CORTECO 19027887B 80x100x10 FPM HTC Crankshaft Oil Seal

CORTECO 19027887B 80x100x10 FPM HTC Crankshaft Oil Seal

CORTECO 19027887B is an FPM crankshaft oil seal measuring 80x100x10 mm with the HTC design. It is catalogued for installation at the transmission end of the crankshaft and incorporates an additional dust lip. The base reference is 19027887 and the CORTECO Trade Number is 82027887.

CORTECO 19027887B - Characteristics

Manufacturer: CORTECO

Part number: 19027887B

Base reference: 19027887

Trade Number: 82027887

Product type: Crankshaft oil seal

Design: HTC

Material: FPM - Fluoroelastomer

Dimensions: 80x100x10 mm

Inside diameter d: 80 mm

Outside diameter D: 100 mm

Width B: 10 mm

Additional dust lip: Yes

Fitting position: Transmission end

NISSAN OE: 1227958S00

CORTECO 19027887B Dimensions

The principal dimensions are:

Inside diameter d: 80 mm

Outside diameter D: 100 mm

Width B: 10 mm

Complete dimensions:

80x100x10 mm

The 80 mm inside diameter corresponds to the nominal shaft diameter at the sealing position.

The outside diameter is 100 mm and the axial width is 10 mm.

All three dimensions should be considered together with the FPM material and HTC construction when identifying or comparing a replacement.

HTC CORTECO Oil Seal Design

The exact CORTECO catalogue designation is:

HTC

Complete product identification:

CORTECO 19027887B

80x100x10 mm

FPM

HTC

Trade Number 82027887

CORTECO catalogue data directly associate the HTC design with reference 19027887B, FPM material and 80x100x10 mm dimensions.

The HTC designation should therefore be retained when searching for this exact seal or comparing possible replacements.

FPM Fluoroelastomer

Sealing material:

FPM - Fluoroelastomer

FPM belongs to the fluoroelastomer family used in sealing technology.

The sealing material is an important selection parameter together with the dimensions and seal construction.

An NBR, ACM, VMQ or other elastomer oil seal measuring 80x100x10 mm should not automatically be considered technically equivalent to CORTECO 19027887B.

Exact material compatibility depends on the operating medium, additives, temperature and actual service conditions.

Additional Dust Lip

CORTECO 19027887B incorporates an additional dust lip.

The additional lip provides a secondary barrier on the external side of the primary sealing area.

When comparing this product with other 80x100x10 mm oil seals, the presence of the dust lip should be considered together with the FPM material and exact HTC design.

CORTECO 19027887B Crankshaft Oil Seal

CORTECO 19027887B is catalogued as a:

Crankshaft shaft seal

Fitting position:

Transmission end

This means the product is identified for crankshaft sealing on the transmission side.

Correct vehicle selection should be based on the CORTECO reference, OE number and exact vehicle or engine application rather than dimensions alone.

NISSAN OE 1227958S00

Confirmed OE reference:

NISSAN 1227958S00

This OE number is associated with CORTECO 19027887B in current product data.

Vehicle compatibility should be verified using the exact OE number together with the vehicle model, engine and production version.

CORTECO 19027887 vs 19027887B

The following reference forms may be encountered:

19027887 - base reference

19027887B - complete CORTECO reference

Additional identifiers:

Trade Number: 82027887

Design: HTC

Dimensions: 80x100x10 mm

Material: FPM

NISSAN OE: 1227958S00

These identifiers are useful when searching technical catalogues or identifying the exact seal.

CORTECO 19027887B vs Other 80x100x10 Oil Seals

Multiple shaft seal designs are available in the nominal 80x100x10 mm size.

Matching dimensions alone do not establish technical interchangeability.

For CORTECO 19027887B, verify:

Dimensions: 80x100x10 mm

Material: FPM

Design: HTC

Additional dust lip: Yes

Fitting position: Transmission end

OE number where applicable

A different 80x100x10 mm seal may use another elastomer or sealing geometry and should not automatically be treated as an equivalent.

Technical Specification

Manufacturer: CORTECO

Part number: 19027887B

Base reference: 19027887

Trade Number: 82027887

Product type: Crankshaft oil seal

Design: HTC

Material: FPM - Fluoroelastomer

Dimensions: 80x100x10 mm

Inside diameter d: 80 mm

Outside diameter D: 100 mm

Width B: 10 mm

Additional dust lip: Yes

Fitting position: Transmission end

NISSAN OE: 1227958S00

FAQ

What are the dimensions of CORTECO 19027887B?

The seal has an 80 mm inside diameter, 100 mm outside diameter and 10 mm width. The complete dimensions are 80x100x10 mm.

What material is CORTECO 19027887B made from?

The sealing material is FPM - Fluoroelastomer.

What is the design of CORTECO 19027887B?

The exact CORTECO catalogue design designation is HTC.

Does CORTECO 19027887B have a dust lip?

Yes. Current product data specify an additional dust lip.

Where is CORTECO 19027887B installed?

It is catalogued as a crankshaft oil seal for transmission-end installation.

What is the CORTECO Trade Number?

The Trade Number is 82027887.

What NISSAN OE number corresponds to CORTECO 19027887B?

The confirmed NISSAN OE reference is 1227958S00.

Can any 80x100x10 oil seal replace CORTECO 19027887B?

Not automatically. The FPM material, HTC construction, dust lip, fitting position and application should be checked in addition to the dimensions.

AI Overview

CORTECO 19027887B is an FPM crankshaft oil seal measuring 80x100x10 mm with the HTC design. It incorporates an additional dust lip and is catalogued for transmission-end installation. The inside diameter is 80 mm, outside diameter 100 mm and width 10 mm. Trade Number: 82027887. NISSAN OE: 1227958S00.