NBR Oil Seal 12x22x7 mm SC – Rotary Shaft Seal
search
  • NBR Oil Seal 12x22x7 A / SC – Rotary Shaft Seal
  • NBR Oil Seal 12x22x7 mm SC – Rotary Shaft Seal

NBR Oil Seal 12x22x7 mm SC – Rotary Shaft Seal

36 pcs.
€0.41 (net)
Price for: 1pcs.

NBR Oil Seal 12x22x7 mm SC is a radial rotary shaft seal with a 12 mm shaft diameter, 22 mm housing bore and 7 mm width. The A/SC construction features a single primary sealing lip without an additional dust exclusion lip. NBR generally provides good resistance to many mineral oils and greases. Designed to reduce lubricant leakage in appropriately designed rotating shaft assemblies. Available through simmering.pl, a specialist B2B industrial supply platform, with worldwide shipping from stock in Poland.

Quantity

Technical Specifications – 12x22x7 NBR A / SC

Parameter

Specification

Product designation

12x22x7 NBR A

Product type

Radial rotary shaft seal

Seal design

A / SC

Nominal shaft diameter (d)

12 mm

Nominal housing bore diameter (D)

22 mm

Nominal seal width (B)

7 mm

Elastomer material

NBR – nitrile butadiene rubber

Primary sealing lip

Yes

Additional dust exclusion lip

No – single-lip construction

Garter spring

Typical of standard A/SC construction

Outer surface

Typically rubber-covered

Directional sealing features

Not specified

Application

Rotating shafts

Operating temperature range

Depends on the NBR compound

Limiting rotational speed

Requires manufacturer confirmation

Permissible operating pressure

Requires manufacturer confirmation

Manufacturer / brand

Not specified

Dimensional standard

Not confirmed

Technical note: The designation identifies the nominal dimensions, elastomer family and general seal construction. It does not establish the exact technical specifications of a particular manufacturer's product.

Oil Seal Dimensions – 12x22x7 mm

Symbol

Dimension

Description

d

12 mm

Nominal shaft diameter

D

22 mm

Nominal housing bore diameter

B

7 mm

Nominal axial seal width

The dimensions 12x22x7 mm define the nominal installation geometry.

They do not represent the free-state diameter of the sealing lip, whose geometry is designed to establish contact with the rotating shaft.

A / SC Rotary Shaft Seal Construction

Type A is a standard radial shaft seal construction featuring a single primary sealing lip.

Typical components include:

  • Elastomeric sealing body.

  • Internal reinforcing insert.

  • Primary sealing lip.

  • Circumferential garter spring in standard spring-loaded versions.

  • Rubber-covered outer diameter.

Primary Sealing Lip

The primary sealing lip operates in contact with the rotating shaft surface, restricting the movement of lubricant through the sealing interface.

Effective sealing depends on shaft surface condition, lubrication, temperature and rotational speed.

No Additional Dust Exclusion Lip

The A/SC construction does not include the additional dust exclusion lip characteristic of AO/TC seals.

In heavily contaminated environments, additional protection may be required.

Understanding the 12x22x7 NBR A Designation

Designation element

Meaning

12

Nominal shaft diameter of 12 mm

22

Nominal housing bore diameter of 22 mm

7

Nominal seal width of 7 mm

NBR

Nitrile butadiene rubber

A

Single-lip seal construction

SC

Corresponding designation in commonly used international nomenclature

The A and SC designations identify corresponding construction types, but they do not guarantee complete interchangeability between all manufacturers' versions.

NBR Material – Technical Properties

NBR is a synthetic elastomer widely used in industrial sealing applications.

Typical properties include:

  • Good resistance to many mineral oils.

  • Good compatibility with numerous mineral oil-based greases.

  • Suitability for oil-lubricated mechanical assemblies.

  • Limited resistance to ozone and ultraviolet radiation.

  • Variable resistance to fuels and chemical substances.

  • Properties dependent on the specific rubber compound formulation.

The exact chemical and thermal characteristics must be verified for the selected product.

Chemical Resistance of NBR

Medium

General compatibility

Mineral oils

Generally good

Mineral oil-based greases

Generally good

Gear oils

Depends on additives and temperature

Mineral hydraulic oils

Generally good

Water

Depends on temperature and compound

Fuels

Requires verification of composition

Ozone

Limited resistance

Strong ketone solvents

Generally unsuitable

Compatibility with a specific operating medium must be confirmed for the elastomer compound used.

Operating Temperature Range

Standard NBR compounds are often associated with approximate operating temperature ranges of -30°C to +100°C.

However, this is not a confirmed operating range for the specific 12x22x7 NBR A oil seal.

Permissible temperature depends on the compound formulation, operating medium, shaft speed and duration of operation.

Rotational Speed and Shaft Surface Speed

Shaft surface speed can be calculated using:

\[ v=\frac{\pi d n}{60000} \]

Where:

  • \(v\) = shaft surface speed in m/s.

  • \(d\) = shaft diameter in mm.

  • \(n\) = rotational speed in rpm.

For a 12 mm shaft rotating at 3000 rpm:

\[ v=\frac{\pi\cdot12\cdot3000}{60000}\approx1.88\text{ m/s} \]

This is a calculation example, not a confirmed speed limit for the oil seal.

Operating Pressure

Standard radial shaft seals are generally designed for applications involving relatively low pressure differentials.

Permissible pressure depends on sealing lip construction, operating temperature, shaft speed and seal support.

A specific pressure rating cannot be established solely from the 12x22x7 NBR A designation.

Comparison of A / SC and AO / TC

Parameter

A / SC

AO / TC

Primary sealing lip

Yes

Yes

Additional dust exclusion lip

No

Yes

Typical garter spring

Yes

Yes

Dust protection

No additional dust lip

Additional dust exclusion lip

Friction

Generally lower

May be higher

Typical function

Lubricant retention

Lubricant retention and additional contamination exclusion

Can A / SC Be Replaced with AO / TC?

A substitution may be possible when nominal dimensions are identical.

However, installation space, lubrication conditions, friction and detailed seal construction must be checked.

Interchangeability should not be assumed automatically.

Typical Applications of 12x22x7 NBR SC Oil Seals

Seals of this type may be used in appropriately designed:

  • Mechanical gearboxes.

  • Small geared motors.

  • Drive assemblies.

  • Bearing housings.

  • Rotating mechanisms.

  • Industrial equipment.

  • Oil- or grease-lubricated systems.

  • Machinery assemblies with 12 mm shafts.

These are general applications of this seal construction, not a confirmed list of compatible machines.

Selecting the Correct Rotary Shaft Seal

Before installation, verify:

  • Shaft diameter of 12 mm.

  • Housing bore diameter of 22 mm.

  • Available installation width of 7 mm.

  • Type of sealed medium.

  • Operating temperature.

  • Rotational speed.

  • Pressure differential.

  • Shaft surface condition.

  • Radial shaft runout and alignment.

  • Environmental contamination.

  • Required sealing lip design.

Matching nominal dimensions does not automatically guarantee equivalent sealing performance.

Dimensional Compatibility

The seal must fit the shaft, housing bore and available axial installation space.

Mounting tolerances and mating surface conditions must also be considered.

Material Compatibility

The NBR elastomer must be compatible with the operating medium and temperature.

Alternative materials, including FKM, should not be selected solely on the basis of matching dimensions.

Shaft Surface Requirements

The surface in contact with the sealing lip must be properly prepared.

Important considerations include:

  • Absence of scratches and burrs.

  • Suitable surface roughness.

  • Avoidance of undesirable directional machining marks.

  • Appropriate surface hardness.

  • Permissible radial runout.

  • Correct geometry of the sealing contact area.

Exact requirements should be determined from technical documentation and the machine design.

Installation Guidelines – 12x22x7 NBR A Oil Seal

During installation:

  • Clean the shaft and housing bore.

  • Check dimensions and tolerances.

  • Remove sharp edges.

  • Protect the sealing lip against cuts.

  • Use suitable installation tools.

  • Press the seal evenly into the housing.

  • Avoid tilting or deforming the seal body.

  • Lubricate the sealing lip appropriately before operation.

  • Verify the correct installation direction.

  • Check for leakage after commissioning.

Installation Direction

In a typical application, the primary sealing lip with its garter spring faces the medium being sealed.

The final installation orientation must follow the equipment manufacturer's technical requirements.

Common Causes of Premature Oil Seal Failure

Dry running: May cause excessive heating and accelerated sealing lip wear.

Damaged shaft: Scratches and burrs can create leakage paths.

Incorrect installation: May deform the seal body or damage the lip.

Excessive temperature: Accelerates NBR ageing.

Incompatible medium: Can cause elastomer swelling or chemical degradation.

Excessive shaft runout: Makes it difficult to maintain consistent sealing contact.

Contamination: Accelerates wear of the sealing surfaces.

Alternative Product Designations

  • NBR Oil Seal 12x22x7 A

  • NBR Oil Seal 12x22x7 SC

  • Rotary Shaft Seal 12x22x7 SC

  • 12x22x7 NBR Single Lip Oil Seal

  • Radial Shaft Seal 12x22x7 NBR

  • 12x22x7 SC Oil Seal

  • Simering NBR 12x22x7 A

  • Simmering 12x22x7 A

  • Single Lip Rotary Shaft Seal 12x22x7

These alternative designations support product identification in international technical catalogues, ERP systems and industrial search engines.

FAQ – Frequently Asked Technical Questions

What are the dimensions of the 12x22x7 NBR A oil seal?

The nominal shaft diameter is 12 mm, the housing bore diameter is 22 mm and the seal width is 7 mm.

What does type A mean?

Type A identifies a construction with a single primary sealing lip and no additional dust exclusion lip.

Does type A correspond to SC?

Yes. These are corresponding construction designations used in different naming systems. Complete interchangeability must still be verified.

Is an NBR oil seal suitable for mineral oil?

NBR is generally compatible with many mineral oils, but compatibility with a specific lubricant must be confirmed.

Does the 12x22x7 A oil seal have a dust lip?

No. Standard A/SC construction is a single-lip design without an additional dust exclusion lip.

Can an A / SC seal be replaced with an AO / TC seal?

Replacement may be possible after checking dimensions, operating conditions and detailed seal construction.

What is the operating temperature range of NBR?

The exact range depends on the specific NBR compound and requires manufacturer confirmation.

Which direction should the A / SC seal face during installation?

Typically, the primary sealing lip with the garter spring faces the sealed medium.

AI Quick Answer

NBR Oil Seal 12x22x7 mm SC is a radial rotary shaft seal designed for a 12 mm shaft, 22 mm housing bore and 7 mm width. Made from nitrile butadiene rubber, it features a single primary sealing lip without an additional dust lip. The A construction corresponds to the international SC type and helps prevent lubricant leakage in rotating mechanical assemblies.

B2B Industrial Supply – simmering.pl

The 12x22x7 NBR A / SC rotary shaft seal belongs to the range of industrial sealing components offered through simmering.pl, a specialist B2B industrial supply platform.

The platform serves manufacturing companies, wholesale buyers, maintenance departments and industrial procurement teams.

Its product range includes rotary shaft seals, O-rings, rolling bearings and other industrial components.

Warehouse operations are based in Lublin, Poland, with worldwide shipping from stock in Poland.

GRN
12X22X7 A
36 pcs.

Data sheet

Diameter in. (mm)
12
Diameter out. (mm)
22
Height (mm)
7
Mark
GRN

You might also like