O-ring 11x2.5 MVQ 70 Shore A - silicone rubber sealing ring with an inside diameter of 11 mm and a cross-sectional diameter of 2.5 mm. Nominal outside diameter 16 mm. Manufactured from MVQ silicone elastomer with a hardness of 70 Shore A. Offers good ozone resistance, resistance to atmospheric ageing and flexibility across a wide temperature range. Primarily designed for static sealing applications. Pack of 100 pcs. Available through the specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Product designation |
O-ring 11x2.5 MVQ 70 Shore A |
|
Product type |
Elastomeric O-ring seal |
|
Material |
MVQ - silicone rubber |
|
Inside diameter d1 |
11 mm |
|
Cross-sectional diameter d2 |
2.5 mm |
|
Nominal outside diameter |
16 mm |
|
Nominal hardness |
70 Shore A |
|
Cross-section |
Circular |
|
Primary sealing application |
Static sealing |
|
Package quantity |
100 pcs. |
The outside diameter of 16 mm is a nominal value calculated from the inside diameter and cross-sectional diameter. Exact dimensional tolerances, silicone compound formulation and permissible operating conditions depend on the specifications of the supplied product.
The dimensional designation identifies two principal O-ring measurements:
11 mm - nominal inside diameter.
2.5 mm - nominal cross-sectional diameter.
16 mm - calculated nominal outside diameter.
The outside diameter is calculated as follows:
The dimensions 11x2.5 mm describe the inside diameter and cross-section of the sealing ring, not the shaft diameter and axial width used to specify conventional rotary shaft oil seals.
MVQ is a designation for silicone rubber belonging to the VMQ/MVQ family of elastomers used in technical sealing applications.
This material is characterised by:
Good flexibility at low temperatures.
Resistance to atmospheric ageing.
Good ozone resistance.
Suitability for many elevated-temperature applications.
Good electrical insulating properties.
Stability under appropriately selected operating conditions.
Compared with NBR, silicone rubber generally provides better resistance to weathering but has limitations in tear resistance, abrasion resistance and compatibility with certain chemical media.
The designation 70 Shore A indicates the nominal hardness of the elastomer measured on the Shore A scale.
Hardness influences:
The sealing ring's resistance to deformation.
The required compression force.
Behaviour under compression.
Resistance to extrusion into a clearance gap.
Conformity to the sealing groove geometry.
A hardness of 70 Shore A does not automatically establish a particular pressure or temperature rating.
The MVQ O-ring 11x2.5 mm is a continuous elastomeric ring with a circular cross-section.
When installed in a correctly designed sealing groove, it undergoes controlled compression between the mating surfaces.
The resulting deformation generates contact pressure that restricts the passage of the sealed medium through the connection.
Silicone O-rings are particularly suitable for appropriately designed static connections where continuous sliding movement between the seal and the mating surface does not occur.
Typical configurations include seals for covers, housings, flanges and instrument components.
Using a silicone O-ring in reciprocating or rotary applications requires particular care.
Compared with many other elastomers, silicone rubber may exhibit lower abrasion and tear resistance.
For this reason, dynamic applications should only be considered after evaluating the mechanical design and operating conditions.
MVQ silicone rubber is known for maintaining flexibility at low temperatures and for its ability to operate at elevated temperatures.
In many technical applications, typical silicone compounds may operate within an approximate temperature range of -60°C to +200°C.
Important: This is a general characteristic of the MVQ material family, not a verified operating temperature range for the specific O-ring 11x2.5 MVQ 70 Shore A.
Actual temperature limits depend on the compound formulation, exposure duration and operating medium.
Silicone rubber generally offers good resistance to ozone, ultraviolet radiation and atmospheric ageing.
This characteristic is particularly relevant where seals may be exposed to air and changing environmental conditions over extended periods.
The compatibility of MVQ with the operating medium must be evaluated individually.
Silicone rubber is not universally resistant to all oils, fuels, solvents and chemical substances.
Certain media may cause swelling or deterioration of the elastomer's mechanical properties.
|
Feature |
MVQ 70 Shore A |
NBR 70 Shore A |
|---|---|---|
|
Material |
Silicone rubber |
Nitrile butadiene rubber |
|
Nominal hardness |
70 Shore A |
70 Shore A |
|
Low-temperature flexibility |
Generally very good |
Compound-dependent, often lower |
|
Ozone resistance |
Very good |
Generally limited |
|
Weathering resistance |
Very good |
Generally limited |
|
Resistance to many mineral oils |
Depends on medium and compound |
Generally good |
|
Abrasion resistance |
Generally limited |
Often better |
|
Typical applications |
Static seals and temperature-related applications |
Oil seals, hydraulic and pneumatic systems |
MVQ and NBR are not automatically interchangeable, even when both O-rings have identical dimensions of 11x2.5 mm and a hardness of 70 Shore A.
Silicone O-rings may be used in equipment requiring flexible static sealing and resistance to specific environmental conditions.
Typical application areas include:
Equipment housings and covers.
Measuring and control instruments.
Electrical and electronic equipment components.
Flanged connections with suitable groove geometry.
Equipment exposed to varying temperatures.
Industrial machinery and instrumentation.
Static connections requiring resistance to atmospheric ageing.
These are examples of applications for MVQ silicone rubber. The suitability of the exact 11x2.5 mm dimensions must be confirmed against the equipment design.
The MVQ material designation alone does not establish approval for food contact, drinking water or medical applications.
Before purchasing, verify the following:
Inside diameter of 11 mm.
Cross-sectional diameter of 2.5 mm.
Required hardness of 70 Shore A.
MVQ material compatibility with the operating medium.
Sealing groove dimensions.
Required compression level.
Operating temperature and pressure.
Static or dynamic sealing conditions.
Required dimensional tolerances.
Any material certification requirements.
An O-ring measuring 11x2.5 mm should not be replaced with a different size without checking the groove geometry and permissible deformation.
During installation, the surface of the silicone O-ring should be protected against mechanical damage.
Thoroughly clean the sealing groove.
Remove burrs and sharp edges.
Avoid using sharp tools when positioning the ring.
Prevent excessive stretching.
Do not allow the O-ring to twist during installation.
Use only assembly lubricants compatible with MVQ and the sealed medium.
Verify correct positioning before closing the connection.
Silicone O-rings should be stored in a clean, dry environment without excessive compression or stretching.
Although silicone rubber offers good resistance to atmospheric ageing, proper storage conditions help maintain the sealing ring's properties.
Natural product designation variations include:
O-ring 11x2.5 MVQ 70 Shore A
MVQ O-ring 11x2.5 mm 70 Shore A
Silicone O-ring 11x2.5 mm
Silicone Rubber Sealing Ring 11x2.5
MVQ Sealing Ring 11x2.5 mm
Silicone O-ring Seal 11x2.5
VMQ/MVQ O-ring 11x2.5
These are natural product naming variations, not confirmed OEM references or separate catalogue numbers.
The ring has an inside diameter of 11 mm and a cross-sectional diameter of 2.5 mm.
Its calculated nominal outside diameter is 16 mm.
MVQ refers to silicone rubber, an elastomer used in sealing applications requiring properties such as resistance to atmospheric ageing and flexibility across a wide temperature range.
It indicates a nominal elastomer hardness of 70 units on the Shore A scale.
This property affects the ring's deformation and behaviour under compression.
Silicone rubber generally provides good resistance to elevated temperatures.
However, the permissible temperature range of a specific product depends on the MVQ compound and operating conditions.
This depends on the oil type, temperature and elastomer compound.
MVQ should not automatically be considered suitable for every oil or lubricating grease.
MVQ generally offers better resistance to atmospheric ageing and extreme temperatures.
NBR is often more suitable for sealing many mineral oils and for applications requiring greater abrasion resistance.
It may be used only in appropriately designed applications.
Because of the mechanical characteristics of silicone rubber, static sealing applications are generally preferred.
Each package contains 100 pieces of silicone O-ring 11x2.5 MVQ 70 Shore A.
O-ring 11x2.5 MVQ 70 Shore A is a silicone rubber sealing ring with an 11 mm inside diameter, 2.5 mm cross-section and nominal hardness of 70 Shore A. MVQ provides resistance to atmospheric ageing and good flexibility across a wide temperature range. The product is primarily intended for appropriately designed static sealing applications. Supplied in packs of 100 pieces.
Available through the specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.
You might also like