Technical Specifications - O-ring 11x2.5 NBR 70 Shore A
|
Parameter
|
Specification
|
|
Product designation
|
O-ring 11x2.5 NBR 70 Shore A
|
|
Product type
|
Elastomeric O-ring seal
|
|
Material
|
NBR - nitrile butadiene rubber
|
|
Inside diameter d1
|
11 mm
|
|
Cross-sectional diameter d2
|
2.5 mm
|
|
Nominal outside diameter
|
16 mm
|
|
Nominal hardness
|
70 Shore A
|
|
Cross-section
|
Circular
|
|
Sealing application
|
Static and selected dynamic applications
|
|
Package quantity
|
100 pcs.
|
The nominal outside diameter of 16 mm is calculated as 11 + 2 x 2.5 mm. Actual dimensions are subject to manufacturing tolerances. Dimensional tolerance class, specific NBR compound and permissible operating conditions must be verified for the supplied product.
What Does O-ring 11x2.5 NBR 70 Shore A Mean?
11x2.5 - sealing ring dimensions
The first value specifies the inside diameter, while the second identifies the cross-sectional diameter.
-
-
2.5 mm - elastomer cross-sectional diameter.
-
16 mm - calculated nominal outside diameter.
Unlike rotary shaft oil seals, O-ring dimensions are generally specified using the inside diameter and cross-sectional diameter rather than shaft diameter, housing bore and axial width.
NBR - nitrile butadiene rubber
NBR is a synthetic elastomer widely used in industrial sealing applications, particularly in systems operating with mineral oils and lubricating greases.
Its characteristic properties include:
-
Good resistance to many mineral oils.
-
Compatibility with numerous industrial lubricating greases.
-
Elasticity that allows adaptation to mating sealing surfaces.
-
Suitability for selected hydraulic and pneumatic sealing applications.
-
Use in static and appropriately designed dynamic sealing systems.
However, NBR is not a universal sealing material.
Its resistance to ozone, weathering, certain solvents and elevated temperatures is limited.
The exact chemical and thermal resistance depends on the rubber compound and operating conditions.
70 Shore A - elastomer hardness
The designation 70 Shore A indicates the nominal hardness of the elastomer, measured on the Shore A scale.
Hardness influences several important sealing characteristics:
-
Resistance to deformation.
-
Compression force required for installation.
-
Behaviour under pressure.
-
Resistance to extrusion into the sealing clearance.
-
Ability to conform to mating surfaces.
A hardness of 70 Shore A is commonly used in industrial O-ring sealing applications.
However, this hardness does not automatically make the ring suitable for every operating pressure.
Construction and Operating Principle
The O-ring 11x2.5 mm is a continuous elastomeric ring with a circular cross-section.
When installed in a correctly designed sealing groove, the ring undergoes controlled compression between the mating surfaces.
This deformation creates sealing contact that restricts the passage of liquids or gases through the connection.
How does an O-ring provide sealing?
The initial sealing effect results from compression of the elastomer.
In suitable applications, fluid pressure can further energise the sealing contact.
Effective operation depends on:
-
Groove dimensions and geometry.
-
-
-
Elastomer hardness and properties.
-
-
-
-
Excessive compression, insufficient squeeze or unsuitable groove geometry may lead to leakage or premature seal deterioration.
Typical Applications of O-ring 11x2.5 NBR 70 Shore A
NBR O-rings are used in a wide range of industrial mechanical systems.
Typical applications include:
-
-
Pneumatic fittings and components.
-
-
Equipment covers and housings.
-
Threaded connections with suitable sealing grooves.
-
Pump components and fluid distributors.
-
Mechanical assemblies operating with mineral oils.
-
Static sealing connections in industrial machinery.
These are typical applications of NBR sealing rings, not confirmed equipment-specific applications of the exact 11x2.5 mm size.
Selection for a particular assembly must be based on the equipment manufacturer's requirements or appropriate engineering calculations.
O-ring NBR 70 Shore A vs Other Materials and Hardness Grades
|
Version
|
Characteristics
|
Main difference
|
|
NBR 70 Shore A
|
Standard nitrile rubber hardness
|
Suitable for many oil sealing applications under appropriate conditions
|
|
NBR 90 Shore A
|
Harder nitrile rubber compound
|
Greater resistance to extrusion under comparable conditions, but reduced flexibility
|
|
FKM/FPM 70 Shore A
|
Fluoroelastomer
|
Different chemical and temperature resistance
|
|
EPDM 70 Shore A
|
Ethylene propylene diene rubber
|
Often suitable for water and selected fluids; generally unsuitable for mineral oils
|
|
VMQ/MVQ 70 Shore A
|
Silicone rubber
|
Different temperature and mechanical characteristics
|
Sealing rings made from different elastomers are not automatically interchangeable, even when their dimensions and nominal hardness are identical.
NBR 70 vs NBR 90 Shore A
NBR 70 Shore A is more readily deformable than NBR 90 Shore A.
The harder NBR 90 version may offer improved resistance to extrusion into a clearance gap, but it requires different compression forces and may not provide the same sealing behaviour.
The correct hardness depends on pressure, groove design, surface condition and operating requirements.
NBR vs FKM/FPM
NBR and FKM/FPM are both used in industrial sealing applications.
However, they differ in chemical compatibility, thermal resistance, mechanical behaviour and cost.
Replacing NBR with FKM/FPM requires verification of the operating medium and installation requirements.
Selection and Interchangeability of O-ring 11x2.5 mm
Before purchasing, verify the following:
-
Inside diameter of 11 mm.
-
Cross-sectional diameter of 2.5 mm.
-
Required hardness of 70 Shore A.
-
NBR material compatibility with the operating medium.
-
Sealing groove dimensions.
-
Static or dynamic operating conditions.
-
Operating temperature and pressure.
-
Permissible deformation and extrusion clearance.
-
Required dimensional tolerances.
-
Resistance to ageing and environmental exposure.
Important: An O-ring measuring 11x2.5 mm is not automatically interchangeable with rings measuring 11x2 mm, 11x3 mm or 12x2.5 mm.
Even small dimensional differences can significantly affect compression and sealing performance.
Installation and Storage
Correct installation is essential to prevent premature damage and maintain sealing performance.
Installation recommendations
-
Thoroughly clean the sealing groove and mating surfaces.
-
Remove burrs and sharp edges.
-
Avoid excessive stretching.
-
Prevent twisting during installation.
-
Use a compatible assembly lubricant where required.
-
Do not install rings showing cracks, cuts or permanent deformation.
-
Verify that the ring is correctly positioned before assembling the components.
Storage recommendations
O-rings should be stored in a clean, dry environment, protected from direct sunlight, excessive heat and ozone exposure.
Avoid unnecessary stretching or deformation during storage.
Proper storage helps preserve the elastomer's sealing properties.
Alternative Designations and Technical Names
Natural product designation variations include:
-
O-ring 11x2.5 NBR 70 Shore A
-
NBR O-ring 11x2.5 mm 70 Shore A
-
-
-
Rubber Sealing Ring 11x2.5 NBR
-
-
O-ring Seal 11x2.5 mm NBR 70 Shore A
These are descriptive naming variations, not separate catalogue references or verified OEM part numbers.
Frequently Asked Questions
What are the dimensions of O-ring 11x2.5 NBR 70 Shore A?
The inside diameter is 11 mm and the cross-sectional diameter is 2.5 mm.
The calculated nominal outside diameter is 16 mm.
What does NBR mean in an O-ring designation?
NBR stands for nitrile butadiene rubber.
It is a synthetic elastomer commonly used in oil-resistant seals, hydraulic connections and pneumatic systems.
What does 70 Shore A mean?
70 Shore A indicates the nominal hardness of the rubber material.
This parameter affects the ring's deformation, compression characteristics and behaviour under mechanical loading.
Is NBR 70 Shore A resistant to oil?
NBR generally provides good resistance to many mineral oils and industrial lubricating greases.
Compatibility should be verified for the specific fluid, temperature and operating conditions.
Can O-ring 11x2.5 be used in hydraulic systems?
Yes, provided that the sealing groove, operating pressure, extrusion clearance and material compatibility are appropriate.
Suitability for a specific hydraulic application requires technical verification.
Can NBR 70 Shore A be replaced with FKM?
Not without checking the operating conditions.
FKM and NBR differ in chemical resistance, mechanical properties and temperature behaviour.
Is the outside diameter of this O-ring 16 mm?
Yes. The calculated nominal outside diameter is 16 mm.
Actual manufactured dimensions are subject to dimensional tolerances.
How many O-rings are included in one package?
One commercial package contains 100 pieces of O-ring 11x2.5 NBR 70 Shore A.
O-ring 11x2.5 NBR 70 Shore A - Key Technical Information
O-ring 11x2.5 NBR 70 Shore A is an elastomeric sealing ring with an 11 mm inside diameter and a 2.5 mm cross-section. Manufactured from nitrile rubber with a nominal hardness of 70 Shore A, it is suitable for appropriately designed static and selected dynamic seals. NBR offers good resistance to many mineral oils. Supplied in packs of 100 pieces.
Available through the specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.