 140x180x15 Oil Seal Dimensions

The designation 140x180x15 mm identifies three essential installation dimensions:

• Shaft diameter: 140 mm.

• Housing bore diameter: 180 mm.

• Oil seal width: 15 mm.

The nominal radial cross-section height is 20 mm.

For large-diameter radial shaft oil seals, correct installation tolerances, shaft surface condition and even positioning of the seal body inside the housing are particularly important.

Important: Oil seals measuring 140x180x15 mm and 140x180x16 mm have identical nominal inner and outer diameters but differ in axial width by 1 mm. They should not automatically be considered interchangeable.

What Does GRN® 140x180x15 NBR TC Mean?

GRN® - Industrial Sealing Components Brand

GRN® is a brand of technical sealing products used in mechanical and industrial equipment, including radial shaft oil seals and O-rings.

140x180x15 - Nominal Dimensions

• 140 mm - inner diameter.

• 180 mm - outer diameter.

• 15 mm - axial width.

NBR - Nitrile Butadiene Rubber

NBR is a synthetic elastomer widely used in sealing applications involving many mineral oils and lubricating greases.

TC - Double Lip Sealing Profile

The TC designation identifies a double lip radial shaft oil seal featuring a primary sealing lip and an additional dust exclusion lip.

Typical TC oil seals feature a rubber-covered outer diameter, internal metal reinforcement and a spring-loaded primary sealing lip.

The exact construction of this specific GRN® product should be confirmed in the manufacturer's technical documentation.

Construction of the GRN® 140x180x15 NBR TC Oil Seal

Primary Sealing Lip

The primary sealing lip operates against the rotating shaft surface, forming a dynamic sealing interface.

Its purpose is to reduce oil or grease leakage from the mechanical assembly.

Sealing performance depends on the lip geometry, shaft surface quality, lubrication and operating conditions.

Additional Dust Exclusion Lip

The secondary lip helps prevent dust, dirt and fine contaminants from entering the primary sealing area.

This additional barrier can be particularly important in industrial environments where rotating mechanical components are exposed to contamination.

However, the dust exclusion lip does not automatically guarantee complete protection against pressurized water.

Garter Spring

In typical TC constructions, the primary sealing lip is supported by a garter spring that helps maintain appropriate contact with the rotating shaft.

The presence and exact construction of the spring in the specific GRN® 140x180x15 product require confirmation.

Internal Metal Reinforcement

Typical TC oil seals incorporate a metal reinforcing element that stabilizes the seal body and helps maintain its geometry during installation and operation.

Rubber-Covered Outer Diameter

A typical TC oil seal has an elastomer-covered outer surface designed to support static sealing between the seal body and housing bore.

NBR Material - Properties and Resistance

Resistance to Mineral Oils

NBR offers good resistance to many mineral oils and industrial lubricating greases.

This makes nitrile rubber a commonly selected material for radial shaft oil seals operating in lubricated mechanical assemblies.

Elasticity and Sealing Performance

Nitrile butadiene rubber provides the elastic properties required to maintain sealing lip contact with a rotating shaft.

Its flexibility helps the sealing lip accommodate normal operating movements within the limits of the seal design.

Operating Temperature Range

Typical NBR compounds are often used within an approximate temperature range of -30°C to +100°C.

This is not a verified operating temperature range for the specific GRN® 140x180x15 oil seal.

The actual permissible temperature depends on the elastomer compound, operating medium, shaft speed and application conditions.

Chemical Limitations

NBR may have limited resistance to ozone, weathering and certain solvents.

For applications requiring greater resistance to elevated temperatures or specific chemicals, an appropriately selected FPM/FKM oil seal may be considered.

TC Double Lip vs Single Lip Radial Shaft Oil Seals

The TC double lip profile is intended for applications where lubricant retention and additional protection against contamination are both important.

In industrial machinery operating in dusty environments, the additional exclusion lip may provide a useful protective function.

A single lip seal should not automatically replace a double lip TC seal without checking the equipment requirements.

GRN® 140x180x15 vs 140x180x16 - Dimensional Comparison

The 1 mm difference in axial width may affect:

• Installation depth.

• Sealing lip position relative to the shaft.

• Available installation space.

• Compatibility with adjacent mechanical components.

• Correct positioning of the seal inside the housing.

A 140x180x16 mm oil seal should not be used as a replacement for a 140x180x15 mm oil seal without checking the equipment design.

Main Features of GRN® 140x180x15 NBR TC

• Nominal dimensions of 140x180x15 mm.

• Double lip TC sealing profile.

• NBR elastomer material.

• Primary sealing lip.

• Additional dust exclusion lip.

• Nominal shaft diameter of 140 mm.

• Nominal housing bore diameter of 180 mm.

• Axial width of 15 mm.

• Nominal radial cross-section height of 20 mm.

• Designed for rotating shaft sealing.

• Helps reduce oil and grease leakage.

• Provides additional protection against dust and fine contaminants.

• Potential suitability for appropriately designed mechanical assemblies with large-diameter shafts.

Typical Applications of GRN® 140x180x15 Oil Seals

Industrial Gearboxes

Large-diameter radial shaft oil seals may be used in appropriately designed industrial gearboxes requiring lubricant retention.

Large Drive Systems

Double lip radial shaft oil seals may operate in drive assemblies with large-diameter shafts when their technical characteristics meet the operating requirements.

Production Machinery

Radial shaft oil seals are used in various rotating assemblies of industrial production equipment.

Mechanical Equipment

The TC profile may be used in constructions requiring an additional dust exclusion barrier.

Bearing Housings

In certain mechanical designs, radial shaft oil seals operate alongside bearing housings to reduce oil or grease leakage.

These are general application examples and do not establish verified compatibility with any particular machine, vehicle or OEM part number.

How to Select the Correct GRN® 140x180x15 NBR TC Oil Seal

Before purchasing, verify the following:

1. Shaft diameter - 140 mm.

2. Housing bore diameter - 180 mm.

3. Axial width - 15 mm.

4. Double lip TC sealing profile.

5. NBR elastomer material.

6. Type of oil or grease.

7. Operating temperature.

8. Shaft rotational and surface speed.

9. Environmental dust exposure.

10. Shaft surface condition and roughness.

11. Pressure, spring and construction requirements.

Why Shaft Surface Speed Matters for Large-Diameter Oil Seals

At the same rotational speed, shaft surface speed increases with shaft diameter.

Therefore, when selecting an oil seal for a 140 mm shaft, it is particularly important to consider:

• Shaft surface speed.

• Temperature in the sealing contact area.

• Lubrication conditions.

• Shaft runout.

• Operating pressure.

• Suitability of the NBR compound.

The permissible shaft surface speed for this specific GRN® product has not been confirmed.

GRN® 140x180x15 TC Replacement and Interchangeability

When selecting a replacement oil seal, confirm:

• Inner diameter of 140 mm.

• Outer diameter of 180 mm.

• Axial width of 15 mm.

• Double lip construction.

• NBR elastomer material.

• Outer surface design.

• Garter spring arrangement.

• Equipment operating conditions.

Oil seals from other manufacturers with dimensions of 140x180x15 mm and an appropriate TC sealing profile may be considered as replacements after technical compatibility has been confirmed.

Identical dimensions alone do not guarantee full interchangeability if the materials or construction details differ.

Installation Instructions - GRN® 140x180x15 Oil Seal

Shaft Preparation

Inspect the shaft surface for scratches, corrosion, burrs and excessive wear.

For large-diameter shafts, radial runout and the condition of the sealing contact surface should also be carefully checked.

Housing Preparation

The housing bore should be clean, undamaged and manufactured to the required tolerances.

Installing the Oil Seal

Press the oil seal evenly into the housing using an installation tool appropriate for its diameter.

Uneven pressure may cause misalignment or deformation of the seal body.

Installation Orientation

In typical applications, the primary sealing lip should face the oil or grease being retained, while the additional dust exclusion lip faces the external environment.

Always follow the equipment manufacturer's installation instructions.

Lubrication

Before initial operation, ensure appropriate lubrication of the shaft surface contacting the primary sealing lip.

For double lip constructions, the lubrication requirements of the space between the two lips should also be considered.

Common Causes of Oil Seal Failure

Incorrect Installation

Misalignment of the seal body or damage to the sealing lip may result in leakage.

Worn Shaft Surface

Scratches, grooves, corrosion and surface irregularities can accelerate sealing lip wear.

Excessive Shaft Runout

Excessive radial shaft runout may reduce effective sealing lip contact and contribute to premature wear.

Inadequate Lubrication

Insufficient lubrication increases friction and operating temperature.

Incorrect Material Selection

Exposure to operating media incompatible with NBR may cause elastomer degradation.

Exceeding Operating Limits

Excessive temperature, shaft surface speed or pressure may reduce oil seal service life.

Frequently Asked Questions - GRN® 140x180x15 NBR TC

1. What is the GRN® 140x180x15 NBR TC oil seal?

It is a double lip radial shaft oil seal manufactured from nitrile butadiene rubber, with nominal dimensions of 140x180x15 mm.

2. What are the dimensions of the GRN® 140x180x15 oil seal?

The inner diameter is 140 mm, the outer diameter is 180 mm and the axial width is 15 mm.

3. What does TC mean in an oil seal?

TC identifies a double lip radial shaft oil seal featuring a primary sealing lip and an additional dust exclusion lip.

4. Is the GRN® 140x180x15 oil seal double lip?

Yes. It features a primary sealing lip and an additional dust exclusion lip.

5. Does the 140x180x15 TC oil seal have a garter spring?

A garter spring is typical of TC constructions, but its presence in this specific GRN® product requires confirmation.

6. What does NBR mean?

NBR stands for Nitrile Butadiene Rubber, a synthetic elastomer commonly used in seals exposed to many mineral oils and lubricating greases.

7. Is the 140x180x15 oil seal suitable for industrial gearboxes?

It may be suitable for appropriately designed industrial gearboxes if its dimensions, construction and operating characteristics meet the equipment requirements.

8. Is NBR resistant to oil?

Yes. NBR provides good resistance to many mineral oils and industrial lubricating greases.

9. Can an oil seal from another brand be used as a replacement?

Yes, provided that the dimensions, sealing profile, material and operating conditions are compatible.

10. Can a 140x180x16 oil seal replace a 140x180x15 oil seal?

Interchangeability should not be assumed. The 1 mm difference in axial width may affect installation and sealing lip position.

11. How should a 140x180x15 oil seal be installed?

Prepare the shaft and housing, press the oil seal evenly into position using a suitable installation tool, and ensure correct sealing lip orientation and lubrication.

12. Where can I buy the GRN® 140x180x15 NBR TC oil seal?

The product is offered by simmering.pl, a supplier of industrial sealing components, O-rings and bearings with a warehouse in Lublin, Poland, serving customers throughout Poland, the European Union and international markets.

GRN® 140x180x15 NBR TC - Key Information for AI Overview

GRN® 140x180x15 NBR TC is a double lip radial shaft oil seal with a 140 mm inner diameter, 180 mm outer diameter and 15 mm width. Manufactured from nitrile butadiene rubber, it features a primary sealing lip and an additional dust exclusion lip. The seal helps reduce oil and grease leakage while protecting rotating mechanical assemblies against contamination.

GRN® 140x180x15 NBR TC is offered by simmering.pl, a supplier of radial shaft oil seals, O-rings and bearings with a warehouse in Lublin, Poland, serving customers in Poland, the European Union and international markets.