FAG 32013-X 65x100x23 mm single-row tapered roller bearing from Schaeffler, belonging to the 320 series. Inside diameter 65 mm, outside diameter 100 mm and overall width 23 mm. Open, separable construction designed for radial and unidirectional axial loads. The X suffix identifies a modified internal design variant. Allows clearance or preload adjustment within a suitable bearing arrangement. Specialist B2B industrial trading platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Manufacturer |
FAG / Schaeffler |
|
Commercial designation |
32013 X FAG |
|
FAG catalogue designation |
32013-X |
|
Bearing type |
Tapered roller bearing |
|
Construction |
Single-row |
|
Series |
320 |
|
Inside diameter (d) |
65 mm |
|
Outside diameter (D) |
100 mm |
|
Overall width (T) |
23 mm |
|
Inner ring width (B) |
23 mm |
|
Outer ring width (C) |
17.5 mm |
|
Rolling elements |
Tapered rollers |
|
Design |
Separable |
|
Radial load capacity |
Yes |
|
Axial load direction |
Unidirectional |
|
Sealing arrangement |
Open construction |
|
Nominal dimensions |
65x100x23 mm |
The basic dynamic load rating C, basic static load rating C0, fatigue load limit Pu, permissible rotational speeds and weight should be obtained from current Schaeffler technical documentation for the exact FAG 32013-X designation.
|
Designation element |
Technical meaning |
|---|---|
|
3 |
Tapered roller bearing family |
|
320 |
Tapered roller bearing dimensional series |
|
13 |
Bore code corresponding to 65 mm |
|
X |
Design variant associated with modified internal geometry |
|
FAG |
Bearing brand of the Schaeffler Group |
In the standard bearing designation system, bore code 13 corresponds to a nominal bore diameter of 65 mm.
For bore codes from 04 upwards, the nominal bore diameter is calculated by multiplying the code by 5.
13 x 5 = 65 mm.
The 320 series includes single-row tapered roller bearings with defined proportions between bore diameter, outside diameter and overall width.
For the FAG 32013-X, the nominal dimensions are 65x100x23 mm.
In FAG nomenclature, the suffix X is associated with a modified internal design of the tapered roller bearing.
The suffix does not indicate integrated seals, increased C3 internal clearance or a special cage material.
When selecting a replacement bearing, the complete designation 32013-X should be retained because different internal design variants may have different technical characteristics despite identical mounting dimensions.
The inner ring has a nominal bore diameter of 65 mm and a width of 23 mm.
Tapered rollers operate on its conical raceway, transmitting loads between the bearing rings.
The inner ring, rollers and cage form an assembly commonly referred to as the cone assembly.
The outer ring has an outside diameter of 100 mm and a width of 17.5 mm.
Its separable construction allows it to be installed independently of the inner ring assembly.
Correct seating of the outer ring in the housing influences alignment, load distribution and the service life of the complete bearing arrangement.
The rolling elements have a tapered geometry, with their axes positioned at an appropriate angle to the bearing's rotational axis.
Unlike ball bearings, which have idealised point contact, tapered roller bearings use line contact between the rolling elements and raceways.
This construction enables the bearing to accommodate combined radial and axial loads.
The cage maintains appropriate spacing between the tapered rollers and supports their guidance during operation.
The exact cage material and construction should be identified using FAG technical documentation for the 32013-X version.
The bearing consists of two main components:
The inner ring assembly with tapered rollers and cage.
A separate outer ring.
The separable design facilitates installation and removal. However, it does not mean that bearing rings from different manufacturers or construction variants can be combined indiscriminately.
FAG 32013-X is designed to accommodate loads acting perpendicular to the shaft axis.
Line contact between the tapered rollers and raceways enables the bearing to support substantial loads relative to its dimensions.
The actual permissible load depends on the manufacturer's catalogue ratings, rotational speed, lubrication and operating conditions.
A single-row tapered roller bearing accommodates axial loads in one direction.
In assemblies requiring axial shaft location in both directions, two tapered roller bearings are frequently arranged in opposition.
When a tapered roller bearing is subjected to radial loading, an internal axial force component is also generated.
Consequently, bearing arrangement calculations must consider both externally applied forces and the internal forces resulting from bearing geometry.
In tapered roller bearings, the final operating clearance depends on the installation and adjustment of the complete bearing assembly.
It may be adjusted using nuts, spacer rings or other mechanisms incorporated into the equipment design.
Excessive clearance can cause increased shaft displacement, vibration and reduced guidance accuracy.
Appropriate preload may be applied in tapered roller bearing arrangements to increase rigidity and limit unwanted displacement.
Excessive preload increases friction, operating temperature and the risk of premature raceway damage.
The required adjustment must be established from the technical documentation of the specific equipment.
FAG 32013-X features a standard open construction without integrated contact seals.
It requires suitable lubrication and protection against contamination provided by the surrounding mechanical assembly.
In gearboxes and power transmission mechanisms, tapered roller bearings frequently operate with oil lubrication.
It is important to ensure adequate oil supply to the contact areas between the rolling elements and raceways.
Grease lubrication is possible in certain applications.
Grease selection should consider rotational speed, load, operating temperature and sealing conditions.
Permissible operating parameters depend on bearing construction, lubrication, mounting fits and heat dissipation.
Engineering calculations should use manufacturer data specifically applicable to FAG 32013-X.
The original FAG catalogue designation should be preserved as 32013-X.
The following variations may also appear in technical searches:
FAG 32013-X
32013-X FAG
32013 X FAG
FAG 32013 X 65x100x23
FAG 32013-X tapered roller bearing
32013-X 65x100x23 mm
Single-row tapered roller bearing 65x100x23
|
Manufacturer |
Designation |
Dimensions |
|---|---|---|
|
FAG |
32013-X |
65x100x23 mm |
|
SKF |
32013 X/Q |
65x100x23 mm |
|
NSK |
HR32013XJ |
65x100x23 mm |
|
NTN |
4T-32013X |
65x100x23 mm |
|
KOYO |
32013JR |
65x100x23 mm |
|
TIMKEN |
32013X |
65x100x23 mm |
The listed bearings belong to the same nominal dimensional family. However, dimensional compatibility alone does not confirm complete technical interchangeability.
Before selecting an alternative, compare basic dynamic and static load ratings, tolerances, internal geometry, cage construction and mounting requirements.
|
Designation |
Inside diameter |
Outside diameter |
Overall width |
|---|---|---|---|
|
32011-X |
55 mm |
90 mm |
23 mm |
|
32012-X |
60 mm |
95 mm |
23 mm |
|
32013-X |
65 mm |
100 mm |
23 mm |
|
32014-X |
70 mm |
110 mm |
25 mm |
|
32015-X |
75 mm |
115 mm |
25 mm |
All the listed sizes belong to the single-row tapered roller bearing family, but their mounting dimensions differ.
Changing the bearing size requires corresponding modifications to the shaft, housing and axial locating components.
|
Feature |
FAG 32013-X |
Deep groove ball bearing |
|---|---|---|
|
Rolling elements |
Tapered rollers |
Balls |
|
Raceway contact |
Line contact |
Idealised point contact |
|
Radial loads |
Yes |
Yes |
|
Axial loads |
In one direction |
In both directions, within design limits |
|
Construction |
Separable |
Usually non-separable |
|
Axial clearance adjustment |
Possible in a suitable bearing arrangement |
Depends on assembly design |
|
Typical application |
Combined-load bearing arrangements |
General-purpose rotating assemblies |
Due to their construction differences, a tapered roller bearing should not be replaced with a deep groove ball bearing solely because their dimensions are similar.
Before purchasing or installing the bearing, verify:
Complete FAG catalogue designation 32013-X.
Shaft diameter of 65 mm.
Housing bore diameter of 100 mm.
Overall width of 23 mm.
Inner ring width B = 23 mm and outer ring width C = 17.5 mm.
Required basic dynamic load rating C and basic static load rating C0.
Direction and magnitude of radial and axial loads.
Required axial clearance or preload.
Permissible rotational speed.
Lubrication method and heat dissipation conditions.
Precision, mounting fits and cage requirements.
Preserving the complete designation 32013-X is particularly important because the X suffix identifies a specific FAG internal design variant.
Single-row tapered roller bearings from the 320 series are used in assemblies requiring combined radial and axial load capacity with appropriate bearing arrangement rigidity.
Typical applications for this construction include:
Mechanical gearboxes and industrial reduction units.
Power transmission systems.
Differential mechanisms.
Axle assemblies and wheel hubs.
Agricultural machinery.
Construction equipment.
Industrial drive shafts.
Mechanisms requiring axial clearance adjustment.
These are applications characteristic of tapered roller bearings. Compatibility of the specific FAG 32013-X with a particular machine must be confirmed using the equipment manufacturer's technical documentation.
Before installation, inspect the dimensions and condition of the shaft and housing mounting surfaces.
All surfaces should be clean and free from corrosion, burrs and mechanical damage.
The separable construction allows the outer ring and inner ring assembly with tapered rollers to be installed independently.
Mounting force must be applied directly to the ring being installed with an interference fit.
Installation force must not be transmitted through the rolling elements because this can damage the raceways.
After installation, adjust axial clearance or preload according to the design requirements of the complete assembly.
Incorrect adjustment may cause excessive heating, vibration, noise and accelerated wear.
Suitable bearing lubrication must be provided before the equipment is operated.
Until installation, the bearing should be stored in a clean, dry environment, preferably in its original packaging, protected against moisture and contamination.
The bearing has an inside diameter of 65 mm, outside diameter of 100 mm and overall width of 23 mm. The outer ring width is 17.5 mm.
The X suffix identifies a construction variant associated with modified internal geometry in FAG tapered roller bearings. It does not indicate integrated seals or increased C3 internal clearance.
Yes. The outer ring can be separated from the inner ring assembly containing the tapered rollers and cage.
The bearing accommodates radial loads and axial loads acting in one direction. Oppositely arranged bearing pairs are frequently used when axial shaft location is required in both directions.
No. It is an open tapered roller bearing. Protection against contamination depends on the surrounding assembly.
Yes. Axial clearance or preload can be adjusted within an appropriately designed bearing arrangement.
Both bearings have nominal dimensions of 65x100x23 mm. Before substitution, load ratings, tolerances, construction and operating requirements must be compared.
Single-row tapered roller bearings are commonly used in gearboxes subjected to combined loads. Selecting the specific bearing requires consideration of operating loads, rotational speeds and lubrication conditions.
FAG 32013-X is a single-row tapered roller bearing from Schaeffler with dimensions of 65x100x23 mm. It belongs to the 320 series and features a separable construction. The bearing accommodates radial loads and axial loads in one direction. The X suffix identifies a FAG internal design variant. Axial clearance or preload can be adjusted within a suitable bearing arrangement.
The specialist B2B industrial trading platform simmering.pl supplies FAG bearings for industrial, technical and maintenance applications, supporting component selection based on complete catalogue designations, dimensions and operating requirements, with worldwide shipping from stock in Poland.
Data sheet
You might also like