TIMKEN 32013X 65x100x23 mm single-row TS tapered roller bearing. Inside diameter 65 mm, outside diameter 100 mm and overall width 23 mm. Open, separable construction for radial and unidirectional axial loads. Dynamic radial load rating C1: 116 kN (1 million revolutions); static radial load rating C0: 137 kN. ISO 355 designation 4CC. Typical applications include gearboxes, power transmission systems and industrial machinery. Specialist B2B industrial trading platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Manufacturer |
TIMKEN |
|
Commercial designation |
32013 X TIMKEN |
|
Catalogue designation |
32013X |
|
Bearing type |
Tapered roller bearing |
|
TIMKEN design |
TS - Tapered Single |
|
Number of rows |
1 |
|
Dimensional series |
32013X |
|
ISO 355 dimensional designation |
4CC |
|
Inside diameter (d) |
65 mm |
|
Outside diameter (D) |
100 mm |
|
Overall width (T) |
23 mm |
|
Inner ring width (B) |
23 mm |
|
Outer ring width (C) |
17.5 mm |
|
Rolling elements |
Tapered rollers |
|
Construction |
Separable |
|
Load types |
Radial and axial |
|
Axial load direction |
Unidirectional |
|
Sealing arrangement |
Open construction |
|
Parameter |
Value |
|---|---|
|
Dynamic radial load rating C1 - 1 million revolutions |
116 kN |
|
Dynamic radial load rating C90 - 90 million revolutions |
30.1 kN |
|
Static radial load rating C0 |
137 kN |
|
Factor e |
0.46 |
|
Factor K |
1.27 |
|
Factor Y |
1.31 |
The C1 and C90 values refer to different bearing life calculation bases used by TIMKEN. They must not be compared directly or substituted for one another without applying the appropriate calculation method.
|
Element |
Meaning |
|---|---|
|
3 |
Tapered roller bearing family |
|
320 |
Dimensional series |
|
13 |
Bore code corresponding to 65 mm |
|
X |
Element identifying a specific bearing design variant |
|
TIMKEN |
Bearing manufacturer |
Bore code 13 corresponds to a nominal inside diameter of 65 mm.
13 x 5 = 65 mm.
In the TIMKEN catalogue, the complete designation 32013X identifies a specific tapered roller bearing variant.
The letter X does not indicate an integrated seal or C3 internal clearance. The complete manufacturer designation should be preserved when ordering or comparing bearings.
TIMKEN classifies 32013X as a single-row tapered roller bearing of TS design.
This construction consists of two separable components: an inner ring assembly with tapered rollers and cage, and a separate outer ring.
The inner ring has a bore diameter of 65 mm and a width of 23 mm.
Its tapered raceway operates with the rolling elements to transmit loads. TIMKEN refers to the inner ring, rollers and cage assembly as the cone assembly.
The outer ring has an outside diameter of 100 mm and a width of 17.5 mm.
In TIMKEN terminology, it is referred to as the cup. It can be installed independently of the inner ring assembly.
The following component designations are associated with the TIMKEN 32013X bearing family:
|
Component |
Designation |
|---|---|
|
Inner ring assembly |
X32013X |
|
Outer ring |
Y32013X |
Individual component designations should not be confused with the complete bearing designation. When ordering, verify whether the product includes the complete cone and cup assembly.
The rolling elements have a tapered geometry and operate between appropriately inclined raceways.
This geometry enables the bearing to accommodate radial and axial loads.
Line contact between the rollers and raceways distinguishes tapered roller bearings from ball bearings, which feature idealised point contact.
The cage maintains appropriate spacing between the tapered rollers and guides them during operation.
The exact cage material and construction should be identified using technical documentation for the specific bearing version.
TIMKEN 32013X is designed to accommodate forces acting perpendicular to the shaft axis.
According to the TIMKEN catalogue values, the dynamic radial load rating C1 is 116 kN, while the static radial load rating C0 is 137 kN.
These values are inputs for bearing selection calculations and should not be interpreted as unconditional permissible operating loads for every machine.
A single-row tapered roller bearing accommodates axial loads in one direction.
When a shaft requires axial location in both directions, two tapered roller bearings are frequently arranged in opposition.
Radial loading in a tapered roller bearing also generates an internal axial force component.
When designing the bearing arrangement, this force and the interaction between bearings in an opposed pair must be considered.
TIMKEN specifies the following factors for 32013X:
e = 0.46
K = 1.27
Y = 1.31
These factors are used in the manufacturer's calculation methods, including combined-load analysis. They must be applied according to the relevant TIMKEN catalogue formulas.
In separable tapered roller bearings, the final operating clearance depends on the adjustment of the complete bearing assembly.
Adjustment may be achieved through appropriate ring positioning, adjusting nuts or spacer components.
Excessive clearance can increase shaft displacement and reduce guidance accuracy.
In suitable arrangements, preload may be applied to increase bearing rigidity.
However, excessive preload increases friction and operating temperature, potentially accelerating damage to the rolling elements and raceways.
The required clearance or preload should be established using the equipment manufacturer's technical documentation.
TIMKEN 32013X has an open construction and requires lubrication supplied by the surrounding mechanical assembly.
Protection against dust, moisture and other contaminants depends on the sealing arrangement of the complete assembly.
In gearboxes and power transmission mechanisms, tapered roller bearings frequently operate with oil lubrication.
Adequate lubricant supply to the contact areas between the tapered rollers and raceways must be ensured.
Grease lubrication is possible under suitable operating conditions.
Lubricant selection should consider load, rotational speed, temperature and assembly construction.
Permissible operating speed depends on lubrication, load, clearance or preload adjustment, and heat dissipation conditions.
The limiting rotational speed should not be determined solely from the nominal dimensions of 65x100x23 mm.
Common designation variations include:
TIMKEN 32013X
32013X TIMKEN
32013 X TIMKEN
TIMKEN 32013X 65x100x23
TIMKEN 32013X tapered roller bearing
32013X single-row tapered roller bearing
65x100x23 tapered roller bearing
|
Manufacturer |
Designation |
Dimensions |
|---|---|---|
|
TIMKEN |
32013X |
65x100x23 mm |
|
FAG |
32013-X |
65x100x23 mm |
|
SKF |
32013 X/Q |
65x100x23 mm |
|
NSK |
HR32013XJ |
65x100x23 mm |
|
NTN |
4T-32013X |
65x100x23 mm |
|
KOYO |
32013JR |
65x100x23 mm |
This table identifies dimensional equivalents, not confirmed replacements with identical technical specifications.
Before selecting a bearing from another manufacturer, compare load ratings, tolerances, internal geometry, cage construction and mounting requirements.
|
TIMKEN designation |
Dimensions |
ISO 355 designation |
|---|---|---|
|
32013X |
65x100x23 mm |
4CC |
|
33013 |
65x100x27 mm |
2CE |
|
30213 |
65x120x24.75 mm |
3EB |
|
32213 |
65x120x32.75 mm |
3EC |
|
33213 |
65x120x41 mm |
3EE |
These bearings share a nominal bore diameter of 65 mm but differ in outside diameter, overall width and construction.
They are not directly interchangeable without checking mounting dimensions and operating requirements.
Both bearings have an inside diameter of 65 mm and an outside diameter of 100 mm.
However, their overall widths differ:
32013X - 23 mm.
33013 - 27 mm.
The 4 mm difference affects axial positioning, spacer dimensions and available mounting space.
One bearing should not replace the other without evaluating the complete assembly design.
Before installation, verify:
Complete designation 32013X.
Shaft diameter of 65 mm.
Housing bore diameter of 100 mm.
Overall width of 23 mm.
Inner ring width of 23 mm.
Outer ring width of 17.5 mm.
Required dynamic and static load ratings.
Direction and magnitude of axial loads.
Required clearance or preload.
Lubrication method and operating conditions.
Permissible rotational speed.
Mounting fits and axial shoulder dimensions.
Matching nominal dimensions do not guarantee complete technical interchangeability.
Single-row TS tapered roller bearings are used in assemblies subjected to combined radial and axial loading.
Typical applications for this bearing construction include:
Industrial gearboxes.
Reduction units and power transmission mechanisms.
Differential mechanisms.
Axle assemblies.
Wheel hubs.
Agricultural machinery.
Construction equipment.
Industrial drive shafts.
These are applications characteristic of this bearing type, not a confirmed list of machines equipped with the specific TIMKEN 32013X bearing.
Before installation, inspect the shaft, housing and axial locating surfaces.
Contamination, burrs and mechanical damage can affect correct bearing seating.
The outer ring and inner ring assembly can be installed separately.
Mounting force should be applied to the ring being installed with an interference fit, avoiding transmission of force through the tapered rollers.
After installation, the appropriate axial clearance or preload must be established.
Incorrect adjustment can lead to overheating, increased friction, vibration and premature wear.
During operation, bearing temperature, noise, vibration and lubrication condition should be monitored.
An unusual temperature increase may indicate incorrect clearance, excessive preload or inadequate lubrication.
The inside diameter is 65 mm, outside diameter is 100 mm and overall width is 23 mm. The outer ring width is 17.5 mm.
Yes. It is a single-row tapered roller bearing of TS design, featuring a separable construction.
TIMKEN specifies a dynamic radial load rating C1 of 116 kN based on a bearing life of 1 million revolutions. For the 90-million-revolution basis, the manufacturer specifies C90 = 30.1 kN.
The catalogue static radial load rating C0 is 137 kN.
Yes, in one direction. Two oppositely arranged tapered roller bearings are frequently used when axial shaft location is required in both directions.
No. It is an open bearing requiring appropriate lubrication and protection against contamination.
Both bearings have nominal dimensions of 65x100x23 mm. However, their load ratings, tolerances, construction and operating requirements must be compared before substitution.
They are not directly interchangeable dimensionally. Both have an inside diameter of 65 mm and outside diameter of 100 mm, but 32013X has an overall width of 23 mm, while 33013 measures 27 mm.
TIMKEN 32013X is a single-row TS tapered roller bearing measuring 65x100x23 mm. It features a separable construction and accommodates radial loads and axial loads in one direction. The manufacturer specifies a dynamic radial load rating C1 of 116 kN and a static radial load rating C0 of 137 kN. Proper lubrication and bearing arrangement adjustment are essential.
The specialist B2B industrial trading platform simmering.pl supplies TIMKEN tapered roller bearings for industrial and maintenance applications, supporting component selection based on complete catalogue designations, dimensions and technical specifications, with worldwide shipping from stock in Poland.
Data sheet
You might also like