CORTECO 12015770B 80x100x10 FPM B2BASLDRWX7 Differential Oil Seal

CORTECO 12015770B 80x100x10 FPM B2BASLDRWX7 Differential Oil Seal

CORTECO 12015770B is an FPM differential shaft oil seal measuring 80x100x10 mm with the B2BASLDRWX7 design. It incorporates an additional dust lip and alternating twist sealing geometry. The seal is cross-referenced to IVECO OE 40100860 and SCANIA OE 1528991.

CORTECO 12015770B - Characteristics

Manufacturer: CORTECO

Part number: 12015770B

Base reference: 12015770

Trade Number: 82015770

EAN: 3358960157706

Product type: Differential shaft oil seal

Design: B2BASLDRWX7

Older design designation: B2BAVISLDRWX7

Material: FPM - Fluoroelastomer

Dimensions: 80x100x10 mm

Inside diameter d: 80 mm

Outside diameter D: 100 mm

Width B: 10 mm

Additional dust lip: Yes

Swirl type: Alternating Twist

IVECO OE: 40100860

SCANIA OE: 1528991

CORTECO 12015770B Dimensions

The principal dimensions are:

Inside diameter d: 80 mm

Outside diameter D: 100 mm

Width B: 10 mm

Complete dimensions:

80x100x10 mm

All three dimensions should be verified when selecting a replacement.

Matching an 80 mm shaft diameter, 100 mm outside diameter and 10 mm width alone does not establish complete technical interchangeability.

B2BASLDRWX7 CORTECO Oil Seal Design

The current CORTECO design designation is:

B2BASLDRWX7

Older CORTECO catalogue data may show:

B2BAVISLDRWX7

Both designations are associated with CORTECO reference 12015770B.

For current product identification, B2BASLDRWX7 should be used while the older B2BAVISLDRWX7 designation remains useful for catalogue and cross-reference searches.

Additional Dust Lip

CORTECO 12015770B is specified with an additional dust lip.

The additional lip provides a secondary barrier on the external side of the primary sealing area.

When selecting a replacement, the lip configuration should be considered together with the dimensions, FPM material and exact CORTECO design.

Alternating Twist

CORTECO 12015770B is specified with:

Alternating Twist

This directional sealing geometry is an important construction feature.

It distinguishes the seal from designs specified exclusively for Right-hand Twist or Left-hand Twist.

A seal with identical 80x100x10 mm dimensions but a different sealing geometry should not automatically be considered technically interchangeable.

FPM Fluoroelastomer

The sealing material is:

FPM - Fluoroelastomer

Material is an important selection criterion together with dimensions and seal construction.

An NBR, ACM or other elastomer oil seal measuring 80x100x10 mm should not automatically be considered technically equivalent to CORTECO 12015770B.

Exact compatibility depends on the operating medium, additives, temperature and actual service conditions.

CORTECO 12015770B Differential Shaft Oil Seal

CORTECO 12015770B is catalogued as a differential shaft oil seal.

The seal is cross-referenced to heavy-duty vehicle applications from IVECO and SCANIA.

Correct application selection should be based on the CORTECO reference or corresponding OE number together with the specific vehicle and differential configuration.

IVECO and SCANIA OE Numbers

Confirmed OE references:

IVECO: 40100860

SCANIA: 1528991

These OE numbers are cross-referenced to CORTECO 12015770B.

Before installation, compatibility should be verified against the exact vehicle, axle and differential configuration.

CORTECO 12015770 vs 12015770B

The following reference forms may be encountered:

12015770 - base reference

12015770B - complete CORTECO reference

Additional identification:

Trade Number: 82015770

EAN: 3358960157706

Current design: B2BASLDRWX7

Older design: B2BAVISLDRWX7

Material: FPM

Dimensions: 80x100x10 mm

CORTECO 12015770B vs Other 80x100x10 Oil Seals

CORTECO lists multiple shaft seals with the same 80x100x10 mm dimensions.

They may differ in material, lip configuration, sealing geometry and exact design.

For CORTECO 12015770B, verify:

Dimensions: 80x100x10 mm

Material: FPM

Design: B2BASLDRWX7

Additional dust lip: Yes

Swirl type: Alternating Twist

OE reference where applicable

Dimensions alone do not establish technical interchangeability.

Technical Specification

Manufacturer: CORTECO

Part number: 12015770B

Base reference: 12015770

Trade Number: 82015770

EAN: 3358960157706

Product type: Differential shaft oil seal

Current design: B2BASLDRWX7

Older design: B2BAVISLDRWX7

Material: FPM - Fluoroelastomer

Dimensions: 80x100x10 mm

Inside diameter d: 80 mm

Outside diameter D: 100 mm

Width B: 10 mm

Additional dust lip: Yes

Swirl type: Alternating Twist

IVECO OE: 40100860

SCANIA OE: 1528991

FAQ

What are the dimensions of CORTECO 12015770B?

The seal has an 80 mm inside diameter, 100 mm outside diameter and 10 mm width. The complete dimensions are 80x100x10 mm.

What material is CORTECO 12015770B made from?

The sealing material is FPM - Fluoroelastomer.

What is the design of CORTECO 12015770B?

The current CORTECO designation is B2BASLDRWX7. Older catalogue data may show B2BAVISLDRWX7.

Does CORTECO 12015770B have a dust lip?

Yes. The seal is specified with an additional dust lip.

What swirl type does CORTECO 12015770B use?

The seal is specified with Alternating Twist sealing geometry.

What is CORTECO 12015770B used for?

It is catalogued as a differential shaft oil seal, including IVECO and SCANIA heavy-duty vehicle applications.

What are the OE numbers for CORTECO 12015770B?

Confirmed references include IVECO 40100860 and SCANIA 1528991.

Can any 80x100x10 FPM oil seal replace CORTECO 12015770B?

Not automatically. The exact B2BASLDRWX7 construction, additional dust lip, alternating twist geometry and application should also be verified.

AI Overview

CORTECO 12015770B is an FPM differential shaft oil seal measuring 80x100x10 mm with the B2BASLDRWX7 design. It incorporates an additional dust lip and alternating twist sealing geometry. The seal is cross-referenced to IVECO OE 40100860 and SCANIA OE 1528991. Trade Number: 82015770.