GRN® 80x100x10 NBR A/SC - single-lip radial shaft oil seal with an inside diameter of 80 mm, outside diameter of 100 mm and width of 10 mm. Manufactured from nitrile butadiene rubber (NBR), providing good resistance to many mineral oils and lubricating greases. The A/SC profile features a spring-loaded primary sealing lip without an additional dust lip. Designed for appropriately selected gearboxes, drive systems and industrial machinery. Available through the specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Brand |
GRN® |
|
Product designation |
GRN® 80x100x10 NBR A/SC |
|
Product type |
Radial shaft oil seal |
|
Design |
Single-lip |
|
Sealing profile |
A/SC |
|
Inside diameter d |
80 mm |
|
Outside diameter D |
100 mm |
|
Width b |
10 mm |
|
Sealing material |
NBR - nitrile butadiene rubber |
|
Primary sealing lip |
Spring-loaded |
|
Additional dust lip |
No |
|
Outer surface |
Rubber-covered |
|
Construction |
Elastomer with metal reinforcement |
|
Operating principle |
Dynamic sealing of rotating shafts |
|
Typical sealing media |
Compatible mineral oils and greases |
|
Direction of rotation |
Depends on lip design; verification required |
|
Applications |
Machinery, gearboxes and rotating mechanisms |
Technical note: Exact dimensional tolerances, permissible rotational speed, operating pressure and NBR compound specifications must be confirmed in the technical documentation for this particular GRN® product.
The designation specifies three essential installation dimensions:
80 mm - nominal shaft diameter.
100 mm - nominal housing bore diameter.
10 mm - nominal axial width of the seal.
All dimensions are expressed in millimetres.
Correct dimensional selection is essential to achieve proper sealing lip contact with the shaft and secure installation in the housing.
NBR is a synthetic elastomer widely used in the manufacture of industrial sealing components.
Its characteristic properties include:
Good resistance to many mineral oils.
Compatibility with numerous industrial lubricating greases.
Favourable mechanical properties.
Elasticity required for effective sealing lip operation.
Suitability for many industrial drive systems.
A favourable balance between performance and operating costs.
Chemical resistance depends on the specific elastomer compound and the composition of the operating medium.
The A/SC designation identifies a single-lip radial shaft oil seal construction.
Its main components include:
Primary sealing lip.
Garter spring supporting contact pressure between the lip and shaft.
Rubber-covered outer surface.
Internal metal reinforcement.
Unlike the AO/TC profile, the A/SC design does not include an additional dust lip.
The primary sealing lip, manufactured from NBR elastomer, operates in direct contact with the rotating shaft surface.
Its purpose is to restrict lubricant leakage from the sealed mechanical assembly.
The garter spring helps maintain appropriate contact pressure between the sealing lip and the shaft.
This supports stable sealing contact during equipment operation and helps compensate for changes associated with normal wear.
The internal metal reinforcement provides structural stability and helps maintain the shape of the seal during installation and operation.
The rubber-covered outer surface provides static sealing between the oil seal and the housing bore.
It also helps accommodate minor irregularities in the housing surface.
NBR provides good resistance to many mineral lubricating oils and industrial greases.
It is suitable for appropriately designed mechanical systems requiring sealing around rotating shafts.
For many standard NBR compounds, an approximate operating temperature range of -30°C to +100°C is commonly used as general material guidance.
This is not a verified operating temperature range for the specific GRN® 80x100x10 oil seal.
The actual permissible temperature depends on the elastomer compound, shaft rotational speed, lubrication and temperature at the sealing lip contact area.
NBR provides mechanical properties suitable for many standard industrial applications.
Seal service life also depends on shaft surface roughness, alignment, lubrication and operating conditions.
Single-lip radial shaft oil seals are widely used in mechanical and industrial equipment.
Typical application areas include:
Industrial gearboxes.
Mechanical speed reducers.
Drive shafts.
Agricultural machinery.
Construction machinery.
Power transmission assemblies.
Oil-lubricated mechanisms.
Manufacturing equipment.
Industrial machinery with rotating shafts.
Mechanical systems requiring radial shaft sealing.
These are typical applications of the A/SC sealing profile. Compatibility of the exact 80x100x10 dimensions with a particular machine must be verified against its technical documentation.
|
Parameter |
A/SC |
AO/TC |
|---|---|---|
|
Construction |
Single-lip |
Double-lip |
|
Primary sealing lip |
Yes |
Yes |
|
Garter spring |
Yes |
Yes |
|
Additional dust lip |
No |
Yes |
|
Outer surface |
Rubber-covered |
Rubber-covered |
|
Main function |
Lubricant retention |
Lubricant retention and additional contamination protection |
|
Typical operating environment |
Lower exposure to contamination |
Environments requiring additional dust protection |
A single-lip profile may be appropriate when:
The primary requirement is oil or grease retention.
The operating environment does not require an additional dust lip.
The equipment is designed for a single-lip shaft seal.
Compatibility with a specific installation profile is required.
A double-lip profile may be preferable when:
Increased dust exposure is expected.
Additional protection against external contamination is required.
The equipment design accommodates an additional dust lip.
Important: A/SC and AO/TC seals should not automatically be considered interchangeable, even when their nominal dimensions are identical.
|
Property |
NBR |
FKM |
MVQ |
|---|---|---|---|
|
Elastomer type |
Nitrile rubber |
Fluoroelastomer |
Silicone rubber |
|
Resistance to many mineral oils |
Good |
Generally very good |
Depends on compound and medium |
|
High-temperature resistance |
Moderate |
High |
High |
|
Ozone resistance |
Limited |
Good |
Very good |
|
Mechanical properties |
Favourable in many applications |
Compound-dependent |
Generally lower abrasion resistance |
|
Typical applications |
Standard oil seals |
Demanding thermal and chemical conditions |
Selected temperature-related applications |
Material selection should take into account the actual operating temperature, sealing medium and working conditions.
Before purchasing, verify:
Shaft diameter - 80 mm.
Housing bore diameter - 100 mm.
Seal width - 10 mm.
A/SC sealing profile.
NBR material.
Type of sealing medium.
Operating temperature.
Shaft rotational speed.
Operating pressure conditions.
Condition of the shaft and housing surfaces.
Matching dimensions alone do not guarantee interchangeability between seals manufactured from different materials or featuring different sealing profiles.
Correct installation has a significant influence on sealing performance and service life.
Thoroughly clean the shaft and housing bore.
Remove sharp edges and burrs.
Inspect the shaft surface that contacts the sealing lip.
Protect the sealing lip against damage.
Use an appropriate installation tool.
Press the seal evenly into the housing without tilting.
Provide suitable lubrication of the sealing lip during installation.
Maintain the correct installation orientation.
Do not install damaged or deformed seals.
In typical applications, the spring-loaded sealing lip faces the sealed medium. However, the final installation orientation must follow the equipment design and manufacturer's instructions.
NBR oil seals should be stored in a clean, dry environment, away from direct sunlight, heat sources and ozone.
Avoid prolonged deformation of the sealing lip and contact with substances that may adversely affect the elastomer.
Proper storage helps preserve the material's elasticity and sealing properties.
GRN® 80x100x10 NBR A/SC
GRN 80x100x10 Single-Lip Oil Seal
GRN 80x100x10 A/SC NBR
Single-Lip Radial Shaft Seal 80x100x10
NBR Oil Seal 80x100x10
Rotary Shaft Oil Seal 80x100x10
Rubber-Covered Oil Seal 80x100x10
Radial Shaft Seal 80x100x10 SC
Simmerring 80x100x10 NBR A/SC
Wellendichtring 80x100x10 NBR
These are technical naming variations, not verified OEM references or catalogue numbers from other manufacturers.
The seal has an inside diameter of 80 mm, an outside diameter of 100 mm and a width of 10 mm.
A/SC identifies a single-lip radial shaft oil seal featuring a spring-loaded primary sealing lip without an additional dust lip.
No. It is a single-lip design. The AO/TC profile, for example, includes an additional dust lip.
Yes. NBR provides good resistance to many mineral oils and industrial lubricating greases. Compatibility with the specific medium must be verified.
Permissible rotational speed depends on the seal design, material, shaft diameter, lubrication and operating temperature. The maximum operating speed must be confirmed in the product documentation.
Replacement may be possible in certain applications, but dimensions, sealing lip geometry and operating conditions must be checked.
The spring-loaded side generally faces the sealed medium. However, the equipment manufacturer's installation recommendations should always be followed.
It may be used in appropriately designed agricultural machinery mechanisms if its dimensions, profile, material and operating characteristics meet the equipment requirements.
GRN® 80x100x10 NBR A/SC is a single-lip radial shaft oil seal with an inside diameter of 80 mm, an outside diameter of 100 mm and a width of 10 mm. Manufactured from nitrile rubber, it features a spring-loaded primary sealing lip without an additional dust lip. Designed for sealing rotating shafts in appropriately selected industrial mechanical systems.
Available through the specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.
Data sheet
You might also like